Ready for official release- ATS*Mark's 2000 civic 3dr done and driving.
#1
OG triple OG
Thread Starter
Ready for official release- ATS*Mark's 2000 civic 3dr done and driving.
many of you might remember the buildup thread a while back. i wanted to let that die and make a new thread showing the buildup , how it sits today and give thanks to the people who helped and supported me. to sum up the goal of the build, it was to get this ek to do everything , drive to and from the track, strip , show or meet and look good while doing it. needed to be streetable enough for me to drive whenever i want.
here is the basic rundown of mods the car currently has:
Exterior:
ctr front lip
ctr rear lip
ctr grill
ctr tail lights
spoon wing
spoon mirrors
vision hood
seibon cf hatch
arc ek9 magic wings
ek sidemarkers
silverstone metallic paint
16x7 volk ce28n diamond black
moroso battery jumper terminals
Interior
full chromoly 10 point custom cage done by redzone performance
bride zeta 2 bucket seat
vision super low rail
takata 5 point harness
ctr climate control
spoon cluster
spoon shift ****
circuit hero shifter extender
spoon steering wheel
fet quick release
interior color is battle ship grey
suspension
14k/10k tein RA dampers
spc front and rear camber kits
spc rear tow link
lcon traction bars
spc rear lower control arms
comptech sway/tie combo
spoon front strut bar
spoon rear strut bar
energy suspension bushings all around
arp extended studs all around
spoon calipers
2000 itr 5 lug conversion
hawk hp+ pads all around
earls ss brake lines
engine:
b18c5 GE sleeved block
85mm wiseco 11.5:1 comp pistons
eagle rods
spoon crank
GE geadgasket
moroso oil pan
p73 portflow head
supertech high comp valves
supertech retainers
skunk2 pro series springs
skunk2 pro2 cams
skunk2 pro series cam gears
skunk2 pro series cam seal
skunk2 pro series vtec solenoid cover
msd dizzy cap
msd blaster 2 coil
spoon spark plug wires
toda timing belt
gsport starter
hytech header
innovative 85a mounts
4.7fd type r tranny
toda flywheel
redzone 6puck unsprung clutch
twm 52mm itb's
rc 440 injectors
aeromotive 100 micron fuel filter
cusco MC brace
fluidyne radiator
billion radiator hoses
billion radiator cap
billion thermo checker
some custom fabrication that was done to the car(im sure im forgetting stuff i will add as i remember)
msd coil mount
10 point roll cage
mounting of the engine fuse box under the dash.
battery bracket to mount in the back bumper
cutting of the rear seat brackets and filling holes
new passenger front brake line to hug bottom shock tower
now on for the pics , these are pics of the teardown , buildup and final completion. enjoy and if u have any questions please ask.
breakin her down.
tars out
main hoop in
boxing the rear for the bars to mount
rear bars tacked and harness bar mounted. seat is in for mocking of the door bars
the seat
through dash
door panels mounted to make door bars
floor plates
look at that fitment
some of the parts used
here she is completed, finished up the night before the JDMTHEORY show it was real nice to be able to drive it there and show it . i was real happy to see the responses from people it made me feel great. won a plaque for best engine bay too
biatches thought the cameras were on them
heres a video of the first fireup!
i would like to thank first and foremost , is Jeremy , Brandon and Wayne at redzone performance . for all their hard work helping me get this car done . it wouldnt have been possible without you guys, the fabrication is second to none and the effort shows . those all nighters really paid off. thanks to ron and jeremy for helping me paint the engine bay and interior i think it looks pretty good , and with the use the interior will get we can patch it anytime. aj with the wiring , your the **** and the headlight harness looks non exsistant! fred for helping install my motor. thanks to all the friends for the support , and last but not least ATS Garage family fo life
also thanks to all the shops for their help
modacar.com
jhpusa.com
inlinefour.com
weksos.org
and to anyone else i forgot thank you
Modified by ATS*Mark at 10:12 PM 1/29/2007
here is the basic rundown of mods the car currently has:
Exterior:
ctr front lip
ctr rear lip
ctr grill
ctr tail lights
spoon wing
spoon mirrors
vision hood
seibon cf hatch
arc ek9 magic wings
ek sidemarkers
silverstone metallic paint
16x7 volk ce28n diamond black
moroso battery jumper terminals
Interior
full chromoly 10 point custom cage done by redzone performance
bride zeta 2 bucket seat
vision super low rail
takata 5 point harness
ctr climate control
spoon cluster
spoon shift ****
circuit hero shifter extender
spoon steering wheel
fet quick release
interior color is battle ship grey
suspension
14k/10k tein RA dampers
spc front and rear camber kits
spc rear tow link
lcon traction bars
spc rear lower control arms
comptech sway/tie combo
spoon front strut bar
spoon rear strut bar
energy suspension bushings all around
arp extended studs all around
spoon calipers
2000 itr 5 lug conversion
hawk hp+ pads all around
earls ss brake lines
engine:
b18c5 GE sleeved block
85mm wiseco 11.5:1 comp pistons
eagle rods
spoon crank
GE geadgasket
moroso oil pan
p73 portflow head
supertech high comp valves
supertech retainers
skunk2 pro series springs
skunk2 pro2 cams
skunk2 pro series cam gears
skunk2 pro series cam seal
skunk2 pro series vtec solenoid cover
msd dizzy cap
msd blaster 2 coil
spoon spark plug wires
toda timing belt
gsport starter
hytech header
innovative 85a mounts
4.7fd type r tranny
toda flywheel
redzone 6puck unsprung clutch
twm 52mm itb's
rc 440 injectors
aeromotive 100 micron fuel filter
cusco MC brace
fluidyne radiator
billion radiator hoses
billion radiator cap
billion thermo checker
some custom fabrication that was done to the car(im sure im forgetting stuff i will add as i remember)
msd coil mount
10 point roll cage
mounting of the engine fuse box under the dash.
battery bracket to mount in the back bumper
cutting of the rear seat brackets and filling holes
new passenger front brake line to hug bottom shock tower
now on for the pics , these are pics of the teardown , buildup and final completion. enjoy and if u have any questions please ask.
breakin her down.
tars out
main hoop in
boxing the rear for the bars to mount
rear bars tacked and harness bar mounted. seat is in for mocking of the door bars
the seat
through dash
door panels mounted to make door bars
floor plates
look at that fitment
some of the parts used
here she is completed, finished up the night before the JDMTHEORY show it was real nice to be able to drive it there and show it . i was real happy to see the responses from people it made me feel great. won a plaque for best engine bay too
biatches thought the cameras were on them
heres a video of the first fireup!
i would like to thank first and foremost , is Jeremy , Brandon and Wayne at redzone performance . for all their hard work helping me get this car done . it wouldnt have been possible without you guys, the fabrication is second to none and the effort shows . those all nighters really paid off. thanks to ron and jeremy for helping me paint the engine bay and interior i think it looks pretty good , and with the use the interior will get we can patch it anytime. aj with the wiring , your the **** and the headlight harness looks non exsistant! fred for helping install my motor. thanks to all the friends for the support , and last but not least ATS Garage family fo life
also thanks to all the shops for their help
modacar.com
jhpusa.com
inlinefour.com
weksos.org
and to anyone else i forgot thank you
Modified by ATS*Mark at 10:12 PM 1/29/2007
#5
Honda-Tech Member
Join Date: Jun 2001
Location: FREQUENCY8
Posts: 15,519
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ready for official release- ATS*Mark's 2000 civic 3dr done and driving. (ATS*Mark)
you forgot to list your stage 3 weight reduction from last night
props on a crazy build mark
props on a crazy build mark
#7
OG triple OG
Thread Starter
Re: Ready for official release- ATS*Mark's 2000 civic 3dr done and driving. (Spoonspeed)
heres another one , ill post them as i see them surface on the internet , i didnt take pics of the car yet lol
Trending Topics
#10
Honda-Tech Member
Re: Ready for official release- ATS*Mark's 2000 civic 3dr done and driving. (Airbag Club)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Airbag Club »</TD></TR><TR><TD CLASS="quote">sickness </TD></TR></TABLE>