crazes

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

SPOOLINmatt

...

rexpulley

PTE 7285 gen2. Used but in perfect shape $2800
Liberty b series gear set. 3.0,1.94,1.36,1:1 4.4fd
In perfect shape. Recently inspected and replaced 4th gear.
Located in Idaho falls. Would prefer pickup but will ship at buyers expense
432-271-0454

NAVY AWS

Changing some things up for this season so i have these for sale. Parts have 6 passes on them. Text 75781829one7 for fastest response.

GRP aluminum rods (GSR stroke)-$450 ***PISTONS SOLD***

E Town DSM

Name: Ricky Silva
Location: Woodbridge, NJ
Email: Juice2435@aol.com
Prices DO NOT include shipping or Paypal fees.

For Sale: Used Back door intercooler setup. 24x12x4.5" Garrett Core. 3 inch charge pipes. Custom end tanks. Setup for a large frame t4 turbo on a full race top mount. Vanjen clamps through out. Will fit behind a stock ek front bumper. Will also fit other turbo setups. Same exact intercooler setup that I went 8.49@181 with last season. Everything is in perfect working condition. 2 Upper ic pipes one for JG manifold other for pro jay. SOLD


Hyper Coil Springs all 2.5 diameter. Used on a race car very low use only a few passes.
8"- 750lb- $100 pair
8"- 600lb- $100 pair (not pictured)
10"- 450lb- $100 pair (not pictured)


Used window net 18"x22" with brackets as pictured- SOLD

used 99 Civic black housing headlights. Driver side is cut out for air inlet for turbo- SOLD

Used GRP Aluminum Rods with about 40 passes. GSR Stroke/ .866 wrist pin. 3\8 ARP2000 Bolts.-SOLD

T76U13ALT

Up for sale is set of 2 brand new Weld Magnum 2.0 wheels, bought them a while back for my FWD car but now I have decided to go another route.

15x10
5x4.50/114.3 Nissan/Toyota/Ford Pattern
7"s Wheel sits more inside the wheel or less stick out.

$950 shipped plus paypal fees in the USA
OBO

AZ_CIVIC

iTrader: (1)

I have for sale my Skunk2 Pro Series Cam Gears. These are in excellent condition and I just pulled them off my car. These are great cam gears and have done very well with my setup. I am looking to get $150 OBO. Brand new on the Skunk2 website these are around $264.

Text me at 480-371-8066
PayPal Certified

ninesecrx

I am selling this complete running 1988Honda crx drag race car. It has lots of mods, fully built engine anda bunch of high end parts. Car will need to be tuned before raced.Engine was built to run on nitrous or turbo. Should still run hard ifran all motor if you like. ***$6,000*** OBO
12 point cage
tin work
Autometer tach and gauges
Painless switch panel
cnc stage brake
simpson cam lock 5 point harness andwindow net
full lexan windows with fast releasedzuz fasteners
straight rear single axle with torsionbar
Mugen body kit shaved in with greatcondition paint
Jazz race seat
MB fiberglass 1 piece front end
comes with a set of front racing slicks
1 gallon Jazz fuel cell
breather box
msd 6al ignition with blaster 2 coil
scatter shield for transmission
race clutch with aluminum flywheel
steel braided lines all over
B series motor mounts for swap
energy suspension bushings through out
bosch fuel pump
tokico 5 way struts
DC header
Skunk2 intake manifold
aem intake
magnacor spark plug wires
Neuspeed front strut tower bar
BDL throttle body
SX fuel filter and fuel pressureregulator
vortech fuel rail and fuel injectors
obd1 wiring
RC cam gears
Head has been port and polished, Crowercams, Crower dual springs and retainers, ARP head studs
Bottom end has Crower rods, JE pistons,Benson sleeved block Attached Images <a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]"><a href="https://honda-tech.com/attachments/drag-racing-36/406942d1449611511-dec-fs-thread-2_zpsxwym2rh4.jpg" rel="lytebox[attachs]">

j_ovi

Autometer sport comp guages.
$120 obo. Came off a 94 civic
Also a Avenue steering wheel
$150 obo.

Located in Columbus Ga.

phantom_bcw84

I parted out my integra and selling the parts i still have or didn't use. PRICES DO NOT INCLUDE SHIPPING OR PAYPAL FEE

best way to get ahold of me is text 505-814-4574

first is Full Blown dual pump hanger never used. just taken out of box for pictures

price $250

golden eagle GFR100 fuel rail

price $100

Full Race Pro-am traction bar the bar that goes from bar to engine has never been used

Price $250

V2 competition rims and ET drag slicks 24.5x9x13 7 passes on them only 4 launches in boost still a ton of tread

ALL IMPORT

NOTICE SOME PARTS HAVE BEEN SOLD .

CONTACT INFO..!!!!! TIM 561-644-3876

some of you might remember this project so here it is all laid out for sale.
almost every part is brand new never been used or ran except a few small misc parts.

so much extra info on everything its to much to say so if you are serious about purchasing here is my contact info.
if you have any questions u can call me ( talking instead if text is way faster & easier to communicate IJS). Tim 561-644-3876
I am willing to do package deals on basically everything, I will even part out the motor.



The list.
chassis shell. comes with front & factory tail lights all harnesses & interior (doors are quick release) 1,500$
jojo front end.(6 zeus comes off in 1pc) 500$
front control system with
(ceramic wheel bearings & traction bars) 800$
custom rear end ( willwood light weight) 650$ SOLD
Strange suspension 850$ SOLD
rims & tires. front & rear(exospeed 15,s 26x10) 2,200$
rear wing system 250$
Strang chute(blue) & mechanical release 750$
meziere water pump set-up 320$

I AM WILLING TO DO A DEAL ON THE ROLLING CHASSIS with parachute & all parts u see in the pic. minus rear custom arms & shocks, they are sold. but can get factory stuff back on.
Tim 561-644-3876

engine was built by TEX BRE Motorsports.
u can call to verify anything. motor is fully
built & ready to make 1000whp+
no expense was spared.
BLOCK
LS crank
Darton sleeves O-ringed
GRP aluminum rods
billet girdle
CP 10.1 pistons upgraded pins
ATI Damper
Moroso alumimun oil pan
9k for commplete long block. BLOCK IS SOLD>

Head
GSR head 5 axes CNC port
RARE MOROSO valve cover..
Ferrea roller system.
BRE custom Ferra turbo cams, valves, EVERYTHING.all the goodies...


turbo system Setup.
PT 7275-B Billet wheel & Ball bearing. 2,000$ SOLD
dual Tial 44MM MV-R gates. 550$ SOLD 1 ::: 1 left
custom manifold (Backpurged) 500$
Custom BMC intake. 1,500$

misc parts list
Aem data gauge 100$
Sparco seats 250$
sparco harnesses 150$
dble gauge holder 75$
Tach Auto meter 100$
Aem fuel rail with line & guage 130$ shipped
anythying else u see just ask , lol

EF'n Sedan

iTrader: (1)

Sold.

Mr1835

Race Parts
Precision 6765 jb t-4 .81 mint $700

Holset HX52 67mm billet t-4 16cm2 hotside SOLD!!!

Precision 6152E t-4 .58 has some mild shaft play needs rebuild SOLD!!

Weld magnum 4x100 13x10 (5 inch bs)with brand new 24.5x9x13 MT`s screws too $900

AEM 10 channel peak and hold injector driver $125.

Bosch white tops 160# low z injector 4 in the set $150

buyers pays all fees
Local pick in NJ preferred.



[

carbon fiber coupe

iTrader: (2)

looking at selling everything COMPLETE
**late last year I took over the head coaching job for wrestling where I was coaching football and I coach my sons summer baseball team and coach HS football WAAAAY to much on my plate to be able to run this car**

not interested in parting out at the time I want to sell everything together
**would be EASY way to part out and make some extra cash**

car the way it sits has run 10.6 @131 on c16
on pump gas car goes 11.0-11.2

eg hatch
red paint is ok , has a couple small rust bubbles on qtr not bad though
carbon fiber hood and hatch
ccc carbon wrapped drag wing
Omni power drag coilovers
sk2 camber kits all the way around
wide front
lenso slick/skinnys both have tires (also have a extra set of slicks)
gsr motor (piston and rods) stock sleeves
head has inline pro springs and retainers
inline pro old school cast turbo mani
precision 750hp IC
edlebrock intake mani
garrett t4 60-1
wally 255 pump
rc1000s
twin disc
gsr trans w/cuff and quaife lsd
3.9 axles
s300

car currently doesn't have a cage (I wont run it until I get one)

now for the extra parts I have to include in the price

fully built 1.6 GE sleeved block
carrillo/CP
ati damper
b16 head
sk2 pro1
supertech springs and retainers
all new belts and gaskets
**motor has zero miles ready to be installed**

EXTRA turbo kit
sheepy top mount
brand new 6266 t4 open
AFI hand polished intake mani
1000+ hp fuel setup
all braided lines , bosch 044's , fuel cell

extra twin disc with some dyno time on it
5.9 axles w/new hubs and hardware
aluminum catch pan
golden eagle scatter shield
I have complete carpet and rear seats to include as well
catch can setup w/lines and itr valve cover

I may be leaving some things out look through the pics, NO ebay parts on this build
everything is name brand in great condition

slap the motor in , bigger axles and turbo kit/fuel system and run 9's

I will also include a 16ft open car trailer

price is 13,000 I'm located in cincy ohio
513 403 9282 call or text (text for faster response)

do the math just on the parts that I'm including
built long block was 7k alone
AFI intake 800
6266 1k
5.9 axles 1k
extra twin disc 1k
just those items not including the car 10k+



nc6 by 93 red ls, on Flickr

nc5 by 93 red ls, on Flickr

nc4 by 93 red ls, on Flickr

]nc3 by 93 red ls, on Flickr

nc2 by 93 red ls, on Flickr

nc1 by 93 red ls, on Flickr


IMG_20150317_200105785 by 93 red ls, on Flickr


IMG_20150317_191832993_HDR by 93 red ls, on Flickr

IMG_20150602_174605 by 93 red ls, on Flickr

IMG_20150602_172223750 by 93 red ls, on Flickr

IMG_20150602_172116487 by 93 red ls, on Flickr

IMG_20150602_172103464 by 93 red ls, on Flickr

IMG_20150602_172024697 by 93 red ls, on Flickr

IMG_20150602_171942518 by 93 red ls, on Flickr

IMG_20150602_171817277 by 93 red ls, on Flickr

[/url]IMG_92783386366148 by 93 red ls, on Flickr

IMG_92776206540114 by 93 red ls, on Flickr

IMG_31013802898068 by 93 red ls, on Flickr

darnizzle8805

iTrader: (1)

Moroso B-series oil pan, LS/B20 pickup bought used, slight damage to the baffle shown in pictures but doesn't affect the pan in any way.

$225 OBO SHIPPED

98B18C1

iTrader: (1)

Fluidyne Dual core half sized aluminum radiator with Blox 12" slim fan and black silicone race Samco hoses. Was used on my turbo GSR without any issues. Never seen any overheating and does not leak! Asking $300 shipped OBO

5 gallon of ERC A-8D (comparable to C16) new never used. I used this gas on my previous turbo setup and never had an issue. Also easy to get since the shop is located in bay area. Asking 75 bucks picked up

flycivicsi

iTrader: (5)

*Please Read Whole AD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.

I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.

Text or pm 306 551 5139


- Eg rolling shell - $3200NO PART OUTS ON THIS ITEMS LISTED BELLOW
$7000 Brand new eve red paint exterior and interior not engine bay though with new $3000 oem Honda inner and outer quarter panels
carbon fiber doors
skunk2 coils
skunk2 mega power exhaust with hks cf ti muffler
aftermarket steering wheel, gauges + more
Takata harness
sparco harness bar
cf towel
cf rear strut bar
sir cluster with 26,000kms
cf Hood, trunk duck bill
+more

NO rims, Fuel lines, Fuel tank, Brake lines, seats motor or fenders they are all gone or

- Complete 800+ fuel system - Was out of an e.g. coupe so should work on almost anything-Sold
Dual Bosch 044 fuel pump
Dual Bosch fuel pump Hanger
2 Filters with hangers
8an Feed and return line
Resistors and wiring
5 gallon jw fuel cell
Aeromotive FPR

- fuel AN line and fittings purchase from brfittings.com
Pro flow 300 series black nylon braided line x 18' of -10an - Retail $135 will sell for $120
Pro flow 300 series black nylon braided line x 13' of -10 - Retail $97.5 will sell for $80
Pro flow 300 series black nylon braided line x 13' of -8an - retail $84.5 will sell for $70
4 x Black 10an fitting straight - retail $40 will sell for $30
3 x Black 10an fitting 90 degree - Retail $51 will sell for $40
3 x Black 10an fitting 45 degree - Retail $51 will sell for $40
1 x Black 8an fitting straight - retail $8 will sell for $5
1 x Black 8an fitting 90 degree - retail is $15 will sell for $10
- APR CF mirrors - Require new clear coat for eg - $130 shipped

- EG CF Hatch used not sure of brand comes complete with tail lights - $350 shipped

- Kirkley Drag Seat with rail that bolts to the floor with cover(is dirty needs just a vacuum very little use) - $270 shipped

- AEM BNIB Wide Band with sensor - sold

-new Energy Suspension BNIB bushing set for e.g. - $100 shipped

- BNIB Hybrid racing gauge - $30 shipped

- FCS Fuel cell 9 gallon Brand new never mounted comes with fittings shown - $650 shipped

- BNIB Hondata Intake manifold gasket k24/k20z3 - sold

- K series Gforce Long series shift kit used but very little NO NEED for cables - $800 shipped

- BNIB Ktuned TPS Sensor - Sold

- Legit Bride Carbon Fibre bucket seats No rails(The passenger side has some new fabric put on the one side it does not quite match) - $1800 + shipped

- ID1000 injectors Used(Not sure if they are ID i can't find any markings so might not be) were working perfectly when pulled- sold

- RPM 72mm B series Throttle body (idle time only) Missing a set screw comes with 3" v band and clamp- $100 shipped

- Tig welded Intercooler mounting bar comes with 2 bolts to mount - $150 shipped obo

- Sheepey K series brand new t4 manifold(60mm gate) 4" up pipe and Up tube will not seperate - $1100 shipped

- Brand new in box project kicks lug nuts (20pcs) - Sold

- Honda s2000 clutch maser cylinder(replaces the ugly stock one need a spacer though) - $60 shipped

- brand new Chase bays Fenderwell brake lines BNIB - sold


- chase bays coolant overflow BNIB - sold

- brand new Chase bays Brake line relocation kit interior - sold

- new Chase bays wildwood cylinder BNIB - sold

- Used AEROMOTIVE filter with fittings - $50 shipped

- Dual 044 fuel pump hanger billet steel brand new - $50 shipped

-K20z3 head not sure of shape comes with whats shows - $150 + shipping

- K24 block bare with only mains would need honing and so forth - $200 shipped

- Smax front mount intercooler with co2 bottle, lines, and actuator( allows you to run c02 directly through your intercooler will separate parts and its not 100% complete - $350 shipped

- DSS 5.9 k series hubs used but not a lot - $250 shipped


more to come

EG Shell
Before the build began

Current state



Fuel system


Fuel line


APR CF Mirrors


eg hatch


Drag seat


AEM Wideband


Bushings


GAUGE


FCS


Hondata gasket


Force


tuned sensor


Bride seats


ID injectors


RPM


Bar


sheepey


Project


cb fenderwell


coolant overflow


relocation kit


willwood



aeromotive


Dual Hanger


k20z3 head


k24 block


smax


Dss

hondatech8798

iTrader: (2)

m&w pro14 with t1 harness with firewall cannon connector, everything is brand new never used comes with all necessary pins to wire it to ecu ect

digital sol

iTrader: (1)

As much as it pains me to start listing parts for sale I need money to move out & this is my best option at the time. I have been collecting parts for my dream build for 6+ years. Everything in the pictures will be sold but I am only listing big ticket items for the time being as those need to go first. Prices are pretty firm as most of this stuff is extremely top end. Don't throw trades at me, i cant buy a house with your trades. My power goal for this build was 450-500whp on pump & 600whp on e85.






1) Hytech Turbo Manifold w/t4 flange and polydine coating, this will come with a t3 to t4 adaptor as well. This manifold is a work of art in itself and puts the turbo directly above the transmission. I also have an a2w intercooler etc if the buyer is interested. This price is only the manifold.

Price: $1350













2) Benson sleeved/built B18 short block - 0 miles & kept inside and wrapped. Mike from Laskey Racing built & assembled the short block.
Price: $2000










-84mm CP 10:1 comp pistons
-Eagle Rods
-LS Crank/Micropolished
-Type R oil pump
-Type R water pump

3)Head: Purchased this used from another member on this forum from a running car that had a few passes on it. I have not torn this down nor sent it out anywhere, was going to send it with the shortblock for cleaning & final assembly.
Price: $1000
Alaniz Built
-skunk 2 pro valves
-supertech springs and retainers
-supertech seals
-new guides
-alaniz pro valve job
-cambers open up to 84mm
-stock ports






Turbo: Shodan built
GT3540S, 71mm wheel
Price: $1200

94turbosi

iTrader: (1)

Gtx 4502r excellent condition 71.8 mm sfwd legal 128A/r divided exhaust housing t4 dual ball bearing 2k Obo plus shipping and PayPal fees

b18c1Monster

Motec m84 with advanced functions unlocked. Lamda,traction control,launch control etc. ($550 option)
1900 obo.

CHEETAH

iTrader: (2)

PM or text 917273443one,greg


Mini fluidyne race radiator... $best offer



Carbon fiber lean mount intake for any size Kinsler ITBs... $500



RSX shifter box with used Karcepts shifter plate and Razo short shifter... $126



Use clutch type K series LSD unknown brand but similar to Spoon/Mugen/ATS/KAAZ etc. With speed sensor with drive gear... $500neg



Brand new XS 16volt racing battery with charger $make offer

zuptidi

4Piston 163 CRV Head (Vtec Killer) For Sale

Only reason i'm selling is to get another PRB 163 head for I-vtec, for Circuit racing/street.
Head has about 10 passes at the dragstrip
and 200miles (if not less) street driving.

Bare Head w/ Valves = 1650$ shipped + PP fees


Add k20a2 Rockers w/Inline Pro Vteclock kit = 100$ More

I'll be keeping the cam capsand sensors..
Made 369whp on M5 on a 88x99mm JBRE build..

Bizarre

Sold my integra, so I'm selling the left over parts I have from my build.

All parts are located Toronto,Ontario, Canada. Prices are in USD. Shipping costs (I'll split with you) and Paypal Fee's not included in the prices.

1. Hondata S300V2. Installed in P28 ECU and has the PWM components added for boost control - $500





2. BNIB Garrett Intercooler Core. Dimensions are 18x8x3. Rated at 500HP - $260





3. BNIB Golden Eagle Main Girdle Kit. Includes CNC Machined girdle, ARP Main Studs, OEM Honda windage tray and oil pickup. Was going to be used in LS B18 block, but according to GE's site it should work in B20 and B16 motors. $480






Will add more items as I go through my stuff. Feel free to PM with any questions or concerns. Thanks

ALL IMPORT

NOTICE SOME PARTS HAVE BEEN SOLD .
some of you might remember this project so here it is all laid out for sale.
almost every part is brand new never been used or ran except a few small misc parts.


IF U HAVE ANY QUESTIONS U CAN CALL ME..!! ( talking instead if text is way faster & easier to communicate IJS). TIM 561-644-3876

I am willing to do package deals on basically everything, SHORT BLOCK IS SOLD .

COMPLETE HEAD LEFT ONLY..



The list.
chassis shell. comes with front & factory tail lights all harnesses & interior (doors are quick release) 1,500$
jojo front end.(6 zeus comes off in 1pc) 500$
front control system with
(ceramic wheel bearings & traction bars) 800$
custom rear end ( willwood light weight) 650$ SOLD
Strange suspension 850$ SOLD
rims & tires. front & rear(exospeed 15,s 26x10) 2,200$
rear wing system 250$
Strang chute(blue) & mechanical release 750$
meziere water pump set-up 320$

I AM WILLING TO DO A DEAL ON THE ROLLING CHASSIS with parachute & all parts u see in the pic. minus rear custom arms & shocks, they are sold. but can get factory stuff back on.
Tim 561-644-3876

engine was built by TEX BRE Motorsports.
BLOCK IS SOLD>
Head
GSR head 5 axes CNC port
RARE MOROSO valve cover..
Ferrea roller system.
BRE custom Ferra turbo cams, valves, EVERYTHING.all the goodies...


turbo system Setup.
PT 7275-B Billet wheel & Ball bearing. 2,000$ SOLD
dual Tial 44MM MV-R gates. 550$ SOLD 1 ::: 1 left
custom manifold (Backpurged) 500$ SOlD
Custom BMC intake. 1,500$

misc parts list
Aem data gauge 100$
Sparco seats 250$
sparco harnesses 150$
dble gauge holder 75$
Tach Auto meter 100$
Aem fuel rail with line & guage 130$ shipped
anythying else u see in the pics just ask , lol