adSPEED/RLZengineering Street/SFWD EG hatch Complete... 56K NoNo
08-19-2006, 09:10 AM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: Charlotte, NC, USA
Posts: 1,242
Likes: 0
Received 0 Likes
on
0 Posts
adSPEED/RLZengineering Street/SFWD EG hatch Complete... 56K NoNo
ok after a long year, i can finally say i am done with my car.. last night we setup the final stages such as boost control, high low boost etc.. car is tuned on Hondata S300 by Howard at RLZ. It was tuned on 30-32 psi, on c16.. we made 732 WHP and 460 WTQ which is more than enough for me.. Howard will post the dyno sheet when he has some free time..Setup is as follows:
85 MM GSR
Custom Weiscos
Manley Rods
Custom Wrist Pins
GSR Crank
RLZengineering Head
Full Race Top Mount GT4088R Turbo Kit
This car would not be complete without all the help i got from RLZengineering... many late nights, some full 24 hour days, big thanks to Howard and Brad..
Some pics:
http://img101.imageshack.us/img101/6629/im002538qy8.jpg[/IMG]
Sorry bout the size fellas... and gals...
85 MM GSR
Custom Weiscos
Manley Rods
Custom Wrist Pins
GSR Crank
RLZengineering Head
Full Race Top Mount GT4088R Turbo Kit
This car would not be complete without all the help i got from RLZengineering... many late nights, some full 24 hour days, big thanks to Howard and Brad..
Some pics:
http://img101.imageshack.us/img101/6629/im002538qy8.jpg[/IMG]Sorry bout the size fellas... and gals...
08-19-2006, 11:37 PM
#14
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: Charlotte, NC, USA
Posts: 1,242
Likes: 0
Received 0 Likes
on
0 Posts
went to the track this afternoon... got only 3 psses in and the boost control stopped working after the 1st pass.. since this is my st time with the new setup at the track i wanted to take i easy the 1st pass... so i set up my 1st gear at 1 bar (14.7 psi) 2nd gear at about 18 psi, 3rd at 24 and 4th at 30.... anyways, after leaving ith no anti lag and shity 8th mile trap and time my 1st pass i went a 10.4 @ 146 mph... 2nd pass i was ready to up the boost a bit and start getting comfy with my setup... so i uped the lower gears to 20ish psi, and 3rd and 4th to 35... i leave the line an notice that im runing wastegate spring... 1 bar, still ran a 10.7 @ 132 on 14 psi... next pass same result... my boost control just gave out, i think the selonoid gave out, because the computer was doing wat it was suposed to, but didnt see like the selonoid responded... anyways i am going to try the new AEM selonoid, and see if that works out... next sat i will be at the rock again... =
08-20-2006, 07:34 AM
#16
Trial User
Join Date: Aug 2004
Location: Charlotte, nc, us
Posts: 1,065
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boostage)
not a bad first time at the track, we had fun for sure...im sure next pass's there will be some good times that we have been expecting for a while now
08-20-2006, 07:49 PM
#21
Re: (G"UNIT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nickromeo »</TD></TR><TR><TD CLASS="quote">are u going to put out a sick video like last time.
that is my favorite ht video evar.</TD></TR></TABLE> x2
Those low-boost times look pretty sick, keep up the awesome work
that is my favorite ht video evar.</TD></TR></TABLE> x2
Those low-boost times look pretty sick, keep up the awesome work
08-20-2006, 11:08 PM
#24
Junior Member
Join Date: Apr 2005
Location: char, nc, us
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boostedcivicsir)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivicsir »</TD></TR><TR><TD CLASS="quote">D BARS ARENT LEGAL.
just funnin. nice setup. hope to catch you at some events.</TD></TR></TABLE>
D bars arent legal??? wat are you saying?
just funnin. nice setup. hope to catch you at some events.</TD></TR></TABLE>
D bars arent legal??? wat are you saying?