FS: 81mm Arias Pistons and GSR Eagle Rods
#1
Man U FTW
Thread Starter
FS: 81mm Arias Pistons and GSR Eagle Rods
Up for sale is a set of Pistons and rods which i had planned to use for my GSR build; however, i bought a built LS from a friend at a great price and no longer have use for these. They are slightly used ~3000 miles, but in good condition. They will need a new set of rings before use since its never a good idea to reuse them (and they're not included ).
<u>Specs</u>
-81mm Arias pistons
-9:1 compression
-No rings included
-GSR Eagle Rods
<u>Price: $500 shipped within the Lower 48</u>
http://www.boomspeed.com/fnananon/pistonsrods.jpg
http://www.boomspeed.com/fnananon/pistonsrods2.jpg
http://www.boomspeed.com/fnananon/pistonsrods3.jpg
http://www.boomspeed.com/fnananon/pistonsrods4.jpg
http://www.boomspeed.com/fnananon/pistonsrods5.jpg
http://www.boomspeed.com/fnananon/pistonsrods6.jpg
http://www.boomspeed.com/fnananon/pistonsrods7.jpg
http://www.boomspeed.com/fnananon/pistonsrods8.jpg
http://www.boomspeed.com/fnananon/pistonsrods9.jpg
http://www.boomspeed.com/fnana...1.jpg
http://www.boomspeed.com/fnana...2.jpg
http://www.boomspeed.com/fnana...3.jpg
http://www.boomspeed.com/fnana...4.jpg
http://www.boomspeed.com/fnana...5.jpg
I also have a 99 GSR shortblock for sale. It is in need of a new set of bearings in the bottom end since i took it apart for this build and hastily reassembled it in order to clear up some clutter in the garage. The bearings were put in wherever they fit (since we had planned to replace them anyway) and aren't matched to their original rod/journal/pair bearing. The engine has not been run in this condition obviously. For those who are interested, i can get you pictures of the cylinder walls and pistons. It is in great condition with only 72,000 miles on it. Price is to be determined if interested arises. If someone wishes to buy the engine, pistons and rods, i will give a hefty discount on the combo price
<u>Specs</u>
-81mm Arias pistons
-9:1 compression
-No rings included
-GSR Eagle Rods
<u>Price: $500 shipped within the Lower 48</u>
http://www.boomspeed.com/fnananon/pistonsrods.jpg
http://www.boomspeed.com/fnananon/pistonsrods2.jpg
http://www.boomspeed.com/fnananon/pistonsrods3.jpg
http://www.boomspeed.com/fnananon/pistonsrods4.jpg
http://www.boomspeed.com/fnananon/pistonsrods5.jpg
http://www.boomspeed.com/fnananon/pistonsrods6.jpg
http://www.boomspeed.com/fnananon/pistonsrods7.jpg
http://www.boomspeed.com/fnananon/pistonsrods8.jpg
http://www.boomspeed.com/fnananon/pistonsrods9.jpg
http://www.boomspeed.com/fnana...1.jpg
http://www.boomspeed.com/fnana...2.jpg
http://www.boomspeed.com/fnana...3.jpg
http://www.boomspeed.com/fnana...4.jpg
http://www.boomspeed.com/fnana...5.jpg
I also have a 99 GSR shortblock for sale. It is in need of a new set of bearings in the bottom end since i took it apart for this build and hastily reassembled it in order to clear up some clutter in the garage. The bearings were put in wherever they fit (since we had planned to replace them anyway) and aren't matched to their original rod/journal/pair bearing. The engine has not been run in this condition obviously. For those who are interested, i can get you pictures of the cylinder walls and pistons. It is in great condition with only 72,000 miles on it. Price is to be determined if interested arises. If someone wishes to buy the engine, pistons and rods, i will give a hefty discount on the combo price
Thread
Thread Starter
Forum
Replies
Last Post
Schister66
Classifieds: Forced Induction
16
11-12-2014 03:39 PM
Schister66
For Sale
10
10-18-2014 07:15 AM
Schister66
Classifieds: Forced Induction
10
02-11-2013 07:49 PM
Schister66
Classifieds: Forced Induction
22
12-07-2012 11:09 PM