Assistance Needed: Identifying B-series Aftermarket Cams
#1
Assistance Needed: Identifying B-series Aftermarket Cams
Good Morning,
I have 2 sets of cams, and I'd like to sell one of them, and keep the other. One set are edelbrock cams, and the other, is this unknown cam. If anyone out there has the answer or can shed some light on what they might be, I'd greatly appreciate it. Profile visually are consistent with Toda/JUN but the markings are not.
Thanks
Joel
I have 2 sets of cams, and I'd like to sell one of them, and keep the other. One set are edelbrock cams, and the other, is this unknown cam. If anyone out there has the answer or can shed some light on what they might be, I'd greatly appreciate it. Profile visually are consistent with Toda/JUN but the markings are not.
Thanks
Joel
Last edited by JDM_JNKY; 10-06-2016 at 08:44 AM.
#4
Honda-Tech Member
Re: Assistance Needed: Identifying B-series Aftermarket Cams
How about cam analyze? Because after all, the real specifications are what matter (imo). Not manufacturer and manufacturer's advertising numbers.
I'm sorry that I can not help with
identification.
I'm sorry that I can not help with
identification.
#5
Re: Assistance Needed: Identifying B-series Aftermarket Cams
Did some reading online hoping to increase ID possibility. The following are images that represent the recorded measurements of the unknown cam. If I did this correctly the results should be as follows ( if I'm wrong please correct me ), and the measurements were the same for both intake and exhaust cams:
Primary - 1.45"
Mid - 1.46"
Secondary - 1.45"
Base Circle - 1.17"
Vtec RA/Ratio: 1.55
Non Vtec Lobe RA/Ratio: 1.50
Lobe Lift - Base Circle = Gross Lift
Vtec Lobe G/L = .450 ( 1.55 RA/R )
P/S Lobe G/L = .420 ( 1.50 RA/R )
P/S Lobe G/L = .434 ( 1.55 RA/R )
Primary - 1.45"
Mid - 1.46"
Secondary - 1.45"
Base Circle - 1.17"
Vtec RA/Ratio: 1.55
Non Vtec Lobe RA/Ratio: 1.50
Lobe Lift - Base Circle = Gross Lift
Vtec Lobe G/L = .450 ( 1.55 RA/R )
P/S Lobe G/L = .420 ( 1.50 RA/R )
P/S Lobe G/L = .434 ( 1.55 RA/R )
Trending Topics
#11
Re: Assistance Needed: Identifying B-series Aftermarket Cams
Hmmm... I asked him personally and he had no idea what they where. I found a set floating out here in nor cal stating they were toda b cams..
#12
Re: Assistance Needed: Identifying B-series Aftermarket Cams
i dont think any of those are rocket cams. rocket doesnt use those blanks. i'd be willing to bet money those are toda b cams
Thread
Thread Starter
Forum
Replies
Last Post