94 ls teg

got a b20b swap for my integra what clutch do i use? any help please

St Jimmy

The only difference in b-series clutches is the input shaft on the tranny. Get a clutch to match whatever tranny your running.

94 ls teg

i will be running a ls tranny so any b-series clutch will work

St Jimmy

You need one for the tranny for have, older ls's have smaller input shafts. You need one specific to your tranny

94 ls teg

thanks a lot

nonvtec

I have a LS but I have a JDM GSR LSD tranny on it, so does that mean I need a GSR clutch, I've been running the factory clutch but its in need of replacement and I need a better one for my turbo setup I have to install.

doood

iTrader: (1)

all b series pressure plates are the same. the only difference is in the clutch disk. cable tranny input shafts have a different spline count than hydro's. if you have a hydro tranny get a clutch for any 94+ integra.

nonvtec

thanks, I thought that the hydro b series could use the same clutch, but I didn't want to pay for something that didn't work on mine

doood

iTrader: (1)

make sure you get a flywheel too. b20's use a flex plate for the auto tranny.