Would u run these GSR Cams?
#1
Honda-Tech Member
Thread Starter
Would u run these GSR Cams?
I’m just wondering if this is normal. Look at the bearings, they are wore on one side and not the other. Nothing you cam feel but you can see it for sure. Pic is of the same cam 45* rotation in each pic. LMK, Thanks.
yeah, i know. i'll try to get bigger pics next time.
#3
Man U FTW
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">yeah, i know. i'll try to get bigger pics next time.
</TD></TR></TABLE>
that made me smile because your pics are huge....i dont see much wrong with them....they have wear on them, but it doesn't look like heat discoloration or excessive wear
</TD></TR></TABLE>
that made me smile because your pics are huge....i dont see much wrong with them....they have wear on them, but it doesn't look like heat discoloration or excessive wear
#5
Honda-Tech Member
Thread Starter
Re: (BlueSi2k)
cool! i have around 6 B16 cams sitting around and non had wear like that. i was thinking i got some usless gsr cams. do i need better springs or are the stock B16 going to be fine?
#6
Junior Member
Join Date: Jun 2004
Location: warrensburg, MO, US
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Re: (abnaasefmb)
stock b16 should be fine if ur only gonna rev to stock redline, also cams dont look so bad but just in case it might be a good idea to get them polished. thats what i would do at least. good luck.
Thread
Thread Starter
Forum
Replies
Last Post
NIKE SB'd
Honda / Acura
57
09-02-2004 10:51 PM
AK94GSR
Acura Integra Type-R
7
04-18-2002 12:31 PM