T3 Rebuild Kit
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: The Wild West, Canada
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
T3 Rebuild Kit
Hey guys, I'm running a Garrett "super 60" T3 (.48 exhaust/.60 compressor)on my ZC, and the oil seals are starting to let go. So, rather than feed oil into my engine or spend money on a new unit, I was thinking of getting it rebuilt. According to what I've found on ebay, they just require a general rebuild kit that will work on any T3 or T3/T4 hybrid. Is this a fact? Sometimes ebay sellers are full of ****, and I'm new to rebuilds, so if you guys can help I'd appreciate it. I found this:
http://cgi.ebay.com/ebaymotors...=WDVW
If it'll work just lemme know as well.
http://cgi.ebay.com/ebaymotors...=WDVW
If it'll work just lemme know as well.
#3
Join Date: Apr 2005
Location: santa ana, ca, United states
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 Rebuild Kit (ZCboost)
according to my suppliers site , he sells the kit for $71 plus $40 balance plus labor.
If I only had cridentials I would do it, but hey its part of being a newbie!
If I only had cridentials I would do it, but hey its part of being a newbie!
#4
TSPeed Factory
Join Date: Sep 2002
Location: Renton, WA, Vietnam
Posts: 5,298
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 Rebuild Kit (Bh8teen)
i was going to buy one of those kits. if you look around ebay they also sell the whole center housing with all bearings and seals pre-loaded into it. so basically just slide the shaft through, bolt on the compressor wheel and both housings and you're good to go. although i've never heard any kind of feedback it though.
Thread
Thread Starter
Forum
Replies
Last Post