RC or Precision 1600cc injectors?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: Portland, Oregon, USA
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
RC or Precision 1600cc injectors?
What brand is more reliable? What are your experiences good and bad with Precision and RC injectors?
Regards,
Justin
Regards,
Justin
#2
Junior Member
Join Date: Jan 2003
Location: lone star state
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
If it were up to me I would by the RC's. I mean if your going to run such a large injector you must be looking for some serious power. Not to down play or to say that the Precision injectors are bad or anything its just that RC is known for making some really good injectors. So just spend the extra money (I know there not cheap) and go with RC's, thats what I'm going to run in my next build. My .02 Thanks
#5
Every Precision injector is flow tested before leaving Precision also! I even had a custom set sent to a Header Fabricator on this board, he wanted 3 identical injectors and one that flowed 5% less and they accomodated us
Also I have run 1000cc Precision and 1600cc Precision without any issues
Also from Precision's website
"Precision fuel injectors are flow checked, individually scribed, hand selected and then carefully matched to within 1% of each other for optimum performance in your vehicle. All horsepower ratings are calculated at 90% duty cycle at 43.5 psi upon a BFSC of .50. Compatible with all known aftermarket drivers."
Also I have run 1000cc Precision and 1600cc Precision without any issues
Also from Precision's website
"Precision fuel injectors are flow checked, individually scribed, hand selected and then carefully matched to within 1% of each other for optimum performance in your vehicle. All horsepower ratings are calculated at 90% duty cycle at 43.5 psi upon a BFSC of .50. Compatible with all known aftermarket drivers."
#6
BANNED
Join Date: May 2005
Location: behind my 12 gauge
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boostfed.com)
yeap precision flow tested their inj before shipping them out to customers...im running 1000cc (brand new) and when i recieve them i can still smell the fuel from getting them flow tested....
#7
Re: (turbochargeb18c)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbochargeb18c »</TD></TR><TR><TD CLASS="quote">yeap precision flow tested their inj before shipping them out to customers...im running 1000cc (brand new) and when i recieve them i can still smell the fuel from getting them flow tested....</TD></TR></TABLE>
YEP!
YEP!
Thread
Thread Starter
Forum
Replies
Last Post
ATS*Mark
Forced Induction
22
08-18-2004 09:16 PM