With a nice engine build like the one you listed, i would get something else for the turbo. If i were you, i'd look into either a 57 trim, SC34 or GT3255e. Also, your injectors are too small for your goals. A set of 550s might get you there, but i'd opt for a set of 720cc injectors
oh the other question i have is that when i spoke to the guy wo sold me the pistons ,he told me the if i ran the head gasket that i have (cometic .072 )would put me to 8:9:1 cr. but i think that's using the stock with .030 .
does anybody know with a .072 what cr it would put me on????
thanks in advance..
__________________ 96 civic Ek hb -ITR_[B]B18c5__ 10 lbs[B]
NEW built in progress.....
If you search "Honda compression calculator" on Google, you can find a few really good ones that will let you input the headgasket thickness along with your piston, head and block combo to determine your static compression
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.