my integra build
03-29-2011, 04:48 PM
#52
Honda-Tech Member
Re: my integra build
This weekend put some finishing touches on the teg. I finished all the body work just need to primer the panels, I also got my radius arms finished. I had to re-clock my turbo because of the bar so did that too. Once it gets warm out I will take some full pics and more detailed hard to do so in a small garage.
03-30-2011, 06:31 AM
#54
Honda-Tech Member
Thread Starter
Re: my integra build
I actually got all the parts from summit. pretty cheap too! I bought the tubing there it doesn't come gnarled or anything but the tubing, rod ends, and weld in bungs all from summit. I can give give you all the part numbers and quantities of everything if you want.
03-30-2011, 06:46 AM
#55
Honda-Tech Member
Re: my integra build
I actually got all the parts from summit. pretty cheap too! I bought the tubing there it doesn't come gnarled or anything but the tubing, rod ends, and weld in bungs all from summit. I can give give you all the part numbers and quantities of everything if you want.
03-30-2011, 10:37 AM
#56
Honda-Tech Member
Thread Starter
Re: my integra build
Haha, yeah man believe it or not they have a lot of **** that we use on our cars. I got cheaper rod ends but you can get cheap ones or expensive ones up to you. I have around 100 or so dollars in my whole set up which isn't to bad.
04-06-2011, 09:39 PM
#57
Honda-Tech Member
Thread Starter
Re: my integra build
Alright guys, I'm finally getting close to paint!! 
I got all the scratches dings etc. all worked out just need to do one final coat of sealer primer, a front lip, and were ready to go. Here are some pics........
I got all the scratches dings etc. all worked out just need to do one final coat of sealer primer, a front lip, and were ready to go. Here are some pics........
04-13-2011, 08:08 PM
#61
Honda-Tech Member
Thread Starter
Re: my integra build
Got a question, been reading up a little on how to prep for Milano Red, and I have read that you should put a red primer sealer before your base-coat and also read that a light gray like how it is now is better. I'm gonna be primering this weekend all at once not panel by panel so any help will be awesome.
04-17-2011, 08:56 PM
#62
Honda-Tech Member
Thread Starter
Re: my integra build
Alright, this weekend me and the old man spent sometime getting all the little imperfections I missed. We sprayed it with a 2 part sealer and next weekend, she is getting sprayed milano red. 4 coats of base and 4 of clear! Here is how she sits now.
04-26-2011, 12:01 AM
#66
Honda-Tech Member
Re: my integra build
Reminds me of my teg build from waaay back in the day lol. Same manifold, HX35, LS with some ARP's lol. went low 12's at 9-10psi on street tires.
04-26-2011, 09:43 AM
#69
Honda-Tech Member
05-25-2011, 05:57 PM
#72
Honda-Tech Member
Thread Starter
Re: my integra build
sorry I've been busy working for the last couple weeks and took a vacation to carlisle for the car show! but finished wet sandind gonna respray 2 coats of clear this saturday finished ordering all my parts, paint and stripped my wheels and mounted some bf goodrich tires.
07-16-2011, 12:28 PM
#75
Honda-Tech Member
Thread Starter
Re: my integra build
Hey guys sorry I have been really busy with work and working on everyone elses car but got her on the road a couple weeks ago took some pictures with my buddy hope you like them! Was supposed to get a tune this tuesday for 400 but some bitch decide to rear end me going 40mph so... 