More E85 tuning... 914whp @ 20psi
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Colorado Springs, CO, USA
Posts: 1,822
Likes: 0
Received 1 Like
on
1 Post
More E85 tuning... 914whp @ 20psi
Pretty cool setup I got to tune last week on e85.
If you haven't figured it out by now, its not a honda Figured the FI forum might still get a kick out of it though
383 (up from a 351)
Built powerglide
Twin T4/T67 turbos
FAST (pre XFI)
8x160lb (~1800cc) injectors
20psi, pump gas (e85)
Snow Performance meth injection kit
Here is a video someone else put together after the tune was done.... he used the overinflated altitude corrected numbers in the video though, the posted chart is the dyno dynamics actual uncorrected numbers. Check out the tires.
http://premium1.uploadit.org/s...g.wmv
There is one final race this weekend before the long winter race-drought here in CO. After this weekend we'll turn up the boost and see what it really has. He figured that this was enough power for now... first the owner needs to get the front wheels to land on the ground while still facing the finish line before the boost goes up It will definitely be well over 1000rwhp uncorrected with a little more boost. Not bad for $2.00 per gallon
If you haven't figured it out by now, its not a honda Figured the FI forum might still get a kick out of it though
383 (up from a 351)
Built powerglide
Twin T4/T67 turbos
FAST (pre XFI)
8x160lb (~1800cc) injectors
20psi, pump gas (e85)
Snow Performance meth injection kit
Here is a video someone else put together after the tune was done.... he used the overinflated altitude corrected numbers in the video though, the posted chart is the dyno dynamics actual uncorrected numbers. Check out the tires.
http://premium1.uploadit.org/s...g.wmv
There is one final race this weekend before the long winter race-drought here in CO. After this weekend we'll turn up the boost and see what it really has. He figured that this was enough power for now... first the owner needs to get the front wheels to land on the ground while still facing the finish line before the boost goes up It will definitely be well over 1000rwhp uncorrected with a little more boost. Not bad for $2.00 per gallon
#3
Junior Member
Join Date: Nov 2005
Location: office view of GA400
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
just watched the vid.....
WOW!!!!
does that vehicle have too much power for that dyno? on the one part of the clip when it said, "Pushing the Dyno"...umm, that's not supposed to happen, is it? it looks like any more power and that thing is comin right off.
WOW!!!!
does that vehicle have too much power for that dyno? on the one part of the clip when it said, "Pushing the Dyno"...umm, that's not supposed to happen, is it? it looks like any more power and that thing is comin right off.
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Colorado Springs, CO, USA
Posts: 1,822
Likes: 0
Received 1 Like
on
1 Post
This unit has the twin retarder option, so it can handle 2800whp. Its the AWD unit so it has an adjustable wheelbase which is what you saw move. There is another strapping mechanism we will use to strap more power than this. We didn't need any weight or strange strapping at all... the traction on the dyno is there
#6
Honda-Tech Member
Join Date: Jan 2005
Location: Lower Right Hand Corner, PA
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: (igo4bmx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by igo4bmx »</TD></TR><TR><TD CLASS="quote">damn it i wish they sold that stuff around philly </TD></TR></TABLE>
Amen.
Amen.
Trending Topics
#12
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Arturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">I think we are all excited once E85 is every where!
E85 FTW!</TD></TR></TABLE>
Yup
Well done Servion
E85 FTW!</TD></TR></TABLE>
Yup
Well done Servion
#13
Member
Join Date: May 2004
Location: Nashville, TN, U.S.A
Posts: 2,992
Likes: 0
Received 0 Likes
on
0 Posts
Re: (0x64)
damn nice!
I was wondering since I have some E85 a block from me is the burn rate different? I know about the stoich being different, but is my timing going to change significantly? I wouldn't mind trying some if I don't have to hit up a dyno.
I was wondering since I have some E85 a block from me is the burn rate different? I know about the stoich being different, but is my timing going to change significantly? I wouldn't mind trying some if I don't have to hit up a dyno.
#14
Honda-Tech Member
Join Date: Jun 2003
Location: Mesa, Az, USA
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Re: More E85 tuning... 914whp @ 20psi (servion)
nice once i get this trans/clutch fixed ill get your ticket..nice work..bring us some E85..george says its nice
#17
Honda-Tech Member
Join Date: Jun 2003
Location: Mesa, Az, USA
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Re: More E85 tuning... 914whp @ 20psi (GA-AutoFab)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GA-AutoFab »</TD></TR><TR><TD CLASS="quote">lol yeah they'll let him bring fuel on the plane.</TD></TR></TABLE> im sure he can
#18
Re: More E85 tuning... 914whp @ 20psi (Redwidow)
Nice. Some friends of mine pulled off similar numbers on 20 psi a few weeks ago.
http://www.rune85.com/turbocobra
http://www.rune85.com/turbocobra
#19
Honda-Tech Member
Join Date: Sep 2003
Location: miami, fla, us
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
looks good...im suprised it didnt spin
whats the correction at? the thing about those dynos is you can make them say whatever numbers you want...some people take advantage of that and the car wont trap a speed thats consistent with the numbers
whats the correction at? the thing about those dynos is you can make them say whatever numbers you want...some people take advantage of that and the car wont trap a speed thats consistent with the numbers
#22
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Colorado Springs, CO, USA
Posts: 1,822
Likes: 0
Received 1 Like
on
1 Post
Re: (D@nnY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D@nnY »</TD></TR><TR><TD CLASS="quote">looks good...im suprised it didnt spin
whats the correction at? the thing about those dynos is you can make them say whatever numbers you want...some people take advantage of that and the car wont trap a speed thats consistent with the numbers</TD></TR></TABLE>
The graph is uncorrected. The video is the dyno's calculated CF. There are a handful of videos floating around the net of cars making double this power without spinning on a dyno dynamics I will have some track time hopefully this weekend.... as long as he can stay in it all the way down the 1/4 we'll get some good numbers
whats the correction at? the thing about those dynos is you can make them say whatever numbers you want...some people take advantage of that and the car wont trap a speed thats consistent with the numbers</TD></TR></TABLE>
The graph is uncorrected. The video is the dyno's calculated CF. There are a handful of videos floating around the net of cars making double this power without spinning on a dyno dynamics I will have some track time hopefully this weekend.... as long as he can stay in it all the way down the 1/4 we'll get some good numbers
#25
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Colorado Springs, CO, USA
Posts: 1,822
Likes: 0
Received 1 Like
on
1 Post
Re: (Hybrid93Eg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hybrid93Eg »</TD></TR><TR><TD CLASS="quote">Whats a powerglide doing behind a Ford engine?</TD></TR></TABLE>
haha I wondered if anyone would catch that He has an adapter plate. Pretty cool setup
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">
How is the idle with the 160 lb/hr injectors?
Justin
</TD></TR></TABLE>
Actually its surprisingly good especially considering he has no IAC. Just a little setup of the FAST's timing versus idle error and the trottle stop and it idles nicely. Well, as nice as a big cammed v8 with open downpipes could be expectd to idle
haha I wondered if anyone would catch that He has an adapter plate. Pretty cool setup
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">
How is the idle with the 160 lb/hr injectors?
Justin
</TD></TR></TABLE>
Actually its surprisingly good especially considering he has no IAC. Just a little setup of the FAST's timing versus idle error and the trottle stop and it idles nicely. Well, as nice as a big cammed v8 with open downpipes could be expectd to idle