Parting Out Turbo Setup and Turbo Motor
11-21-2006, 10:07 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Parting Out Turbo Setup and Turbo Motor
Buyer pays shipping unless otherwise noted. Some prices negotiable.
Turbo Setup
TurboSmart 38mm Ultra-Gate Wastegate - $175
Custom Aluminum Intercooler Piping; Greddy Flange - $175
May have more stuff to list... will add later
Modified by M.A.R.C. at 5:42 PM 1/7/2007
Turbo Setup
TurboSmart 38mm Ultra-Gate Wastegate - $175
Custom Aluminum Intercooler Piping; Greddy Flange - $175
May have more stuff to list... will add later
Modified by M.A.R.C. at 5:42 PM 1/7/2007
Trending Topics
12-02-2006, 04:53 PM
#10
Honda-Tech Member
Thread Starter
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting Out Turbo Setup and Turbo Motor (boostedek9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedek9 »</TD></TR><TR><TD CLASS="quote">how much for just the clutch and how many miles does it have on it?</TD></TR></TABLE>
250 for clutch. it has maybe 3k miles on it or less.
250 for clutch. it has maybe 3k miles on it or less.
12-02-2006, 06:26 PM
#12
Honda-Tech Member
Thread Starter
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boostedek9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedek9 »</TD></TR><TR><TD CLASS="quote">and what stage pressure plate is that?</TD></TR></TABLE>
i dunno bout stage... act doesn't go by stages. it's an Xtreme pressure plate though. the setup is good for something like 408tq as rated on act's site. it held up to the 358wtq my civic put down without a hitch.
i dunno bout stage... act doesn't go by stages. it's an Xtreme pressure plate though. the setup is good for something like 408tq as rated on act's site. it held up to the 358wtq my civic put down without a hitch.
12-11-2006, 05:58 PM
#16
Honda-Tech Member
Thread Starter
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mad Cow)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mad Cow »</TD></TR><TR><TD CLASS="quote">What chassis is the piping for? Got any pics?</TD></TR></TABLE>
it was in a 96-00 civic w/ a gsr motor that had a skunk2 intake and then a jg victorx. i'm sure it'll fit 92-95's as well or tegs with slight modification.
only pix are in the car:
it was in a 96-00 civic w/ a gsr motor that had a skunk2 intake and then a jg victorx. i'm sure it'll fit 92-95's as well or tegs with slight modification.
only pix are in the car:
12-12-2006, 02:33 PM
#20
Honda-Tech Member
Thread Starter
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting Out Turbo Setup and Turbo Motor (frankenstienEk)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by frankenstienEk »</TD></TR><TR><TD CLASS="quote">50 for the solenoid</TD></TR></TABLE>
i dont' have it. it was sold with the head.
i dont' have it. it was sold with the head.
