HUGE BUILT D16 TURBO PART OUT!!!!!#*&(^(#@*&
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Florida
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
HUGE BUILT D16 TURBO PART OUT!!!!!#*&(^(#@*&
pictures are here http://www.hondamarketplace.com/show...8#post41351668
I will have pictures up tomorrow, I am a college student in Gainesville Florida and these are hard times. Although my car has been my life for the past 3 years school is more important and I need to pay for school and rent etc. I will get back in the game after I get my degree.
ok here it goes(deep breath)
Turbo set up:
Holset hy35 - SOLD
D16 Ramhorn manifold just put on a month ago, local shop welded it - $300
Intercooler 27x22x3 (ask for actual dimensions) - $100 (room mate is trying to decide whether he wants it or not)
civic intercooler piping with good couplers, bead rolled and t-bolt clamps 2" cold side 2.5" hot side - Sold
Pfabrications log manifold - $150
Intercooler 20x2.5x12 (ask for actual dimensions) - SOLD
TIAL 38mm Waste gate with 7.5lb spring - SOLD
latest model of REAL HKS SSQV BOV - SOLD
Hondata 4 Bar Map sensor - SOLD
3in all the way back just welded mandrel bent exhaust for EK Hatch - $300
660cc peak impendance TunerToyz injectors - SOLD
2.5 bar Motorola Map Sensor - $25
ENGINE PARTS:
Y8 Intake manifold - $40 (comes with Y7 throttle body, stock fuel rail and misc stock
sensors)
Built D16z6 head (3angle valve job, port and polish, 59300 camshaft, Supertech Titanium
valve springs and retainers, Skunk 2 Valves, older jdm adjustable cam gear(38 teeth) assembled approximately 5k miles ago) - $800 Pending (I have over 2k in it)
block is a d16zc (Eagle Rods, Vitara Pistons (75.5), all ACL bearings, YCP rings. Piston to wall clearance is .0045 compression was 110 across all four pistons, notched block and girdle) - $600 Pending with Several people (over a thousand in it)
d16z6 transmission with OBX LSD (paid $450 for it)- $500 (3rd gear grinds)
ACT 6 puck clutch for d16 rated at 350ft lbs - $300 (paid $450 for it)
d16z6 oil pan with return line oil fitting TIG welded on - $50
TRADES I AM LOOKING FOR:
wheels, stock SOHC swap for ek hatch (no obd0 crap), someone who can paint, light bulb clips for 96-98 EK lights, DSLR camera
Some prices are adjustable and I may move some up or down depending on how much others are selling used parts for. I shall have pics up tomorrow, I didnt have time to start taking the car apart today I just drained the fluids and tomorrow the car will begine to be parted out. I will hopefully get some pics up tomorrow
if you low ball me you will be ignored
Local pick up is a plus!!!!!!!
I am Paypal certified: civiccx1998@yahoo.com
I have 50+ feed backs, I believe, on EBAY under the name "civicsurfer69" some parts may even go up on there.
I am just another college student in need of help financially and dont feel like doing this but I have to go to school.
Thank you for looking
-Eric
I will have pictures up tomorrow, I am a college student in Gainesville Florida and these are hard times. Although my car has been my life for the past 3 years school is more important and I need to pay for school and rent etc. I will get back in the game after I get my degree.
ok here it goes(deep breath)
Turbo set up:
Holset hy35 - SOLD
D16 Ramhorn manifold just put on a month ago, local shop welded it - $300
Intercooler 27x22x3 (ask for actual dimensions) - $100 (room mate is trying to decide whether he wants it or not)
civic intercooler piping with good couplers, bead rolled and t-bolt clamps 2" cold side 2.5" hot side - Sold
Pfabrications log manifold - $150
Intercooler 20x2.5x12 (ask for actual dimensions) - SOLD
TIAL 38mm Waste gate with 7.5lb spring - SOLD
latest model of REAL HKS SSQV BOV - SOLD
Hondata 4 Bar Map sensor - SOLD
3in all the way back just welded mandrel bent exhaust for EK Hatch - $300
660cc peak impendance TunerToyz injectors - SOLD
2.5 bar Motorola Map Sensor - $25
ENGINE PARTS:
Y8 Intake manifold - $40 (comes with Y7 throttle body, stock fuel rail and misc stock
sensors)
Built D16z6 head (3angle valve job, port and polish, 59300 camshaft, Supertech Titanium
valve springs and retainers, Skunk 2 Valves, older jdm adjustable cam gear(38 teeth) assembled approximately 5k miles ago) - $800 Pending (I have over 2k in it)
block is a d16zc (Eagle Rods, Vitara Pistons (75.5), all ACL bearings, YCP rings. Piston to wall clearance is .0045 compression was 110 across all four pistons, notched block and girdle) - $600 Pending with Several people (over a thousand in it)
d16z6 transmission with OBX LSD (paid $450 for it)- $500 (3rd gear grinds)
ACT 6 puck clutch for d16 rated at 350ft lbs - $300 (paid $450 for it)
d16z6 oil pan with return line oil fitting TIG welded on - $50
TRADES I AM LOOKING FOR:
wheels, stock SOHC swap for ek hatch (no obd0 crap), someone who can paint, light bulb clips for 96-98 EK lights, DSLR camera
Some prices are adjustable and I may move some up or down depending on how much others are selling used parts for. I shall have pics up tomorrow, I didnt have time to start taking the car apart today I just drained the fluids and tomorrow the car will begine to be parted out. I will hopefully get some pics up tomorrow
if you low ball me you will be ignored
Local pick up is a plus!!!!!!!
I am Paypal certified: civiccx1998@yahoo.com
I have 50+ feed backs, I believe, on EBAY under the name "civicsurfer69" some parts may even go up on there.
I am just another college student in need of help financially and dont feel like doing this but I have to go to school.
Thank you for looking
-Eric
Last edited by big-cat; 02-08-2010 at 02:27 PM.
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Florida
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Re: HUGE BUILT D16 TURBO PART OUT!!!!!#*&(^(#@*&
yes I know you have my word they are going up tomorrow. PM me if you are interested in something and are curious on prices.
Thanks
Thanks
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Florida
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Re: HUGE BUILT D16 TURBO PART OUT!!!!!#*&(^(#@*&
alright sorry for the delay guys only had an hour to work on the car today due to school
I managed to get the head off and the turbo kit off. tomorrow I have 3 classes so not going to be able to work on car. I will clean some things up tonight and have pictures up later tonight.
Thanks Eric
if you are interested in anything please PM me! I think my 2 room mates have dibs on the wastegate and intercooler but still take pictures of them when I clean both of them
we were thinking I was making low to mid 300's on 20psi with little things holding me back such as stock fuel rail, IM, throttle body, fuel pressure regulator, little stupid ****.
I managed to get the head off and the turbo kit off. tomorrow I have 3 classes so not going to be able to work on car. I will clean some things up tonight and have pictures up later tonight.
Thanks Eric
if you are interested in anything please PM me! I think my 2 room mates have dibs on the wastegate and intercooler but still take pictures of them when I clean both of them
we were thinking I was making low to mid 300's on 20psi with little things holding me back such as stock fuel rail, IM, throttle body, fuel pressure regulator, little stupid ****.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Florida
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Re: HUGE BUILT D16 TURBO PART OUT!!!!!#*&(^(#@*&
here are pictures http://www.hondamarketplace.com/show...8#post41351668
#12
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Florida
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Re: HUGE BUILT D16 TURBO PART OUT!!!!!#*&(^(#@*&
P.S. everyone who buys my parts better make power with them. I want to be like...yea, that was my old part.
BumP!
BumP!
#18
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Florida
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Re: HUGE BUILT D16 TURBO PART OUT!!!!!#*&(^(#@*&
BUMP it, thought people wanted to make power and show up everyone with my turbo parts and my ridiculously built d16. You guys could kill bitches with all these parts and they are so new and cheap