FS: CTR(b16b) longblock!!!! Omg rare!!
03-30-2011, 01:24 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: 321, FLA, usa
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
FS: CTR(b16b) longblock!!!! Omg rare!!
I am selling a CTR(B16b) *long block (DISASSEMBLED!!!). The reason I am getting rid of this is because I decided to go a different route with my project. I bought it 2 years back and haven’t had the money to get it in my car. When I got the motor I rebuilt it, then recently tore it down to replace the bearings I originally bought, with OEM bearings. But just haven’t had the time or money to get this motor going. Now, onto the details…
*
Machine work: (Done by Brevard Cylinder Head)
-block and head were hot tanked and cleaned
-block was honed and checked for square
-block has been lined honed
*
-head has all new valve guides and seals
-head was checked for square
-neither head nor block were decked
*
-Crank, rods, and pistons were all weighed and balanced to 10,000 rpms
-All new OEM piston rings
-Complete OEM engine gasket set
-Brand new, never been used, OEM CTR/ITR valve cover
-ARP head/main studs
-OEM head gasket and timing belt
*
*
The only thing this long block does not some with is bearings, valve cover gasket set, and 1 bolt that screws into the head to hold the valve cover on, alternator. *
*
Im sure there are a few specs I am missing but feel free to contact me and ask any questions or even come check it out, 321-482-6307 (Scott) *
*
PRICE: $2000 firm!!!!!!
Here are some picture of it together.
*
Here are some of it disassembled.
*
*
*
Here are some pictures i took today, 4-3-2011
*
Machine work: (Done by Brevard Cylinder Head)
-block and head were hot tanked and cleaned
-block was honed and checked for square
-block has been lined honed
*
-head has all new valve guides and seals
-head was checked for square
-neither head nor block were decked
*
-Crank, rods, and pistons were all weighed and balanced to 10,000 rpms
-All new OEM piston rings
-Complete OEM engine gasket set
-Brand new, never been used, OEM CTR/ITR valve cover
-ARP head/main studs
-OEM head gasket and timing belt
*
*
The only thing this long block does not some with is bearings, valve cover gasket set, and 1 bolt that screws into the head to hold the valve cover on, alternator. *
*
Im sure there are a few specs I am missing but feel free to contact me and ask any questions or even come check it out, 321-482-6307 (Scott) *
*
PRICE: $2000 firm!!!!!!
Here are some picture of it together.
*
Here are some of it disassembled.
*
*
*
Here are some pictures i took today, 4-3-2011
Last edited by xshytlipsx; 05-09-2011 at 12:55 PM. Reason: price drop!
Trending Topics
04-02-2011, 08:46 PM
#16
Honda-Tech Member
Join Date: Dec 2007
Location: Central, Florida, United States
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: CTR(b16b) longblock!!!! Omg rare!!
I oversaw the making of this beast, and i can vouch for its worthiness, weather or not i agree with you selling it!!!
05-09-2011, 01:24 PM
#25
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: 321, FLA, usa
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: CTR(b16b) longblock!!!! Omg rare!!
Dont want to sell this, but at this point in my life, its just collecting dust. Price drop! $2000 FIRM!