no rev limiter? (head scratcher)
#1
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
no rev limiter? (head scratcher)
im on crome 1.5.3 tuning with a moates ostrich2 and i have the rev limiter set to 9,000, but its not registering that its on there.
i unplugged the emulator, restarted crome, then hit "read" to see if it saved. it shows the right rev limit, but it has no rev limit still. could this be a bad ribbon cable from the ostrich to the ecu?
i unplugged the emulator, restarted crome, then hit "read" to see if it saved. it shows the right rev limit, but it has no rev limit still. could this be a bad ribbon cable from the ostrich to the ecu?
#2
Honda-Tech Member
Re: no rev limiter? (head scratcher)
The ECU wouldn't run normally if it couldn't read from the Ostrich. It'd be in limp mode. Are you really revving past 9?
#4
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Re: no rev limiter? (head scratcher)
ad it at 8500 and it used to hit rev limit .but that was on a burned chip, and I got rid of the chip when i threw the ostrich on. I'm revvin to 9, and it shows 9 on the cluster, but there's no rev limiter.
#6
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Re: no rev limiter? (head scratcher)
i did. it shows a value like 9028 for the rev limit. but it still does not work?
maybe its the wiring to the ecu? but which wire could cause this from not having proper connection?
maybe its the wiring to the ecu? but which wire could cause this from not having proper connection?
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
#9
Re: no rev limiter? (head scratcher)
im on crome 1.5.3 tuning with a moates ostrich2 and i have the rev limiter set to 9,000, but its not registering that its on there.
i unplugged the emulator, restarted crome, then hit "read" to see if it saved. it shows the right rev limit, but it has no rev limit still. could this be a bad ribbon cable from the ostrich to the ecu?
i unplugged the emulator, restarted crome, then hit "read" to see if it saved. it shows the right rev limit, but it has no rev limit still. could this be a bad ribbon cable from the ostrich to the ecu?
I also noticed that this happens when i add extra features like Launch an shiftlight.
Thread
Thread Starter
Forum
Replies
Last Post