Toe_fur

So I wanna do 2 step on my automatic 95 integra.
I don't really know much about the ecu or chipping it.
Basically, what do I have to get to have 2 step on my car?
It's a stock LS b18b1 motor.
I know there's not really a point for it on an automatic car. But yea.
Any info would be very much appreciated.

torkh22a

why do you want a 2 step?

JuggerNaut-CTR

lol

How do you expect "2step" to work on a clutchless car?

You may want to look into a stall converter

Aradin

It's not going to do anything on an automatic car. But if you really want it, you can get your P75 ecu chipped and have a map put on there that has 2 step on it. Just make sure whoever chips it leaves the automatic stuff in place...And chances are you're not going to get it tuned so make sure you get a decent basemap or the car will run terrible and/or blow up if the fuel/timing parameters are way off.

Since it's stock...personally I'd just leave it alone. You're not going to gain anything but some inconvenience.

accorse07

lol
...sorry Auto to manual conversion!

awdgsx96

Yeah bud someone can burn a stock MAP on it without a problem, if this scenario even made sense.

Why do you want a 2step anyway? It won't do anything. Put in neutral bring to desired RPM, and feather your throttle to sound cool, then drop in D4. It'll win every race.

scmil95eg

psshhh. Just install a 3-speed power-glide with a 4500 stall, do a quick RWD conversion, line lock, and you're all set. You'll have the most ballin teggy on the block!