Yep, the little A6 that could... hit 10s!
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Posts: 2,946
Likes: 0
Received 0 Likes
on
0 Posts
Yep, the little A6 that could... hit 10s!
Broke into the 10s last night, with a crappy 2-3 shift to boot.
its been a long process, but i want to say thank you to everyone here that helped with suggestions, especially with getting my 60's down.
consistent 1.6's now.
the car ran 11.3 @ 120 on 94 pump @ 22psi, put in 2 Gal of C16, upped the boost to 29psi, ramped up the timing 4-5 degrees.... 10.9 @ 127
http://www.youtube.com/watch?v=A7RZ78vFR2c
outside view
http://www.youtube.com/watch?v=L48zNGJU__c
its been a long process, but i want to say thank you to everyone here that helped with suggestions, especially with getting my 60's down.
consistent 1.6's now.
the car ran 11.3 @ 120 on 94 pump @ 22psi, put in 2 Gal of C16, upped the boost to 29psi, ramped up the timing 4-5 degrees.... 10.9 @ 127
http://www.youtube.com/watch?v=A7RZ78vFR2c
outside view
http://www.youtube.com/watch?v=L48zNGJU__c
Last edited by welfarepc; 10-17-2009 at 11:23 PM.
Trending Topics
#10
Honda-Tech Member
Join Date: Jun 2006
Location: Macon, Ga
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Re: Yep, the little A6 that could... hit 10s!
Just looked at your timeslip again. Looks like you were crossing the beams when the other driver was at the 1/8th, lol!
#13
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Posts: 2,946
Likes: 0
Received 0 Likes
on
0 Posts
Re: Yep, the little A6 that could... hit 10s!
i agree the 60 could be better.
man i just wish there were more friday night street legals left... i want another crack at it so bad!!
time to save up for next year, bigger and better!
edit: turbo is a HE351CW off an 05 cummins.
man i just wish there were more friday night street legals left... i want another crack at it so bad!!
time to save up for next year, bigger and better!
edit: turbo is a HE351CW off an 05 cummins.
Last edited by welfarepc; 10-10-2009 at 06:02 PM.
#15
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Posts: 2,946
Likes: 0
Received 0 Likes
on
0 Posts
#17
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Posts: 2,946
Likes: 0
Received 0 Likes
on
0 Posts
#19
Honda-Tech Member
Join Date: Dec 2004
Location: Bronx, NY
Posts: 1,352
Likes: 0
Received 0 Likes
on
0 Posts
Re: Yep, the little A6 that could... hit 10s!
Good work man.
Get that 60' down a bit lower and you'll go 10.7's as it sits.
Love seeing more basic D's gettin in the 10's.
Welcome.
Get that 60' down a bit lower and you'll go 10.7's as it sits.
Love seeing more basic D's gettin in the 10's.
Welcome.
#24
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Posts: 2,946
Likes: 0
Received 0 Likes
on
0 Posts
Re: Yep, the little A6 that could... hit 10s!
oh, and thanks... it feels nice to be here.
here are a few.
i fabbed everything on this car, from the traction bar to the turbo manifold, from the down pipe and exhaust to the catch can. assembled the motor myself, etc etc. its been a good learning experience.
was still using an MSD coil at this point... using only a dizzy now. but this is a good overall shot of the setup.
the 4 inch down pipe was a PITA to fit. lol
one last pic... yeah, i built this thing on gravel and dirt, and assembled the motor in my back yard... lol
Last edited by welfarepc; 10-11-2009 at 01:13 PM.