0554

Thanks its been a process thats for sure. its actually hopefully going to be on the dyno in the next couple weeks. pretty basic 84mm gsr with endyn head and 4294r

Boosted_Coupe

Is the the aftermarket Endyn head? If so, let us know how it holds up, i'm thinking about getting one.

0554

No its a factory honda head with their portwork. It came off jason Penman's old civic that went like 9.60's or whatever i think.

jdm kidd

im hoping for 10's this year

s366
sleeved gsr
jg head
custom topmount
bbk intake mani
cc twin disc

jdmdc529

Going for 10's april 4th NSCRA.

tuhboek

Midori EK Hatch
B18 Golden Eagle Sleeves/Rods CP Pistons 9:1
Head port polished by Portflow
Tilton twin disk stock trans for now
1000cc injectors w/resistor box
SC61 Turbo
Hondata s300
24.5x8 slicks

TimKennard

hoping for 10's, expecting low 11's.

b16 81.5mm
60 trim .63 turbo
rc750 inj
car weighs 2060 with me in it.
going to dyno soon, hopefully 350-400 hp

Blown90hatcH

I am shooting to get out of the 10s this year. Last year I was haunted with consistant 10.1X. Good luck fellas.

sp00led

I'm still looking for a 10sec pass.... Should of had one by now but for whatever reason it hasn't happened yet. Best is 11.2 @ 129 (2775lbs with driver).

Car makes the power in my sig but for whatever reason it isn't even trapping 130s. Still trying to figure that one out....

gtistile

/\i just figured it out... 2775 pounds...

integranator

iTrader: (2)

Ugh, hopefully I can get all the bugs sorted out and break into it this year. Lighter chassis, tons more power. First pass out last year, on 420ish went 12.0@125 w/ a ****ed trans. So, now i'm at the 550 to 575 range-- should be mid 130's. We shall see!

Dr. D-Series

Made it into the 10's this year.

10.54@132.8.

Vitara/Eagle/Holset/D16Z6 setup in a 90 Hatch, roughly 1950-2000lbs w me in it

Hot.

OUTLAWZZRACING.NET

i am going for high tens by the shoot out with a k24/k20 combo!!!
simple stock set-up

1badda

I wanna Break Into the 10's Hopefully Honda Day !!!!!!!!!

s2kfromhell

aiming for 10's this year as well.

BoostR41

my question is how deep into 10's can I go.

92 hatch
T3/60-1 ball bearing
about 2200lbs
24.5x8x13 slicks

did 556whp on 25psi and terrible tune should do about 575whp or so on a good tune, just hoping I dont run out of fuel

I also would like to see if I can crack 10s on the 235/60/15 M&H DOT's I have too

Mr. Em1

iTrader: (1)

good stuff, better jack up the front for those tires!!!

DSRxCandyh2bEG

iTrader: (4)

Im just looking to see who is shooting for 10's this year(2009)
Post Your
-92 civic vx HB
-276hp & 186tq
-b16 (custom gearing this year)
-2005lbs last year. (new ssr cage for 2009)
-H22,
88mm CP pistons 12.5:1 comp
IB spec ultra light rods (h22 rod)
95mm h23 crank
Blox B cams (going over to Pro series)
P&P from Blacktrax Performance
-All motor
-Street car for the Strip
-Hondata s200/ Saturated RC 370cc
- Bogart Pro 4's with M&H rubber
Front: 24.5x8x13
Rear: 24.5x3.6x22

Current best was 11.81@114mph with a bad fuel pump but this season I will be dipping low 11's and hopefully high 10's. Depends on new HP #'s...

boost_aholic97

Well Fellas i finally hit the 10's this past weekend!
we went 10.71@130.96 with a 1.6 60'
sleeved B16 bottom end 9.5:1 cp pistons
built gs-r head
T04-R
SnailHouse Projects Manifold
SpeedFactory Tuned
Open Diff, street Clutch, Stock Axles and Ignition

we still have more left in it, but there is always next weekend!

Mr. Em1

iTrader: (1)

damn man just makin it into the tens, upgrade the clutch, axles and close that diff n you will be pickin up alot of time there. good driving

captamericao9

I'm just shooting for mine to run this year before I get deployed. But should run 10's ill be happy.

98 CX hatch
84mm Gsr
GT35r
Full-Race Mani
1000c rc injectors
dual 255 walboro

boost_aholic97

thanks for the kind words man! i can't wait for these parts to get in and the long nights working on the thing, and especially the arguments with the wifey about the car! lol