TWIN DISC what Clutch Master Cylinder
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: Miami
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
TWIN DISC what Clutch Master Cylinder
I have a twin disc setup on all motor car, just noticed my MC is leaking a little bit..
What Clutch Master Cylinder are most of you guys using?
I'm using the Tilton Twin Disc btw..
Thank You
Anybody used a tilton MC with the normal clutch slave cylinder??
What Clutch Master Cylinder are most of you guys using?
I'm using the Tilton Twin Disc btw..
Thank You
Anybody used a tilton MC with the normal clutch slave cylinder??
Trending Topics
#9
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: TWIN DISC what Clutch Master Cylinder
If you're using the OEM style slave cylinder and throw out bearing then you can use any OEM 5/8" master cylinder...S2000, stock.
You can also use the 20-21mm Omnipower but the pedal travel is reduced considerably. I'm not sure how anybody drives with them.
If you use the Tilton hydraulic TOB, then use the tilton or preferably the wilwood 3/4" master with integrated reservoir. You'll also need an adapter plate from TPR, T1 or wherever and a Clevis and pin.
You can also use the 20-21mm Omnipower but the pedal travel is reduced considerably. I'm not sure how anybody drives with them.
If you use the Tilton hydraulic TOB, then use the tilton or preferably the wilwood 3/4" master with integrated reservoir. You'll also need an adapter plate from TPR, T1 or wherever and a Clevis and pin.
Thread
Thread Starter
Forum
Replies
Last Post
Kidnkorner
Honda Civic / Del Sol (1992 - 2000)
17
10-16-2012 05:46 AM