True Street Build NorCal
#1
Honda-Tech Member
Thread Starter
True Street Build NorCal
Alright, I've been on this forum for quite sometimes now. Mostly just lurking around and learning a lot from here but about a few years ago i started building my civic. Was a daily driver for a while until i got tired of getting pulled over, so i turned it into a track car!
Heres the Build. Enjoy!
Motor-
b18c1 golden eagle sleeves
Wiseco 9.0 pistons 82 mm bore
Eagle big bolt rods
Gsr crank
Oem Oil Pump
Oem water pump
Head-
Gsr head
Supertech valvetrain-valves,springs,retainers
Pro 1s
Port polished
Edelbrok Victor x manifold w/ blox 74mm tb
B&R Oil catch kit
Fuel-
Dual 044 bosch
-8 feed -6 return
Fcs fuel cell
ID 2000s
Fuel lab regulator
Weldon Fuel filter
E98
Trans
Gsr trans with Liberty gears
Liberty cuff
Quaife Diff
Turbo
Boostflow t4/44 top mount
Dual MVRs
T1 Bbg solenoid
Borg warner S400 67 mm billet
4 Inch up pipe
Electronics
Motec M4
Motec Harness
T1 Ultimate Ignitioin kit w/ Pro drag4
Aim Mxl strada
Special thanks to T1 for tech support and guidence on build. Brother in Law for helping with putting car together.
Car is currently at dyno right now waiting on a few more parts . Ran into some issues with fuel regulator so got a Weldon on the way from T1.
Heres the Build. Enjoy!
Motor-
b18c1 golden eagle sleeves
Wiseco 9.0 pistons 82 mm bore
Eagle big bolt rods
Gsr crank
Oem Oil Pump
Oem water pump
Head-
Gsr head
Supertech valvetrain-valves,springs,retainers
Pro 1s
Port polished
Edelbrok Victor x manifold w/ blox 74mm tb
B&R Oil catch kit
Fuel-
Dual 044 bosch
-8 feed -6 return
Fcs fuel cell
ID 2000s
Fuel lab regulator
Weldon Fuel filter
E98
Trans
Gsr trans with Liberty gears
Liberty cuff
Quaife Diff
Turbo
Boostflow t4/44 top mount
Dual MVRs
T1 Bbg solenoid
Borg warner S400 67 mm billet
4 Inch up pipe
Electronics
Motec M4
Motec Harness
T1 Ultimate Ignitioin kit w/ Pro drag4
Aim Mxl strada
Special thanks to T1 for tech support and guidence on build. Brother in Law for helping with putting car together.
Car is currently at dyno right now waiting on a few more parts . Ran into some issues with fuel regulator so got a Weldon on the way from T1.
Trending Topics
#11
Honda-Tech Member
Thread Starter
#18
#19