tony1

While we didn't get many runs at the Oklahoma IFO race, we got enough footage for a quick little video so Andrew threw this together. Enjoy.

http://youtu.be/8-ROKqEBFj8

ohsnapzafingcu

iTrader: (2)

and yo Tony, you were supposed to hold my hand for the photos at the end :p

2fast4u831

Very nice man! Is the motor ok?

tony1

No, motor's gonna need some work. lol Stayed in it all through 4th, blew on the 3/4 shift.

Boosted_01 R

looks like a 8.2x was possible that day........... reason for it going lean ?

izzles01

Good lord, thing sounds clean... like the vinyl scheme

0Janet@bisimoto

Great vid!

tepid1

Ran lean or finally realized the fuel sucks? It has a small window of "safety". At least that is what I have gathered.

tony1

I didn't run the fuel through the secondaries before the event so the 'swelling' on the ID2000's that causes a reduction in fuel flow happened between round 1 and 2, was 10% leaner on the 2nd pass.

Definitely had a .2 in it on a better track, it's never had a traction problem in 3rd like this. You can hear the tires spinning all through 1st, 2nd, 3rd.

0Innes

iTrader: (3)

yep...you sir are still the man.

just a man with a bunch of hurt engine parts now.

miller

Fuel sucks? Small window of safety? Where do you get such information?

narfdanarf

might as well throw some bars on the back of it at this point.

tony1

Yup, pretty much a hot rod car. Love all the cheap shots from the upper west coast lately with the 76mm turbo...

JFK78

Sucks? The fuel is great.

As far as window of safety, I have run it at everywhere from 12.0-10.8:1 AFR's in the Outlaw car and not hurt anything.

We've made 18 passes plus a fair amount of dyno time on it now, 8.29-8.50 @ 180-190mph range. Our car has been on the same engine all this year, it works just fine and has not caused any damage to our engine.

When running it with ID2000's you have to be aware of the shrinkage and that the injectors will go back if not submerged in the fuel. I have always run the car on all 8 injectors when while warming it up to make sure that the secondaries have swelled before making any passes. If you don't do that, I can see issues with AFR's getting leaner after the first pass.

All motor setups are much more sensitive to the tune, safe AFR and timing levels will be different than other fuels. I made a mistake and ran our car too lean on it initially and hurt the motor at the track. We since re-tuned it much richer and and it wanted much less timing that way as well. No problems with the motor since.

tuhboek

great video!

DDTECH

Good job tony.. real good job.

Good info from SF and as always miller, the fuel works..congrats on your hard work of putting it together..

Got traction

No one likes a quitter

tony1

Haha. Moving up, not quitting.

98.4DR.EK.D16

many props my good sir! i have heard great things about you and your company

Got traction

Just joking. You know you hold a special place in my heart. Right next to the redbull vodka.

JFK78

LMFAO!!

Nitrous shots from the KS guys
76mm shots from the T1 camp
Cheap shots from the SF fans

Let's just all take shots!!

Got traction

hahahahahahaha

jdm inc

iTrader: (11)

good stuff tony! keep up the good work!

itsukivr6

nice video, and grats on the 8.32

FrankFast...

What this guy said lol