T1 Dyno Video
#1
Honda-Tech Member
Thread Starter
T1 Dyno Video
Hey guys, here's a quick video of some testing we've been doing getting ready for the BOTI race this weekend.
We installed Motec's new knock control module and some new Web cams. We're going to leave it here and do the rest at the track this weekend. The dyno won't apply enough load for it to make big boost. This was at 330kpa, 863whp and 519tq.
http://www.youtube.com/watch?v=rCb6_W0RzMk
We installed Motec's new knock control module and some new Web cams. We're going to leave it here and do the rest at the track this weekend. The dyno won't apply enough load for it to make big boost. This was at 330kpa, 863whp and 519tq.
http://www.youtube.com/watch?v=rCb6_W0RzMk
#7
Honda-Tech Member
Join Date: Apr 2008
Location: Osceola, Indiana
Posts: 1,064
Likes: 0
Received 0 Likes
on
0 Posts
Re: T1 Dyno Video
Ive always wondered how your o2 likes that open dump out the hood. wont you get false readings with it being so close to the atmosphere?
Trending Topics
#21
Honda-Tech Member
Thread Starter
Re: T1 Dyno Video
These are the cams. The quality of everything is amazing.
And yes, those are 275/50/15 Nitto drag radials for the dyno.
As far as the 02 sensor in the exhaust, I don't get any exhaust reversion at all and I have 4 wideband 02 sensors, one in each runner as well, just in case.
And yes, those are 275/50/15 Nitto drag radials for the dyno.
As far as the 02 sensor in the exhaust, I don't get any exhaust reversion at all and I have 4 wideband 02 sensors, one in each runner as well, just in case.