Rear mount Twin turbo ZO6 drag radial build.....
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2000
Location: Zoo York
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
Rear mount Twin turbo ZO6 drag radial build.....
Here's a few pics of a build nearing completion in the shop. Hoping to break some records in the near future. I have more updated pics; Ii just have to pull them off the camera! It's a 2001 Corvette Z06. The worlds fastest and quickest LSX on a drag radial with a best time of 7.76 @ 185.56. The car has gone 7.54 @ 187.89 on a 10.5" as well. It retains full factory frame rails, body panels, full glass (and as much as we tell him he doesnt need it...) power windows... It had a single mounted 106mm turbo previously until the decision to make more power and go faster was made... and this is what was come up with.......
For more info on the car check out Corvettemajor.com
here's a vid of the car from the past...
7.549 @ 187.89
6' aluminum bends...
For more info on the car check out Corvettemajor.com
here's a vid of the car from the past...
7.549 @ 187.89
6' aluminum bends...
#3
Join Date: Jul 2007
Location: Vaudeville, United States
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rear mount Twin turbo ZO6 drag radial build..... (BrownDx)
I believe bigtom used the wrong termonology and meant to say they're fabricating some pieces for that car. That corvette is/useto be a customer of Vette Doctors.
Trending Topics
#8
Honda-Tech Member
Join Date: Nov 2001
Location: Alabama, us
Posts: 10,759
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BLK JDM)
Very nice work but I see some very important things that are missing.
The inlet pipe for the compressor should be made from 1/8 thick stainless for safety reasons, this is in case the compressor wheel lets go. You don't want a compressor to let go and then be making laps inside the car with the driver. The other thing I see that is missing is the turbine housing shield and down pipe shield. Putting turbos inside the car has its advantages but it is very dangerous and must have safety shielding put in place to protest the driver or passenger. A turbo letting go is like a grenade going off in the car.
In the lab turbine wheels have ran all the way up the exhaust pipe on to the roof (3 stories) and across the top of the building. I can't imagine that happening inside the car.
The inlet pipe for the compressor should be made from 1/8 thick stainless for safety reasons, this is in case the compressor wheel lets go. You don't want a compressor to let go and then be making laps inside the car with the driver. The other thing I see that is missing is the turbine housing shield and down pipe shield. Putting turbos inside the car has its advantages but it is very dangerous and must have safety shielding put in place to protest the driver or passenger. A turbo letting go is like a grenade going off in the car.
In the lab turbine wheels have ran all the way up the exhaust pipe on to the roof (3 stories) and across the top of the building. I can't imagine that happening inside the car.
#9
Honda-Tech Member
iTrader: (3)
Join Date: Feb 2003
Location: wEsT of WattS...NoRth oF CompTon, CA
Posts: 4,946
Received 0 Likes
on
0 Posts
Re: (BLK JDM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BLK JDM »</TD></TR><TR><TD CLASS="quote">Pics not working for me but I went to the website!!
That's some sick fab work!!</TD></TR></TABLE>
x2
That's some sick fab work!!</TD></TR></TABLE>
x2
#10
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rear mount Twin turbo ZO6 drag radial build..... (Victor Vaughn)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Victor Vaughn »</TD></TR><TR><TD CLASS="quote">I believe bigtom used the wrong termonology and meant to say they're fabricating some pieces for that car. That corvette is/useto be a customer of Vette Doctors.</TD></TR></TABLE>
yes it USED to be a customer of vette doctors. No longer in affiliation with each other.
yes it USED to be a customer of vette doctors. No longer in affiliation with each other.
#12
Honda-Tech Member
Join Date: Nov 2001
Location: Alabama, us
Posts: 10,759
Likes: 0
Received 0 Likes
on
0 Posts
Re: (miller)
I have seen the video when good turbos go bad and it is very ugly when a turbo says f*ck it I can't take no more of this, I am out. LOL
Kick *** work guy's.
Kick *** work guy's.
#14
Honda-Tech Member
Join Date: Aug 2005
Location: LONG ISLAND, NY, USA
Posts: 1,600
Likes: 0
Received 0 Likes
on
0 Posts
Re: (rota92)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rota92 »</TD></TR><TR><TD CLASS="quote">That's nasty lol </TD></TR></TABLE>
..the pics do no justice. Up close and personal is another story. this car is nuts!
..this owner was upset at the the fact that is was only making 1400hp with the single 106mm and not running to full potential. This twin setup is gonna be wicked..can't wait to see it run.
..the pics do no justice. Up close and personal is another story. this car is nuts!
..this owner was upset at the the fact that is was only making 1400hp with the single 106mm and not running to full potential. This twin setup is gonna be wicked..can't wait to see it run.
#18
Honda-Tech Member
Join Date: Apr 2006
Location: New Zealand, New Zealand
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Innes)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Innes »</TD></TR><TR><TD CLASS="quote">Very nice work guys </TD></TR></TABLE>