Race Car Classifieds
#1
Better than steak
Thread Starter
Join Date: Jan 2000
Posts: 16,859
Likes: 0
Received 0 Likes
on
0 Posts
Race Car and parts Classifieds
<FONT SIZE="4">Please read the rules for the new thread</FONT>
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it.
3) you are ONLY allowed ONE post in this thread.
4) NO WTB ADDS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
I will delete any BS I feel does not belong in here.
art
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it.
3) you are ONLY allowed ONE post in this thread.
4) NO WTB ADDS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
I will delete any BS I feel does not belong in here.
art
#3
Honda-Tech Member
Re: Race car parts
Red AEM cam gears B-series $100
Single cam distributor for non obd B16 Setup for MSD ignition $75
Golden eagle water pump block off New $80
B16 cable trans $300
Simpson drag suit Medium size Like New $250
Aeromotive fuel filter -10 an With xrp fittings All New $75
Modified by 2.0Coupe at 8:44 PM 12/4/2006
Modified by HR-1320 at 9:48 PM 12/11/2006
Modified by HR-1320 at 11:11 PM 9/30/2007
Single cam distributor for non obd B16 Setup for MSD ignition $75
Golden eagle water pump block off New $80
B16 cable trans $300
Simpson drag suit Medium size Like New $250
Aeromotive fuel filter -10 an With xrp fittings All New $75
Modified by 2.0Coupe at 8:44 PM 12/4/2006
Modified by HR-1320 at 9:48 PM 12/11/2006
Modified by HR-1320 at 11:11 PM 9/30/2007
#4
Honda-Tech Member
Join Date: Aug 2002
Location: Roma Red, NY
Posts: 2,792
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Car and parts Classifieds (Arturbo)
<FONT COLOR="red"><FONT SIZE="3">NEW PRICES</FONT></FONT>
<FONT COLOR="blue">Jim Fab Traction bars will fit Civics 96-00 not SI's and 94-01 Integras </FONT>$210
Modified by sleeprhatch at 12:03 AM 12/28/2006
<FONT COLOR="blue">Jim Fab Traction bars will fit Civics 96-00 not SI's and 94-01 Integras </FONT>$210
Modified by sleeprhatch at 12:03 AM 12/28/2006
#5
Honda-Tech Member
Join Date: Nov 2002
Location: Motown
Posts: 1,280
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Car and parts Classifieds (turbotypeR)
Eibach 150LB springs. Pair of 2.5 in diameter, 7" long. great for rear when running wheelie bars.
$75
Fiberglass hatch for EG. painted black. No licence plate hole. Old MB part. weighs like nothing
$100
NRG locking hood pins, Carbon Fiber... never used.. all parts included.
$25
Modified by ykracing at 7:31 PM 4/23/2007
Modified by ykracing at 9:45 AM 5/17/2007
Modified by ykracing at 9:46 AM 5/17/2007
Modified by ykracing at 2:50 PM 7/17/2007
Modified by ykracing at 9:22 AM 9/17/2007
#7
Junior Member
Join Date: Feb 2004
Location: Fairfax, VA Via Chicago, IL, Va, USA
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Car and parts Classifieds (Arturbo)
2 Aerospeed Carbon seats. these seats have never been used. They are in Awesome condition. the seats retail for $599 each plus brackets. Selling both seats for $600 with brackets. Buyer pays shipping.
Also a used RECARO Pro Hans seat. seat reatails for $1500 selling for $500 OBO. This seat was used my Marty Ladwig. This is the seat he used when he went 200 mph. Own a piece of Drag Racing History. Sorry had to put that in there.
1 set of new never used or mounted Mickey Thompson slicks 29.5/10.5/15
$200 OBO
1 set of never used or mounted Mikey Thompson slicks 28/10.5/15 CL
$200 OBO
Also a used RECARO Pro Hans seat. seat reatails for $1500 selling for $500 OBO. This seat was used my Marty Ladwig. This is the seat he used when he went 200 mph. Own a piece of Drag Racing History. Sorry had to put that in there.
1 set of new never used or mounted Mickey Thompson slicks 29.5/10.5/15
$200 OBO
1 set of never used or mounted Mikey Thompson slicks 28/10.5/15 CL
$200 OBO
Trending Topics
#8
Honda-Tech Member
Join Date: Mar 2002
Location: sacramento, ca, usa
Posts: 3,818
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SOHCboost)
spearco water to air intercooler for sale :: make an offer:::
15x8 in wheel with 23in M&H slicks 4x114.3. 2 passes on slicks
innovative MSBC-1 boost controller. Used for a dyno session... Make a reasonable offer
Modified by flip1199 at 4:50 PM 9/25/2007
15x8 in wheel with 23in M&H slicks 4x114.3. 2 passes on slicks
innovative MSBC-1 boost controller. Used for a dyno session... Make a reasonable offer
Modified by flip1199 at 4:50 PM 9/25/2007
#10
Honda-Tech Member
Re: Re: (stealthmode62)
PTE 1000cc Injectors used for 500 miles - $250
Garrett GT4088R 1.06 a/r T4 brand new - $1500
Garrett 60-1 .63 a/r T3 brand new - $700
obd2a-obd1 new conversion harnesses (Boomslang) - $70
Mazworx new scatter shields 1 for stock style clutch and one for tilton style - $210 each
Avid racing tracion bars for 96-00 civic, may fit 92+ civic - $250
Brand new ford 3.8L FWD engine, new not remain - $300
T25 turbo off a 2002 saab 95, works great but smokes a little - $50
K03 turbo off a 2004 VW GTI 20k miles, off a good running car - $100
Possibly a built sleeved GSR engine (CP pistons, Pauter rods, Portflow head, Benson sleeves... brand new never run) - Make offers
1997 pontiac grand prix gt, needs some work, looks nice, 2001 engine. Best offer
Garrett GT4088R 1.06 a/r T4 brand new - $1500
Garrett 60-1 .63 a/r T3 brand new - $700
obd2a-obd1 new conversion harnesses (Boomslang) - $70
Mazworx new scatter shields 1 for stock style clutch and one for tilton style - $210 each
Avid racing tracion bars for 96-00 civic, may fit 92+ civic - $250
Brand new ford 3.8L FWD engine, new not remain - $300
T25 turbo off a 2002 saab 95, works great but smokes a little - $50
K03 turbo off a 2004 VW GTI 20k miles, off a good running car - $100
Possibly a built sleeved GSR engine (CP pistons, Pauter rods, Portflow head, Benson sleeves... brand new never run) - Make offers
1997 pontiac grand prix gt, needs some work, looks nice, 2001 engine. Best offer
#11
Honda-Tech Member
Join Date: Jul 2003
Location: Fort Worth, Tx., US
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
Re: (preludedriva)
New in box Competition clutch with all hardware. Has updated pressure plate not the older one. $sold
for hydro b series
looking for used Motec m4 or m48. (still looking) 1-1-07
Modified by philipwight at 10:01 PM 12/12/2006
Modified by philipwight at 10:11 PM 1/1/2007
for hydro b series
looking for used Motec m4 or m48. (still looking) 1-1-07
Modified by philipwight at 10:01 PM 12/12/2006
Modified by philipwight at 10:11 PM 1/1/2007
#13
Junior Member
Join Date: Jan 2002
Location: Baton Rouge, LA
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Car and parts Classifieds (Arturbo)
Well, here it is. I hate to sell my car, but I just don't have the time to keep up with it anymore. I will list the mods I can remember here and post my receipts as soon as I can get them all on the computer. Car is a 1993 civic Si. Runs consistent 10 second passes with a best of 10.75@137mph. It was my daily driver for about a year and then it has been since turned into a weekend car. Always garage kept since day one. It can still be daily driven, I just chose to buy a new truck to drive around instead of putting wear and tear on the motor of the hatch. If you have any questions at all please give me a call at 225-936-1834 or pm me on here.Name is Chris. Car is located in Denham Springs, LA. Vin#2HGEH3387PH516655 I would like to get $12,000 OBO for it. I have well over that just in the motor.
Mod list below..
B18c1
Benson sleeves
Pauter rods
CP pistons
GSR head
CTR cams
supertech valvetrain
-Full-Race stainless steel 3 inch down pipe
Brand new Garrett GT35/67R turbo
-Custom stainless steel 3 inch exhaust dumped under the car with two 3 inch stainless steel Top Speed resonators
-38mm Tial waste gate
-Custom stainless steel waste gate dump tube
-XS Engineering 24x11x3 air to air intercooler
-Blitz blow-off valve
-GReddy oil catch can
-C&R aluminum radiator with slim fan
-MSD digital 6 ignition with external coil (has a 2-step rev limiter)
-Competition Clutch 4-puck disc with sprung hub
-JDM GS-R transmission with factory limited slip differential
Engine and Fuel Management
-Hondata S200 with boost
-Precision 880cc injectors
-AEM fuel rail
-Walboro/BBK 255lph HO in tank fuel pump
Outside
-2003 BMW M3 Carbon Black Metallic paint
-JDM **** Carbon fiber duckbill spoiler
-JDM Civic corner lenses
-Carbon fiber sunroof replacement
Suspension and Brakes
-Energy Suspension rear motor mount insert
-Place Racing solid upper motor mount inserts
-Brembo blank rotors
-Hawk HPS brake pads (front)
-AEM brake pads (rear)
-JG/Edelbrock stainless steel braided brake lines
Interior
-Civic DelSol seats
-Skunk2 shift ****
-Civic Type R shift boot
-JDM Civic gauge cluster
-JDM Civic climate control
-JDM Civic clock
-JDM Civic rear defroster switch
Gauges and Electronics
-Alpine CD/MP3 player
-GReddy 60mm peak and hold oil pressure gauge
-GReddy 60mm peak and hold boost gauge
-GReddy 60mm peak and hold exhaust temperature gauge
-GReddy turbo timer
-Apex-i AVC-R boost controller
Modified by carbonblackeh at 4:50 PM 12/14/2006
#16
Honda-Tech Member
Join Date: Jul 2004
Location: QC, AZ
Posts: 1,731
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Car and parts Classifieds (boostedcivicsir)
SO CAL Welds w/ rubber for $1300.00
M&H 24.5X9.5X13 on welds 13X8
M&H 22X3.5X15 on welds 15inch
plus shipping
they are 4x100
paypal or local
562-307-6552
Modified by Chain Driven at 5:55 PM 1/1/2007
M&H 24.5X9.5X13 on welds 13X8
M&H 22X3.5X15 on welds 15inch
plus shipping
they are 4x100
paypal or local
562-307-6552
Modified by Chain Driven at 5:55 PM 1/1/2007
#17
Honda-Tech Member
Join Date: May 2006
Location: 518
Posts: 10,662
Likes: 0
Received 0 Likes
on
0 Posts
Crower Stage III drag spec 63403 Camshafts
Used for 2 quarter mile passes...sitting in original packaging - practically brand new.
Accepting all resonable offers and willing to trade for turbo parts. Also included can be a set of UGR Cam Gears (NIB) 6 bolt, fully adjustable.
Accepting all resonable offers and willing to trade for turbo parts. Also included can be a set of UGR Cam Gears (NIB) 6 bolt, fully adjustable.
#18
Re: Race Car and parts Classifieds (Arturbo)
DPR Stage VII Cylinder Head - $2150
-99 Civic Si B16
-DPR .5mm oversized intake and exhaust valves
-DPR Dual valve springs
-DPR Titanium Retainers
-Calico Coated Combustion Chambers, Valves, Valve Stems, Valve Face, Intake and exhaust ports.
-ZERO MILES NEVER INSTALLED
Crower 4340 Steel Billet Connecting Rods B18C1 - $325
-Like new
-Used for 2 events, roughly 8 passes
AEM EMS with Wideband Controller and LSU4.2 Wideband Sensor - Plug and Play 99 Civic Si - $950 SOLD!!!!!!!!
-Used for 6 months
-Functionally sound, casing has a few scratches on it
If you have any questions please email ssc315@sbcglobal.net
Here are the pics
Modified by SSC1 at 8:22 PM 12/19/2006
Modified by SSC1 at 4:56 PM 1/5/2007
-99 Civic Si B16
-DPR .5mm oversized intake and exhaust valves
-DPR Dual valve springs
-DPR Titanium Retainers
-Calico Coated Combustion Chambers, Valves, Valve Stems, Valve Face, Intake and exhaust ports.
-ZERO MILES NEVER INSTALLED
Crower 4340 Steel Billet Connecting Rods B18C1 - $325
-Like new
-Used for 2 events, roughly 8 passes
AEM EMS with Wideband Controller and LSU4.2 Wideband Sensor - Plug and Play 99 Civic Si - $950 SOLD!!!!!!!!
-Used for 6 months
-Functionally sound, casing has a few scratches on it
If you have any questions please email ssc315@sbcglobal.net
Here are the pics
Modified by SSC1 at 8:22 PM 12/19/2006
Modified by SSC1 at 4:56 PM 1/5/2007
#19
Honda-Tech Member
Join Date: Oct 2004
Location: lancaster, ca, usa
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
first $100.00 takes car 95 coupe as is.has chromoly cage.email me crxbyjon@hotmail.com
waterman fuel pump sprint 500 for b18 cam drive.brand new.$750.00 or trade for twin disc clutch for b18
waterman fuel pump sprint 500 for b18 cam drive.brand new.$750.00 or trade for twin disc clutch for b18
#20
FS: Circuit Worx stg2 driveline kit
Selling one brand new never used CircuitWorx stg2 driveline system. System includes:
L&R cv axles (stg2)
stg2 sized intermediate shaft with carrier
hubs with extended studs (Accord spline size)
drag spool
Paid $2400 few months ago, sacrifice at reasonable offers above $1700. I know most guys run DSS stg5s and a spool or quaife, which is around the same price as my stuff but if you've ever seen the size difference between the CircuitWorx stg2 stuff and everything else you'll understand why its the best. These things are beefy!
L&R cv axles (stg2)
stg2 sized intermediate shaft with carrier
hubs with extended studs (Accord spline size)
drag spool
Paid $2400 few months ago, sacrifice at reasonable offers above $1700. I know most guys run DSS stg5s and a spool or quaife, which is around the same price as my stuff but if you've ever seen the size difference between the CircuitWorx stg2 stuff and everything else you'll understand why its the best. These things are beefy!
#21
Member
Join Date: Feb 2005
Location: the greatest landscape architect is pictured above, gotta love the lack of home land security, socal
Posts: 2,389
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Garage 808 Hatch)
i have brand new slicks ranging from 17's to 19's. sizes vary from 285/645/17 to 345/705/19. i have mainly goodyear, pirelli p-zero's, and yokohamas. pm for more detail. each tire retails for well over $350 a tire but i'll cut a mind blowing deal with you if you buy em as a pair or if i dont have to ship them out.
pics will soon come!!!
pics will soon come!!!
#22
Junior Member
Join Date: May 2002
Location: Chicago, IL, USA
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Il post some pics in the midway when I go through the rubermaid containers. I have a Stroud Parachute. It was mocked up on a car but never used. Its the loaded spring version. Il try to take some pics. Il take 225 for it.
#23
Honda-Tech Member
Join Date: Jan 2003
Location: Elkinspark, pa, usa
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Car and parts Classifieds (Arturbo)
Black 96 Coupe, very clean, very fast. Best pass with slicks 10.7@129, Drag Radials 11.3@124. These are about 50hp ago...
2.4 swap, srt pistons and rods, Hahn 25G turbo and manifold, Hahn intercooler, 3" exhust with muffler,Crane 18's,Crane valve springs, DCR head studs, fully built auto trans, 7 1/2" torque converter,Torson diff, Megasquirt standalone, Tech Edge wideband, duel external fuel pumps, Bosch 1600cc injectors, full stainless fuel lines, Paxton FPR, DSS Stage 5 axles, 225-50-15 BFG's. Roll cage with door flip outs and removable harness bar, currant harness. Streetable and reliable. NHRA Sport FWD and NOPI Power Street Legal $9000 OBO
Car is located in Pa close to Philla
2.4 swap, srt pistons and rods, Hahn 25G turbo and manifold, Hahn intercooler, 3" exhust with muffler,Crane 18's,Crane valve springs, DCR head studs, fully built auto trans, 7 1/2" torque converter,Torson diff, Megasquirt standalone, Tech Edge wideband, duel external fuel pumps, Bosch 1600cc injectors, full stainless fuel lines, Paxton FPR, DSS Stage 5 axles, 225-50-15 BFG's. Roll cage with door flip outs and removable harness bar, currant harness. Streetable and reliable. NHRA Sport FWD and NOPI Power Street Legal $9000 OBO
Car is located in Pa close to Philla
#24
Honda-Tech Member
Join Date: Dec 2001
Location: Indianapolis, IN, usa
Posts: 729
Likes: 0
Received 0 Likes
on
0 Posts
Y21 Tranny
I have decided not to swap this into my car.
Y21 B16 Hydro Tranny with Richmond Spool #80-1006-1
From a 99 Civic Si. Tranny has 45000 miles and the spool has maybe 6 passes on it when it was in a LS tranny. This Y21 has just had the spool professionally installed and has 0 passes on the tranny. Awsome condition with no grinds and low miles.
Looking for $700OBO. I have $400 in the spool and another $450 in the tranny. Like I said it is mint and shows. Can get pics. PM me.
Y21 B16 Hydro Tranny with Richmond Spool #80-1006-1
From a 99 Civic Si. Tranny has 45000 miles and the spool has maybe 6 passes on it when it was in a LS tranny. This Y21 has just had the spool professionally installed and has 0 passes on the tranny. Awsome condition with no grinds and low miles.
Looking for $700OBO. I have $400 in the spool and another $450 in the tranny. Like I said it is mint and shows. Can get pics. PM me.
#25
Junior Member
Join Date: Oct 2002
Location: brick, nj, usa
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
I've had a lot of interest in people looking for just the wheels and tires, however a few people have shown interest in the whole car, so at this point I'm not going to part the wheels and tires as I just want to move everything out. I figure this is easier than writing back to 15 people saying the same thing.
SOLD
Modified by 93accordNOS at 2:03 PM 12/31/2006
SOLD
Modified by 93accordNOS at 2:03 PM 12/31/2006