question about slicks for honda accord
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
question about slicks for honda accord
whats up everyone i have 2 questions about slicks.. its allitle late to ask this one but what size slick would you reccomend to use on a 96 honda accord... 2.2 turbo making 316 hp and 300 ft/lbs torque stock tranny with just an lsd and upgraded clutch... i ended up getting a set of 24.5 micky thompsons for cheap on 15'' traklite wheels.. i can sell them if there not a good choice but if they will work then that would be good...... also what psi should i use or start with when i go to the trackk... any questions or information needed please ask and ill do my best to fill you in ...thanks
#2
Re: question about slicks for honda accord
your trklite wheels are 4by114?
15by24.5 m/t are good i hope there not beat up
run them at 10psi to start see ow your 60ft is and lower them to 8 next pass see if your 60 gets better
15by24.5 m/t are good i hope there not beat up
run them at 10psi to start see ow your 60ft is and lower them to 8 next pass see if your 60 gets better
#3
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Re: question about slicks for honda accord
my bad motegi traklites lol.. and ya they have 2 passes on them plenty of life left... ill keep 10 psi in mind see what other people think thnx man....
#4
Honda-Tech Member
Re: question about slicks for honda accord
A 24.5 is better suited for 4-500whp+...they will work 1000x better than any street tire. But i would think a 23x8 may be a bit more ideal
Thread
Thread Starter
Forum
Replies
Last Post