Nov FS thread
#1
Moderator
Thread Starter
Nov FS thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
#2
Re: Nov FS thread
Going a different direction with the build so need to sell some stuff.
For faster response text 757-818-2917
****ALL PRICES INCLUDE SHIPPING AND PAYPAL FEES****
Hondata S300 in p28 ecu-450
Hondata CPR -320
Full-race T4 twin scroll manifold flanged for 44mm gates. Some dyno time and 4 passes on this manifold-900
Two Tial 44mm gates. One used one brand new(just mounted for mock up) new one will come with box and all wastegate springs. New-300Used-**SOLD**
Tial Q BOV used in perfect condition-180
NLR AMS 1000 boost controller BNIB-750
Garrett intercooler core 27.8x12.7x5.1 1260 hp rated BNIB-550 ***NOT INCLUDING SHIPPING DUE TO WEIGHT***
For faster response text 757-818-2917
****ALL PRICES INCLUDE SHIPPING AND PAYPAL FEES****
Hondata S300 in p28 ecu-450
Hondata CPR -320
Full-race T4 twin scroll manifold flanged for 44mm gates. Some dyno time and 4 passes on this manifold-900
Two Tial 44mm gates. One used one brand new(just mounted for mock up) new one will come with box and all wastegate springs. New-300Used-**SOLD**
Tial Q BOV used in perfect condition-180
NLR AMS 1000 boost controller BNIB-750
Garrett intercooler core 27.8x12.7x5.1 1260 hp rated BNIB-550 ***NOT INCLUDING SHIPPING DUE TO WEIGHT***
Last edited by NAVY AWS; 11-17-2013 at 03:14 PM.
#3
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2006
Location: Ponca City, Oklahoma, United States
Posts: 405
Likes: 0
Received 5 Likes
on
4 Posts
Re: Nov FS thread
I lost a motor my last race and Im parting out the turbo stuff for now. I plan to build something bigger over the course of the next year. All parts are used and all turbo parts made close to 800hp. Cylinder head restricted power. Prices do not include shipping, buyer will pay shipping. Payments through PayPal, send as a gift or include 3% for PP fees.
Not all parts pictured are for sale. Only the ones listed below.
I need these parts sold ASAP, serious inquiries only please.
Garret 900hp intercooler w/custom end tanks. Hot side is backdoor. When I bought it there was some damage on the back where it looks like the wastgate hit it hard and it leaked. Had it welded up by a fantastic welder I know in Wichita and there is no leak. Close to 40psi and no leaks. - 380
AFI twin scroll turbo manifold w/38mm mvs gate flanges. Its an older design so it doesnt have the logo on it. Coated for high temp, but has scratches on it from being stored and moved around. Can be bought with with the hood exit exhaust for a little extra. used on a precision turbo, so 3" in and 4" out the hood. made custom specifically for this manifold - 630 obo or 730 obo with up pipe.
Ultra shield fire jacket. SFI 3-2A/1 Perfect condition, only wore it twice. XL - 50
AEM UEGO wideband controller. Includes wideband sensor, all wiring, and guage. Guage has 3 faces and silver or black outer ring. Guage has led sweep and digital indicator. - 120 shipped
Text me for info and if you're interested, or PM me. 580-304-3840
I do accept deposits where I can hold the part for you, but the deposit is non refundable.
If you contact me and are not interested, even after making an offer, please let me know your are no longer interested. And again, Serious Inquiries only.
Not all parts pictured are for sale. Only the ones listed below.
I need these parts sold ASAP, serious inquiries only please.
Garret 900hp intercooler w/custom end tanks. Hot side is backdoor. When I bought it there was some damage on the back where it looks like the wastgate hit it hard and it leaked. Had it welded up by a fantastic welder I know in Wichita and there is no leak. Close to 40psi and no leaks. - 380
AFI twin scroll turbo manifold w/38mm mvs gate flanges. Its an older design so it doesnt have the logo on it. Coated for high temp, but has scratches on it from being stored and moved around. Can be bought with with the hood exit exhaust for a little extra. used on a precision turbo, so 3" in and 4" out the hood. made custom specifically for this manifold - 630 obo or 730 obo with up pipe.
Ultra shield fire jacket. SFI 3-2A/1 Perfect condition, only wore it twice. XL - 50
AEM UEGO wideband controller. Includes wideband sensor, all wiring, and guage. Guage has 3 faces and silver or black outer ring. Guage has led sweep and digital indicator. - 120 shipped
Text me for info and if you're interested, or PM me. 580-304-3840
I do accept deposits where I can hold the part for you, but the deposit is non refundable.
If you contact me and are not interested, even after making an offer, please let me know your are no longer interested. And again, Serious Inquiries only.
Last edited by hondaracing84; 11-19-2013 at 05:38 PM.
#6
Honda-Tech Member
iTrader: (1)
Re: Nov FS thread
Weld Racing Magnum wheels Fronts: 15x8.25 w/26x10x15 M+H Rears: 15x3.5 w/24x5x15 M+H slicks and wheels have only 12 track passes on them...check pictures for tread depth WILL COME WITH PROPER LUG NUTS - REARS ARE SOLD! Fronts for 1000 picked up
Thermal 3" SS Turbo Exhaust for EK in great condition no dents or scrapes painted tip black for sleeper look - 350 OBO
Brand new 3" intercooler piping polished - 260
Brand new DSS 5.9 axles with hubs (hubs were pressed into knuckles but never ran) comes with knuckles also as seen in the pic - 1700 picked up
MSD HVC II blaster coil with spark wire - 120
Autometer Oil pressure gauge with lines and all necessary sending units/sensors - 40
Meziere Water pump setup for B series - 300
A pair of M/T 24.5x8.5x13 slicks bought new beginning of the year ran 3 events ~10-15 passes - 250 OBO
A pair of M&H 24x3.6x15 skinnies tires still a lot of tread left - 250 OBO
take the set for 450
Thermal 3" SS Turbo Exhaust for EK in great condition no dents or scrapes painted tip black for sleeper look - 350 OBO
Brand new 3" intercooler piping polished - 260
Brand new DSS 5.9 axles with hubs (hubs were pressed into knuckles but never ran) comes with knuckles also as seen in the pic - 1700 picked up
MSD HVC II blaster coil with spark wire - 120
Autometer Oil pressure gauge with lines and all necessary sending units/sensors - 40
Meziere Water pump setup for B series - 300
A pair of M/T 24.5x8.5x13 slicks bought new beginning of the year ran 3 events ~10-15 passes - 250 OBO
A pair of M&H 24x3.6x15 skinnies tires still a lot of tread left - 250 OBO
take the set for 450
Trending Topics
#9
Honda-Tech Member
706-346-6024 matt.stover@comcast.net MSD Digital 6: $200 Shipped Precision 6766 Turbo, 1.32 ex, Only had Brad Penn through it, "Needs" Turbine shaft...had a little piece of something go through it but still makes full power: $600 shipped Top Mount T4 Divided Manifold, Dual wastegate 44mm, built in 2008 NEVER had a single crack or repair with many different turbos mounted on it from 6766 to S372: $700 Shipped WITH dump tubes and up pipe(Precision 46mm Flanged) Garrett Intercooler Custom Fabricated James from ebTec here in Atlanta area. 18"x12"x5" with vibrant vanjen flanges on each side. $550
Last edited by SPOOLINmatt; 11-29-2013 at 06:21 PM.
#10
Re: Nov FS thread
Everything is located in San Diego, but arrangements can be made for the non ship items to be picked up in Palmdale as well.
H22A4 Shortblock:
2001 H22A4 Shortblock. The block was attained from a Honda dealership in 2001. It was a warranty exchange on a new prelude that had a blown head gasket. Coolant leaked into one of the cylinders. The block just needs a simple bore/hone and its good to go. It comes with main caps, main studs and main girdle. I've had it for over a decade and unfortunately, I never got around to using it.
Asking $250 OBO - picked up
2001 H22A4 Crankshaft:
This crankshaft came out of the block I am selling. It is in excellent condition, no journal imperfections at all. It has been stored properly for as long as I've had it. It just needs to be micro-polished and it's good to go.
Asking $150 OBO picked up, or + shipping
H22 Cylinder Head:
This head is completely bare, comes with cam caps only. The head itself is in excellent condition. A perfect core for building.
Asking $250 OBO picked up, or + shipping
J35 (V6) Shortblock:
This is a complete J35 shortblock from the head gaskets down. All internals are included as well as the oil pan.
Asking $350 OBO - picked up
J32 Type S Cylinder Heads:
These heads are completely stock and both in excellent condition. Both front and rear heads sold together. The heads are disassembled but all valves, valve springs, retainers, keepers, rocker arm assemblies, etc will be included with the heads.
Asking $500 picked OBO up, or + shipping
Nuforms Rear suspension components:
This is the complete Mount/Bracket/LCA/Trailing Arm/Stabilizer Arm/Hardware kit/set from the Nuformz rear suspension kit for 92-00 Civics and 94-01 Integras. You just need to add your own struts from Stange, AJE, Lamb, etc, your own wheels and you'r good to go.
Asking $500 OBO picked up, or + shipping
PM me if you’re interested.
H22A4 Shortblock:
2001 H22A4 Shortblock. The block was attained from a Honda dealership in 2001. It was a warranty exchange on a new prelude that had a blown head gasket. Coolant leaked into one of the cylinders. The block just needs a simple bore/hone and its good to go. It comes with main caps, main studs and main girdle. I've had it for over a decade and unfortunately, I never got around to using it.
Asking $250 OBO - picked up
2001 H22A4 Crankshaft:
This crankshaft came out of the block I am selling. It is in excellent condition, no journal imperfections at all. It has been stored properly for as long as I've had it. It just needs to be micro-polished and it's good to go.
Asking $150 OBO picked up, or + shipping
H22 Cylinder Head:
This head is completely bare, comes with cam caps only. The head itself is in excellent condition. A perfect core for building.
Asking $250 OBO picked up, or + shipping
J35 (V6) Shortblock:
This is a complete J35 shortblock from the head gaskets down. All internals are included as well as the oil pan.
Asking $350 OBO - picked up
J32 Type S Cylinder Heads:
These heads are completely stock and both in excellent condition. Both front and rear heads sold together. The heads are disassembled but all valves, valve springs, retainers, keepers, rocker arm assemblies, etc will be included with the heads.
Asking $500 picked OBO up, or + shipping
Nuforms Rear suspension components:
This is the complete Mount/Bracket/LCA/Trailing Arm/Stabilizer Arm/Hardware kit/set from the Nuformz rear suspension kit for 92-00 Civics and 94-01 Integras. You just need to add your own struts from Stange, AJE, Lamb, etc, your own wheels and you'r good to go.
Asking $500 OBO picked up, or + shipping
PM me if you’re interested.
Last edited by RASE; 11-16-2013 at 06:42 AM.
#11
Honda-Tech Member
Join Date: Jul 2002
Location: Los Angeles, CA, USA
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
H22 Turbo Manifold - $500
Built by Innovative Turbo Sysytems back in 2003. Was fully polished, bead blasted now. T4 single scroll and two bolt 38mm wg flange. Thick wall stainless steel TIG welded construction. Very durable, been used on a street car for years. I'll include an adapter to run a 44mm v-band wg. Including downpipe too.
99-00 Carbon Fiber Hood with Custom Scoop for Full Race K24 manifold - $200
Tilton H22 Cerametallic Twin Disk Clutch - $750
Less than 10 passes. Excellent condition. Had my machinist clean up the flywheel bolt mounting surface, it got a bit worn.
H22 CNC Ported Cylinder Head. Ported by R&D Dyno Service. - $400
Includes cam caps, rocker assemblies, shafts, LMAs, dual springs and Ti retainers. Intake #3 has full valve guides, all other ports are cut back to the port wall. I'd recommend getting new springs and retainers.
Built by Innovative Turbo Sysytems back in 2003. Was fully polished, bead blasted now. T4 single scroll and two bolt 38mm wg flange. Thick wall stainless steel TIG welded construction. Very durable, been used on a street car for years. I'll include an adapter to run a 44mm v-band wg. Including downpipe too.
99-00 Carbon Fiber Hood with Custom Scoop for Full Race K24 manifold - $200
Tilton H22 Cerametallic Twin Disk Clutch - $750
Less than 10 passes. Excellent condition. Had my machinist clean up the flywheel bolt mounting surface, it got a bit worn.
H22 CNC Ported Cylinder Head. Ported by R&D Dyno Service. - $400
Includes cam caps, rocker assemblies, shafts, LMAs, dual springs and Ti retainers. Intake #3 has full valve guides, all other ports are cut back to the port wall. I'd recommend getting new springs and retainers.
#12
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2007
Location: beech bottom, wv, us
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
Everything is unused unless stated otherwise. Only put in for mock up.
5.5 gallon fuel cell. 350$ Fits oem location and neck same as FCS and NRG tanks. Made by Sean Ramey (RameyBuilt) never used or had fuel in it. Added float switch for a fuel level warning light. Twin 6an feeds. Could easily be cut out and bigger welded in.
450$obo Double back door Go Autoworks IC using VanJen clamps. Bov flange located on IC. 24x12x3.5 Turbonetics core.
500$ obo manifold alone.
700$ with all 3 dump tubes. Go Autoworks T4 Top Mount manifold. 44mm waste gate flange. Coated to match turbo. Can come with under car Wastegate dump. 3" hood exit down pipe. 3" under oil pan down pipe for use with your own exhaust. All are coated to match the turbo.
BDL Cam gears 100$ can come with REAL arp hardware for 130$
50$ Hard Race EG/DC camber kit. Never used.
5.5 gallon fuel cell. 350$ Fits oem location and neck same as FCS and NRG tanks. Made by Sean Ramey (RameyBuilt) never used or had fuel in it. Added float switch for a fuel level warning light. Twin 6an feeds. Could easily be cut out and bigger welded in.
450$obo Double back door Go Autoworks IC using VanJen clamps. Bov flange located on IC. 24x12x3.5 Turbonetics core.
500$ obo manifold alone.
700$ with all 3 dump tubes. Go Autoworks T4 Top Mount manifold. 44mm waste gate flange. Coated to match turbo. Can come with under car Wastegate dump. 3" hood exit down pipe. 3" under oil pan down pipe for use with your own exhaust. All are coated to match the turbo.
BDL Cam gears 100$ can come with REAL arp hardware for 130$
50$ Hard Race EG/DC camber kit. Never used.
Last edited by rogueeg6; 11-06-2013 at 04:56 PM.
#15
Honda-Tech Member
Join Date: Nov 2008
Location: naples,fl
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
Sleeved 84mm gsr longblock.. New cp flat top pistons, new eagle rods and bearings, moroso oil pan.
Gsr head no intake, skunk 2 tuner 2 cams,
Ppfab port job. Opened to 84mm. Skunk2 pro series springs and retainers with super tech valves.
Asking $3500 obo txt 239-248-7105
Gsr head no intake, skunk 2 tuner 2 cams,
Ppfab port job. Opened to 84mm. Skunk2 pro series springs and retainers with super tech valves.
Asking $3500 obo txt 239-248-7105
#16
Honda-Tech Member
Join Date: Dec 2005
Location: VA, USA
Posts: 2,146
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
Call or text 757-621-8641
Locash racing Billet Distributor cap & Distributor, for use with CPR upgrade- 150.00
Aem egt controller, 4 egt sensor, 2 extension harness all brand new $500
Brand New Darton b-series sleeve kit sold
Brand New Meziere Water pump part number wp361 55 GPM $400 EACH (have 2 of them)
USED M&W pro 10 ignition box $375
Ferrea Roller Rocker cams very little use I made 901 on 31 pounds with these cams. They are a custom spec. Cams make power you wont be disappointed $800
Locash racing Billet Distributor cap & Distributor, for use with CPR upgrade- 150.00
Aem egt controller, 4 egt sensor, 2 extension harness all brand new $500
Brand New Darton b-series sleeve kit sold
Brand New Meziere Water pump part number wp361 55 GPM $400 EACH (have 2 of them)
USED M&W pro 10 ignition box $375
Ferrea Roller Rocker cams very little use I made 901 on 31 pounds with these cams. They are a custom spec. Cams make power you wont be disappointed $800
Last edited by ShawnR; 11-12-2013 at 06:47 AM.
#18
Honda-Tech Member
Join Date: Mar 2011
Location: Phoenix, AZ
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
#19
Honda-Tech Member
iTrader: (1)
Re: Nov FS thread
Not everything is pictured. I have many vouches if you need them. These are what's left of my build.
skunk2 pro1 cams (B-series, installed but never ran, NEW)- $500
Golden Eagle thermal intake gasket for b16/ITR- $20
AEM 5bar Map Sensor (new)- $100
98 civic stock tank with sump / -10AN bung (new)- $100
B-series starter out of GSR (reman'd napa)- $50
B-series valve cover with -16AN bungs welded for catch can (painted wrink black and shaved, new gaskets, AN caps for bungs included)- $100
Edelbrock victor X 75mm throttle body with vanjen setup welded to inlet w/ adapter for Honda bolt pattern(TB is used, adapter plate and vanjen setup new)- $200
MFactory LSD for GSR with brand new with new bearings- $650
Precision 6266 / journal bearing / 1.32a/r divided T4 housing / Ported Shroud "S" cover (new in box)- $900
GSR OEM shift linkages- $80
S&W racecars parachute mount and anchor kit, cable, and lever kit (brand new)- $75
S&W racecars window net, blue (brand new)- $20
K20a2 PRB complete Cylinder head with cams and manifold
Selling a complete PRB cylinder head out of an acura rsx. This is the head you want to use when you convert you base model k20 or k24 to full vtec.
Complete with cams, sensors, and intake manifold. All stock and unmolested and ready to bolt on.
Asking $650/obo
Pics:
skunk2 pro1 cams (B-series, installed but never ran, NEW)- $500
Golden Eagle thermal intake gasket for b16/ITR- $20
AEM 5bar Map Sensor (new)- $100
98 civic stock tank with sump / -10AN bung (new)- $100
B-series starter out of GSR (reman'd napa)- $50
B-series valve cover with -16AN bungs welded for catch can (painted wrink black and shaved, new gaskets, AN caps for bungs included)- $100
Edelbrock victor X 75mm throttle body with vanjen setup welded to inlet w/ adapter for Honda bolt pattern(TB is used, adapter plate and vanjen setup new)- $200
MFactory LSD for GSR with brand new with new bearings- $650
Precision 6266 / journal bearing / 1.32a/r divided T4 housing / Ported Shroud "S" cover (new in box)- $900
GSR OEM shift linkages- $80
S&W racecars parachute mount and anchor kit, cable, and lever kit (brand new)- $75
S&W racecars window net, blue (brand new)- $20
K20a2 PRB complete Cylinder head with cams and manifold
Selling a complete PRB cylinder head out of an acura rsx. This is the head you want to use when you convert you base model k20 or k24 to full vtec.
Complete with cams, sensors, and intake manifold. All stock and unmolested and ready to bolt on.
Asking $650/obo
Pics:
Last edited by paulzy; 11-17-2013 at 07:05 PM.
#20
Honda-Tech Member
Join Date: Sep 2003
Location: Boston
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
BNIB Racepak IQ3 Display Dash with the Racepak Vnet cable. THIS IS THE DISPLAY ONLY VERSION, NOT THE LOGGING VERSION!!! It will then display what the AEM See's. $900 +shipped
M&w pro10 harness wit crane coil use for 10mins bought from T1 $250 shipped
Cannon 79pin(22awg) Comes wit pins & tools $125 shipped
Gsr intake manifold, Str fuel rail no fittings or filter , 90mm throttle body with tps & 3.5 v-band flange welded to it. $450
BNIB Areomotive A1000 & controller $450
The best way to get in contact wit me is text 617-719-1781
All items are + shipping & paypal
M&w pro10 harness wit crane coil use for 10mins bought from T1 $250 shipped
Cannon 79pin(22awg) Comes wit pins & tools $125 shipped
Gsr intake manifold, Str fuel rail no fittings or filter , 90mm throttle body with tps & 3.5 v-band flange welded to it. $450
BNIB Areomotive A1000 & controller $450
The best way to get in contact wit me is text 617-719-1781
All items are + shipping & paypal
Last edited by Boston Bastard; 11-06-2013 at 02:43 AM.
#22
Honda-Tech Member
Join Date: Oct 2009
Location: Follow the yellow brick road
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
#23
Honda-Tech Member
Re: Nov FS thread
For Sale Please Contact Via Email For fastest response juice2435@aol.com
Prices do not include paypal or shipping
Blox Ek Rear LCA -$60
Fidanza B Series Flywheel-$75
C02 Setup with bottle, regulator, Roll bar mount-SOLD
Jg Victor x 8 injector manifold for gsr heads powder coated black includes the lower fuel rail- $350
3.5" aluminum exhaust for an EK hatch (may fit others) perfect am street cars or mild turbo setups-$200 pick up only will meet if needed
74mm Blox Billet throttle body with VanJen ferrule welded on- SOLD
Golden Eagle b series fuel rail in black(no fittings)-SOLD
Jg Victor x manifold for GSr heads. This manifold has been completely cut open, ported has material added in certain areas. Once welded is media blasted back to the stock finish and you cant even tell its been modified. Same manifold i went 8.7@178 on. SOLD
Prices do not include paypal or shipping
Blox Ek Rear LCA -$60
Fidanza B Series Flywheel-$75
C02 Setup with bottle, regulator, Roll bar mount-SOLD
Jg Victor x 8 injector manifold for gsr heads powder coated black includes the lower fuel rail- $350
3.5" aluminum exhaust for an EK hatch (may fit others) perfect am street cars or mild turbo setups-$200 pick up only will meet if needed
74mm Blox Billet throttle body with VanJen ferrule welded on- SOLD
Golden Eagle b series fuel rail in black(no fittings)-SOLD
Jg Victor x manifold for GSr heads. This manifold has been completely cut open, ported has material added in certain areas. Once welded is media blasted back to the stock finish and you cant even tell its been modified. Same manifold i went 8.7@178 on. SOLD
Last edited by E Town DSM; 11-15-2013 at 11:17 AM. Reason: Pics added
#24
Honda-Tech Member
Join Date: Oct 2011
Location: Denison, TX
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
I am no longer in the Honda game, looking to get rid of all of my stuff.
B Series Solid Avid Motor Mounts (EG/DC/Del Sol) SOLD
Drilled/Slotted Front and Rear rotors $100
Strut Tower Bar $40
Mishimoto Black Intercooler $75
B Series Distributor $150
84mm 9.1:1 JE Pistons BNIB $400
84mm Honda Headgasket $50
2 OBD2 Harnesses (1 cut for tuck) $75 for untouched $50 for cut.
Will ship. 903-486-7114 is quickest to get ahold of me.
Only trades would be for 272 Evo cams, Evo 9 Turbo, Evo pistons.
B Series Solid Avid Motor Mounts (EG/DC/Del Sol) SOLD
Drilled/Slotted Front and Rear rotors $100
Strut Tower Bar $40
Mishimoto Black Intercooler $75
B Series Distributor $150
84mm 9.1:1 JE Pistons BNIB $400
84mm Honda Headgasket $50
2 OBD2 Harnesses (1 cut for tuck) $75 for untouched $50 for cut.
Will ship. 903-486-7114 is quickest to get ahold of me.
Only trades would be for 272 Evo cams, Evo 9 Turbo, Evo pistons.
Last edited by anotherslowEG; 11-07-2013 at 10:36 AM.