New straight axle kit from kens kuston chassis
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: houston, tx, usa
Posts: 2,414
Likes: 0
Received 0 Likes
on
0 Posts
New straight axle kit from kens kuston chassis
#6
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: houston, tx, usa
Posts: 2,414
Likes: 0
Received 0 Likes
on
0 Posts
Re: New straight axle kit from kens kuston chassis (earl)
on there site it says you lose 100 plus lbs with the kit, they also have a spindle mount upgrade. No prices on the site. http://www.kenskustomchassis.com
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: houston, tx, usa
Posts: 2,414
Likes: 0
Received 0 Likes
on
0 Posts
Re: New straight axle kit from kens kuston chassis (Arturbo)
You'd be supprised art. My friend jason who deals alot with trucks and also has an allmotor crx did some research on straight axle and you can get custom length axles from trailer shops, same used on trailers go figure. But I on the other hand am a consumer just tell me what to buy hehe.-pdang
#11
Honda-Tech Member
Re: New straight axle kit from kens kuston chassis (Arturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">Nice. Looks easy to make, or maybe not.</TD></TR></TABLE>
Hello, JimFab? This is....
Hello, JimFab? This is....
#15
Honda-Tech Member
Join Date: Nov 2002
Location: New Cumberland, PA, cumberland
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Re: New straight axle kit from kens kuston chassis (Suprdave)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Suprdave »</TD></TR><TR><TD CLASS="quote">Hah, What's up with the Panhard Bar?
Suprdave</TD></TR></TABLE>
with 8 heim joint ends you need something to take the slop out of axle
Suprdave</TD></TR></TABLE>
with 8 heim joint ends you need something to take the slop out of axle
#16
Re: New straight axle kit from kens kuston chassis (1fstcorrado)
Well thought out.... however 100lbs saved.......hm..
From what i remembered each of the rear stock suspension on a integra without shocks weights around 58 to 60 pounds with the two rear independent rear suspension gone this unit has to weight no more then 20 lbs.....Ive seen the MB straight axle installed with the rear lower K cut and total weight saved was around 68 lbs. I wonder if it made of Aluminum
From what i remembered each of the rear stock suspension on a integra without shocks weights around 58 to 60 pounds with the two rear independent rear suspension gone this unit has to weight no more then 20 lbs.....Ive seen the MB straight axle installed with the rear lower K cut and total weight saved was around 68 lbs. I wonder if it made of Aluminum
#20
Re: New straight axle kit from kens kuston chassis (Robb)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Robb »</TD></TR><TR><TD CLASS="quote">Looks a little over engineered to me. </TD></TR></TABLE>
ditto
ditto
#22
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2002
Location: Woodbridge, NJ, Middlesex
Posts: 5,828
Likes: 0
Received 1 Like
on
1 Post
Re: New straight axle kit from kens kuston chassis (bambooluv)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bambooluv »</TD></TR><TR><TD CLASS="quote">on there site it says you lose 100 plus lbs with the kit, they also have a spindle mount upgrade. No prices on the site. http://www.kenskustomchassis.com</TD></TR></TABLE>
you sure bout the 100 lbs ? cause it has the extra cross bar more than the MB kit and the MB kit saves maybe 80 lbs ... that kit looks nice.
greg
you sure bout the 100 lbs ? cause it has the extra cross bar more than the MB kit and the MB kit saves maybe 80 lbs ... that kit looks nice.
greg
#23
Honda-Tech Member
Join Date: Aug 2002
Location: Yous Bro, NJ
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
Re: New straight axle kit from kens kuston chassis (CHEETAH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CHEETAH »</TD></TR><TR><TD CLASS="quote">
you sure bout the 100 lbs ? cause it has the extra cross bar more than the MB kit and the MB kit saves maybe 80 lbs ... that kit looks nice.
greg</TD></TR></TABLE>
I actually talked to them today, and without me even asking he offered up that it saves about 80lbs
did anyone check out the cage job on the EG that was on the site?
they are about 2 hrs from me, and I am considering getting the same job on mine, does 2500. plus 550 for the wheelie bar seem like a good price? I havent shopped around much yet...
you sure bout the 100 lbs ? cause it has the extra cross bar more than the MB kit and the MB kit saves maybe 80 lbs ... that kit looks nice.
greg</TD></TR></TABLE>
I actually talked to them today, and without me even asking he offered up that it saves about 80lbs
did anyone check out the cage job on the EG that was on the site?
they are about 2 hrs from me, and I am considering getting the same job on mine, does 2500. plus 550 for the wheelie bar seem like a good price? I havent shopped around much yet...
#24
Honda-Tech Member
Join Date: Feb 2001
Location: Boston, MA
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: New straight axle kit from kens kuston chassis (civic disobedience)
Kens is on the more expensive side of cage making, I got a decent deal from him b/c mine was the first eg he did