----May FS Thread----
#78
Re: ----May FS Thread----
Selling because I decided to build a street bike, so my loss your gain!
Located in Southern California, Ontario
Located in Southern California, Ontario
- Race ready 1992 civic rolling chassis K-series ready
- Clean title and 100% straight chassis
- Registration paid up to date and can be used for a street car if you prefer
- Professionally painted inside and out (paid $2,500)
- Full factory glass windows
- Steen Chassis Design & Fabrication - Signal Hill, CA Full-Roll Cage (paid $3,800)
- Chromoly cage setup for NASA Honda Challenge and has NHRA 8.50ET spec for drag racing
- Car will come with factory black wheels
- $4,500 OBO
#80
Honda-Tech Member
Join Date: Jun 2006
Location: Dallas, Texas, United States
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
lenso vpd 13x7.5 M&H 13x8 25 slicks
lenso xpd 15x3.5 M&H 15x3.5 skinnies
Used i have 3 passes on them and before not sure how many passes were made, the slicks might have another season in them.
$1100 obo NOT SEPARATING!!!!! Don't pm and ask about the skinnies cuz they are going as a front and rear set! Together
lenso xpd 15x3.5 M&H 15x3.5 skinnies
Used i have 3 passes on them and before not sure how many passes were made, the slicks might have another season in them.
$1100 obo NOT SEPARATING!!!!! Don't pm and ask about the skinnies cuz they are going as a front and rear set! Together
Last edited by single cam fan; 05-16-2012 at 09:32 AM.
#81
Honda-Tech Member
Join Date: Dec 2003
Location: Somewhere Down Under!!
Posts: 1,918
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
Whats going on fellas.. I am currently selling my built shortblock..I am going a different route on my project car ( k series ).. So here she goes.. Block has not seen past 10 psi and has bout 300 miles on it .. Slap ur head on and turbo kit and ur ready to roll.. Shoot me a text or email if u have question ..Ask for Ike 302 450 6966.. or sickhb2003@yahoo.com
85 mm rs sleeved Gsr shortblock
Srs probe pistons 9.3:1
Probe I beam rods ,
arp rod bolts
Acl bearing
Arp head studs
Polished Gsr crank
Oem water pump
Oem oil pump
Balanced/Blueprinted/Hot-tanked
Looking for 2500 obo .
85 mm rs sleeved Gsr shortblock
Srs probe pistons 9.3:1
Probe I beam rods ,
arp rod bolts
Acl bearing
Arp head studs
Polished Gsr crank
Oem water pump
Oem oil pump
Balanced/Blueprinted/Hot-tanked
Looking for 2500 obo .
#83
Re: ----May FS Thread----
Name: Jeff
Location: Winchester
Means of contact: Call text 5404507305
Price: $3500 obo
Chassis Only with Exospeed 3 Piece Front End
25.5 SFI Rollcage
Also have the turbo setup for the car which can go for an extra $2000.00
Full Build Forum
https://honda-tech.com/forums/showth...ngine+dynamics
Location: Winchester
Means of contact: Call text 5404507305
Price: $3500 obo
Chassis Only with Exospeed 3 Piece Front End
25.5 SFI Rollcage
Also have the turbo setup for the car which can go for an extra $2000.00
Full Build Forum
https://honda-tech.com/forums/showth...ngine+dynamics
Last edited by CNCEngDynamics; 05-17-2012 at 11:10 AM.
#84
Honda-Tech Member
Join Date: Jun 2006
Location: knockin boots in, Ohiooooo, USA
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
***In stock blowout*** ALL OBO
D16y ARP head studs (BNIB)-$110
D16y Head gasket (BNIB)-$60
D series ported skunk 2 intake manifold-$250
90-91 b series comp clutch stg 4 (BNIB)-$300
B18a ARP head studs (BNIB)-$140
b16 ported intake OE manifold- $200
b18c manly rods (BNIB)-sold
Renown oil Catch tank (6 bungs) (BNIB)-$275
k20z3 skunk2 Composite fuel rail BNIB-$190
JDM ITR armrest delete-$75
JDM personal box-$50
B series starter-$75
B series Alt-$75
P73 port match intake manifold- $150
koyo half radiator (off shop car)-Pending
PTE 750hp Intercooler (off shop car)-$350
greddy profect II (off shop car)- $200
nissan 240sx adjustable tension rods- $80
Tucked b series obd1 engine harness - $250 obo
PM or txt
763-772-7592
D16y ARP head studs (BNIB)-$110
D16y Head gasket (BNIB)-$60
D series ported skunk 2 intake manifold-$250
90-91 b series comp clutch stg 4 (BNIB)-$300
B18a ARP head studs (BNIB)-$140
b16 ported intake OE manifold- $200
b18c manly rods (BNIB)-sold
Renown oil Catch tank (6 bungs) (BNIB)-$275
k20z3 skunk2 Composite fuel rail BNIB-$190
JDM ITR armrest delete-$75
JDM personal box-$50
B series starter-$75
B series Alt-$75
P73 port match intake manifold- $150
koyo half radiator (off shop car)-Pending
PTE 750hp Intercooler (off shop car)-$350
greddy profect II (off shop car)- $200
nissan 240sx adjustable tension rods- $80
Tucked b series obd1 engine harness - $250 obo
PM or txt
763-772-7592
#85
Honda-Tech Member
Join Date: Mar 2004
Location: Denver, co, usa
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
Oaks Racing Prelude H22 All Parts For Sale!!
All parts are listed on the CarDomain site on pages 18 & 19
www.cardomain.com/id/oaksracing
I can send additional pictures to interested parties -
All parts are listed on the CarDomain site on pages 18 & 19
www.cardomain.com/id/oaksracing
I can send additional pictures to interested parties -
#86
I'm really 2slow
Re: ----May FS Thread----
AEM 3.5bar MAP sensor with pigtail. $80 shipped.
PWM boost control solenoid. New! $50 shipped.
Bullseye power S372r turbo.Comes with downpipe clamp. New. $1250 shipped.
Cell # 831 359 0477
PWM boost control solenoid. New! $50 shipped.
Bullseye power S372r turbo.Comes with downpipe clamp. New. $1250 shipped.
Cell # 831 359 0477
#87
Honda-Tech Member
Join Date: Apr 2006
Location: CT, USA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
for sale all parts are brand new never used some have been fitted need this stuff gone asap prefer local ct,ny,nj areas (will ship at buyers cost)..fastest contact email xredline2@aol.com
full-race T4 twinscroll sidewinder with dual mv-s 38mm wastegate flanges SOLD
full-race dual back door race intercooler core 24.5x12x4.5 SOLD
k-tuned pro-1000 fuel rail $150
karcepts 36mm swap hubs $250
full-race T4 twinscroll sidewinder with dual mv-s 38mm wastegate flanges SOLD
full-race dual back door race intercooler core 24.5x12x4.5 SOLD
k-tuned pro-1000 fuel rail $150
karcepts 36mm swap hubs $250
Last edited by XREDLINE2; 05-22-2012 at 01:09 PM.
#89
Honda-Tech Member
Join Date: Oct 2008
Location: boostville, nj, usa
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
red recaro DC5 seats with ek seat rails from pasword jdm seats are mint
$1500 $1200 with no seat rails price is not with shipping
text only if uwant to buy the seats (856) 305-5933
$1500 $1200 with no seat rails price is not with shipping
text only if uwant to buy the seats (856) 305-5933
#91
Honda-Tech Member
Join Date: Sep 2002
Location: Team SpeedTrix, Ca, USA
Posts: 6,332
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
$1500 obo takes it all prices do not include shipping and paypal
-h22 Hytech turbo manifold t4 divided egt bungs on all 4 runners $900
-pwr barrel intercooler 3 inlet and outlet $500
-5 gal alumimum tank with -10 bungs $150
-electric water pump $75
-h22 Hytech turbo manifold t4 divided egt bungs on all 4 runners $900
-pwr barrel intercooler 3 inlet and outlet $500
-5 gal alumimum tank with -10 bungs $150
-electric water pump $75
#92
Honda-Tech Member
Join Date: Nov 2010
Location: new jersey
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
412SB34 cnc staging brake inline type. comes with jegs prop valve . brand new just installed and removed .110 shipped
sold sold sold
sold sold sold
Last edited by Mr1835; 05-22-2012 at 07:17 PM.
#93
Re: ----May FS Thread----
FS:
Full b20 vtec short block set up
B20b block w/caps-$100
2- ls/b20 cranks-sold
New Acl rod/main/thrust bearings for LS/B20-$120
New Eagle LS rods-sold
New 85mm wiseco pistons +2cc dome -$425
New Golden eagle 85mm ls vtec kit -$210
Bnib Arp gsr head studs -$120
bnib Super tech valvetrain -$280
Bnib gsr water pump-$60
Bnib gsr timing belt -$60
Bnib gsr/ITR oil pump -$90
Buying a zo6 so no need to mod my DD anymore
Pm me or call text 3017301003
Full b20 vtec short block set up
B20b block w/caps-$100
2- ls/b20 cranks-sold
New Acl rod/main/thrust bearings for LS/B20-$120
New Eagle LS rods-sold
New 85mm wiseco pistons +2cc dome -$425
New Golden eagle 85mm ls vtec kit -$210
Bnib Arp gsr head studs -$120
bnib Super tech valvetrain -$280
Bnib gsr water pump-$60
Bnib gsr timing belt -$60
Bnib gsr/ITR oil pump -$90
Buying a zo6 so no need to mod my DD anymore
Pm me or call text 3017301003
Last edited by BMo Tuning; 05-25-2012 at 10:51 AM.
#94
Honda-Tech Member
iTrader: (2)
Re: ----May FS Thread----
couple things forsale
complete aeromotive fuel system. 550$ shipped
precision 1600cc injectors,fjo driver and complete harness to plug into pass shock tower plug. NO wiring needed other than a power and ground to the fjo box. 450$ shipped
hondata s300, just like the pick for 400$ or in a ecu w/pwm control for 550$
for 575$ i will even throw in a boost soleniod
complete upr front subframe,springs,coil overs and lower control arms for a 79-93 mustang 1170$ on there website. 600$ takes it all!
rear mustang anti roll bar around the same years 250$
all upr stuff is brand new. buyer stiffed me
93 hatch, lots of work put into this chassis. 8 point cromoly cage,shaved engine bay( not finished) i found out real quick i hate body work! has rust on rear quarters,left rocker,and left rear behind bumper were quarter ties into rear of car. i have a ton of pics of car i can email. i have damn near every single interier and exterier peice for this car. i built the cage around the interior. it all fits. 650$ takes everything i have for this car. MUST PICK UP!
i live in eastern north carolina. 1hr east of reliegh and 2hrs south of va beach for ref.
I have 1 used drivers side avid tq mount. (not the one in pic) 40$
used simpson chute w/chute pack mount. will need to buy or make mount 250$
the loop at end of chute spring pad is missing. you will need to make something to get chute to stay in chute bag.
set of weld magnum imports,13x8 w/tires.24.5x9x13.m/t slicks off tgr hatch,10-14 hits700$
dss b series 2.9's axles. one side just rebuilt. 500$
b16 eagle crank. only dyno time. 350$
box full of honda ecu chipping supplies. well over 500$ worth of chips,sockets,vtec parts,pwm,knock boards, several ecus, make me a offer.
i cant add anymore pics so pm me your number and i can send as many as you need.
this list will keep growing...im cleaning house!
complete aeromotive fuel system. 550$ shipped
precision 1600cc injectors,fjo driver and complete harness to plug into pass shock tower plug. NO wiring needed other than a power and ground to the fjo box. 450$ shipped
hondata s300, just like the pick for 400$ or in a ecu w/pwm control for 550$
for 575$ i will even throw in a boost soleniod
complete upr front subframe,springs,coil overs and lower control arms for a 79-93 mustang 1170$ on there website. 600$ takes it all!
rear mustang anti roll bar around the same years 250$
all upr stuff is brand new. buyer stiffed me
93 hatch, lots of work put into this chassis. 8 point cromoly cage,shaved engine bay( not finished) i found out real quick i hate body work! has rust on rear quarters,left rocker,and left rear behind bumper were quarter ties into rear of car. i have a ton of pics of car i can email. i have damn near every single interier and exterier peice for this car. i built the cage around the interior. it all fits. 650$ takes everything i have for this car. MUST PICK UP!
i live in eastern north carolina. 1hr east of reliegh and 2hrs south of va beach for ref.
I have 1 used drivers side avid tq mount. (not the one in pic) 40$
used simpson chute w/chute pack mount. will need to buy or make mount 250$
the loop at end of chute spring pad is missing. you will need to make something to get chute to stay in chute bag.
set of weld magnum imports,13x8 w/tires.24.5x9x13.m/t slicks off tgr hatch,10-14 hits700$
dss b series 2.9's axles. one side just rebuilt. 500$
b16 eagle crank. only dyno time. 350$
box full of honda ecu chipping supplies. well over 500$ worth of chips,sockets,vtec parts,pwm,knock boards, several ecus, make me a offer.
i cant add anymore pics so pm me your number and i can send as many as you need.
this list will keep growing...im cleaning house!
Last edited by 061000rr; 05-24-2012 at 06:34 AM.
#95
Honda-Tech Member
Join Date: Mar 2006
Location: Kato
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Re: ----May FS Thread----
Bought these locally w/ some exospeed vpd and decided that they might be on the small side for my setup. They are barely used and they still have LOTS of life left in them. looking to get 250.00 for the set. Pm is key, Thanks.
#100
Honda-Tech Member
Re: ----May FS Thread----
Name: Darryl
Location: NOVA
Means of contact: d_baker3@hotmail.com (email me for a quicker reply)
Price: $65 shipped
Description: I'm getting rid of my custom catch can now since I am running a closed PCV setup now. I purchased it from Blueridge Motorspor ts http://www.carolinahondas.com/blueri...240sx-s14.html
The catch can come with two 90 degree 10-AN fittings, two 180 degree 10-AN fittings, two SS lines (enough to run from the valve cover to coolant reservoir on a CRX), a 10-AN wrench, a 10-AN Koul Tool, and a filter.
Pictures:
How I had it mounted
Location: NOVA
Means of contact: d_baker3@hotmail.com (email me for a quicker reply)
Price: $65 shipped
Description: I'm getting rid of my custom catch can now since I am running a closed PCV setup now. I purchased it from Blueridge Motorspor ts http://www.carolinahondas.com/blueri...240sx-s14.html
The catch can come with two 90 degree 10-AN fittings, two 180 degree 10-AN fittings, two SS lines (enough to run from the valve cover to coolant reservoir on a CRX), a 10-AN wrench, a 10-AN Koul Tool, and a filter.
Pictures:
How I had it mounted