March FS thread
#52
Honda-Tech Member
Re: March FS thread
PPG Honda S2000 Complete 1st-6th Dog Box complete gear set!
***From 1st, 2nd, 3rd & 4th are BRAND NEW, the only ones used are 5th & 6th
SOLD SOLD SOLD!!!
Include:
PPG 1st-6th Dog Box gear set
Ratios: 3.16 / 2.09 / 1.53 / 1.22 / 1.04 / 0.88
Horsepower Rating: 1000 whp
The price for a BRAND NEW for the gears only is $9,350
For more info email @ bebo@kingsperformance.com
Fernando @ Kings Performance
***From 1st, 2nd, 3rd & 4th are BRAND NEW, the only ones used are 5th & 6th
SOLD SOLD SOLD!!!
Include:
PPG 1st-6th Dog Box gear set
Ratios: 3.16 / 2.09 / 1.53 / 1.22 / 1.04 / 0.88
Horsepower Rating: 1000 whp
The price for a BRAND NEW for the gears only is $9,350
For more info email @ bebo@kingsperformance.com
Fernando @ Kings Performance
Last edited by Kings Performance; 03-30-2011 at 06:00 PM. Reason: SOLD
#53
Honda-Tech Member
Join Date: Oct 2002
Location: pittsburg ca (925)
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
for sale used comp twin disk clutch for b-series tranny.only in the dyno and 6 pass in the track on a allmotor set up.will come with the original box,tb and flywheel bolts.part#tw-8026-b
900 shipped plus paypal fee
900 shipped plus paypal fee
#54
Honda-Tech Member
iTrader: (1)
Re: March FS thread
Well I have decided that my priorities are changing and as close as it is to being done and everything I need to put my money elsewhere, so I'm getting rid of everything.
email = Sjlutwyche@hotmail.com
phone = 914 382 4163
Almost all Parts are brand new and Only have minimal Dyno Time
All Parts are from a 1999 Civic si
This stuff is priced to sell. get it gone
Turbo Kit $3200
Manifold,Downpipe,Dumptube $800
Custom Inline Pro Manifold T4/60mm $400
4 Inch Downpipe to 5 Inch muffler(exit under halfway near shift linkage) $300
Tial 60mm Wastegate $500
Borg Warner s368 .96 Hot side 1.10 Cold Side $1000
2.5" Dumptube $100
T1 1000hp Backdoor Intercooler (V Band Passenger Side) $900
3" Aluminum Intercooler Piping w/ Tial 50mm Blow Off Valve $350 FIRM
Motor 3000 FIRM
Block
85x87.2 Dart standard deck
8.7:1 Ross Pistons
Oem Gsr Crankshaft
Eagle H Beam Rods
Arp 2000 Rod Bolts
Arp Main Studs
Arp Flywheel bolts
Arp Pressure Plate bolts
Arp Head Studs
Type r water pump
Type r oil pump with Prodrive oil pump gears
Moroso 5qt oil pan with gsr pickup
Cometic Headgasket
Acl Rod and Main Bearings
Fluidamp Race Version $250
900
1989 B16 head Stock Port, Stock Lmas etc
Ferrea Valves, Springs, Keepers, Retainers, Lockers
Skunk 2 Covered Vtec solenoid $80
Electronics
Custom Chasebay's Milspec Connector Harness w/ FJO Injector $800Firm
Msd Pro Cap on Oem b16 Distributor $150
Msd Digital 6 ignition Box $175
Msd hvc 2 Coil $100
Misc
Vision Hood Props $120
Vibrant Extra Tensioner - $150
Mishimoto Rad Hoses b16 $50
Spoon Carbon Kevlar Spark Plug Cover - $120 FIRM
Dss 5.9 - 1000 for axles 1200 for axles with hubs and studs
Full Race Pro Am Traction Bar - $300 FIRM
Gsr Transmission 75k NO ISSUES $600 w/oem diff (MFactory currently installed)
Mfactory Plate Lsd $700
Transmission with LSD $1100
24.5x9x13 Mickey Thompson ET Slicks 50% tread left about 15 passes on them - $150 firm
Omni Power 12k 18k Full Drag $800 FIRM
Skunk2 Triple Seal Cam Seal - $20
B&M Fuel Pressure Gauge - $25
Password JDM Radiator Stay - $20
Honda OEM B Series Starter - $50 (Full Working Order)
Mr. Gasket Copper Exhaust Manifold Gasket - $15
email = Sjlutwyche@hotmail.com
phone = 914 382 4163
Almost all Parts are brand new and Only have minimal Dyno Time
All Parts are from a 1999 Civic si
This stuff is priced to sell. get it gone
Turbo Kit $3200
Manifold,Downpipe,Dumptube $800
Custom Inline Pro Manifold T4/60mm $400
4 Inch Downpipe to 5 Inch muffler(exit under halfway near shift linkage) $300
Tial 60mm Wastegate $500
Borg Warner s368 .96 Hot side 1.10 Cold Side $1000
2.5" Dumptube $100
T1 1000hp Backdoor Intercooler (V Band Passenger Side) $900
3" Aluminum Intercooler Piping w/ Tial 50mm Blow Off Valve $350 FIRM
Motor 3000 FIRM
Block
85x87.2 Dart standard deck
8.7:1 Ross Pistons
Oem Gsr Crankshaft
Eagle H Beam Rods
Arp 2000 Rod Bolts
Arp Main Studs
Arp Flywheel bolts
Arp Pressure Plate bolts
Arp Head Studs
Type r water pump
Type r oil pump with Prodrive oil pump gears
Moroso 5qt oil pan with gsr pickup
Cometic Headgasket
Acl Rod and Main Bearings
Fluidamp Race Version $250
900
1989 B16 head Stock Port, Stock Lmas etc
Ferrea Valves, Springs, Keepers, Retainers, Lockers
Skunk 2 Covered Vtec solenoid $80
Electronics
Custom Chasebay's Milspec Connector Harness w/ FJO Injector $800Firm
Msd Pro Cap on Oem b16 Distributor $150
Msd Digital 6 ignition Box $175
Msd hvc 2 Coil $100
Misc
Vision Hood Props $120
Vibrant Extra Tensioner - $150
Mishimoto Rad Hoses b16 $50
Spoon Carbon Kevlar Spark Plug Cover - $120 FIRM
Dss 5.9 - 1000 for axles 1200 for axles with hubs and studs
Full Race Pro Am Traction Bar - $300 FIRM
Gsr Transmission 75k NO ISSUES $600 w/oem diff (MFactory currently installed)
Mfactory Plate Lsd $700
Transmission with LSD $1100
24.5x9x13 Mickey Thompson ET Slicks 50% tread left about 15 passes on them - $150 firm
Omni Power 12k 18k Full Drag $800 FIRM
Skunk2 Triple Seal Cam Seal - $20
B&M Fuel Pressure Gauge - $25
Password JDM Radiator Stay - $20
Honda OEM B Series Starter - $50 (Full Working Order)
Mr. Gasket Copper Exhaust Manifold Gasket - $15
#56
Honda-Tech Member
Join Date: Aug 2001
Location: Piscataway, NJ, USA
Posts: 805
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
SOLD!!!
Exospeed EG Front End. Brand New. $775 Firm. Pick up only. It's located at Dynamic Performance in NJ. Call or text on my cell 732-991-1487 or at the shop 908-393-5086.
Shop info: www.dpracingnj.com
Exospeed EG Front End. Brand New. $775 Firm. Pick up only. It's located at Dynamic Performance in NJ. Call or text on my cell 732-991-1487 or at the shop 908-393-5086.
Shop info: www.dpracingnj.com
Last edited by FIxALPHA; 03-12-2011 at 08:45 AM. Reason: sold
#58
Honda-Tech Member
Join Date: Sep 2004
Location: stanton, ca, usa
Posts: 2,693
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
NEW b series hand cuffs, No mods needed to install, that means u DONT have to shave the case, Just bolt in and save your stock tranny from high HORSE POWER motors, ask breeze he gots one.
Call David @ 714-878-5008
COST: 199.99 per set. Brand NEW
FREE SHIPPING
http://www.ipgparts.net/store/images/D/cnccuff1.jpg
Call David @ 714-878-5008
COST: 199.99 per set. Brand NEW
FREE SHIPPING
http://www.ipgparts.net/store/images/D/cnccuff1.jpg
Last edited by gofastcrx; 03-12-2011 at 11:14 AM.
#64
Honda-Tech Member
Join Date: Jan 2008
Location: Chesapeake, VA, United States
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
Selling enerything off the racecar. Time to buy a house and spend time with my Family.
So here is everything i have. PM me for pics if interested. These prices are cheap so jump on them I want this stuff gone. My name is Coffey if you have any questions thanks for looking.
Full-Race Traction Bars $200
AEM Injector Driver 150$
ATI Damperner Pulley $ 250
RLZ Head with full REV valvetrain $900
So here is everything i have. PM me for pics if interested. These prices are cheap so jump on them I want this stuff gone. My name is Coffey if you have any questions thanks for looking.
Full-Race Traction Bars $200
AEM Injector Driver 150$
ATI Damperner Pulley $ 250
RLZ Head with full REV valvetrain $900
Last edited by Coffey; 03-22-2011 at 04:37 PM.
#65
Honda-Tech Member
Join Date: Mar 2002
Location: Crofton, Md, USA
Posts: 2,459
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
pretty much brand new Brian Crower with arp 625 bolts..3 passes and 8 dyno pulls... 350.00 obo plus shipping.... please email me at jhunt10452@aol.com
Last edited by littlebluecrx; 03-26-2011 at 10:17 AM.
#66
Honda-Tech Member
Join Date: Jan 2004
Location: Frederick, MD, USA
Posts: 1,894
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
FS: V2 Competition wheels 13x8 (Black) w/ M&T slicks 24.5x9-13
Entire setup has 5 total burn-outs/passes on them. These are practically new, and the total for everything together was $728.00 new/plus shipping. I am willing to take $615.00 together for everything. I am also willing to seperate if need-be..here are the prices for all 3 options..
Package (Wheels and Slicks) = $615.00
Slicks alone = $315.00
Wheels alone = $300.00
Entire setup has 5 total burn-outs/passes on them. These are practically new, and the total for everything together was $728.00 new/plus shipping. I am willing to take $615.00 together for everything. I am also willing to seperate if need-be..here are the prices for all 3 options..
Package (Wheels and Slicks) = $615.00
Slicks alone = $315.00
Wheels alone = $300.00
#67
Honda-Tech Member
Join Date: Jan 2003
Location: 41°39′10″N 72°23′29″W, Connecticut
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
24 Ft Pace Limited Edition Enclosed Trailer - $6000 OBO. Comes with Superwinch 3500 powered by Optima Battery, Moduline Aluminum Fold out table, Moduline Dual Fuel bins, Jack Holder and aluminum Trailer door Bin. Brand new Spare tire/Rim. Brand new Brake assemblies all around. Interior is furnished. Aluminum Wheels, Fire Extinguisher. 3ft Etrack system. 4 x Interior lighting.
Last edited by TheWickedOne; 03-21-2011 at 04:45 AM.
#68
Re: March FS thread
t3/67 HO, BNIB never ran or bolted to a manifold...$900
PTE GT35-few dyno sessions, dozen track runs
BNIB V2 comp wheels 13x8 front, 15x3 rear(have 24x3.6x15 m&h tires(brand new) $850
lenso VPD 13x7.5 front, XPD 15x3 rear(have 24x3.6x15 m&h tires(basically new) $850
A1000 fuel pump $250
A1000 FPR -10 in/-6return $100
8gal jaz cell $100
PTE 825hp intercooler $400
FIC 1000cc injectors $250
microtech lt10 EMS(comes with all needed, msd coil, etc) $850
PTE GT35-few dyno sessions, dozen track runs
BNIB V2 comp wheels 13x8 front, 15x3 rear(have 24x3.6x15 m&h tires(brand new) $850
lenso VPD 13x7.5 front, XPD 15x3 rear(have 24x3.6x15 m&h tires(basically new) $850
A1000 fuel pump $250
A1000 FPR -10 in/-6return $100
8gal jaz cell $100
PTE 825hp intercooler $400
FIC 1000cc injectors $250
microtech lt10 EMS(comes with all needed, msd coil, etc) $850
#70
Honda-Tech Member
Re: March FS thread
Location: Miami Lakes, FL
Contact: 305-989-7065 or 786-380-5511
Lightly used Skunk2 pro 1 series cams $450 OBO + shipping + PAYPAL fees
(Used for about 5 dyno pulls..only a month old!)
EMAIL: tpupo88@yahoo.com
Please no lowballers!
Contact: 305-989-7065 or 786-380-5511
Lightly used Skunk2 pro 1 series cams $450 OBO + shipping + PAYPAL fees
(Used for about 5 dyno pulls..only a month old!)
EMAIL: tpupo88@yahoo.com
Please no lowballers!
#71
Re: March FS thread
Okay its time to get rid of the shell
its a 93 VX *clean Mississippi Title*
Shell includes
-10PT nhra spec Cromolly Cage
-Kirkey aluminum Race seat
-3 gallon water cell Mounted in rear (removable)
-BWR t1 style oil catch can mounted (remov) in oem battery location
-Blox drag Coilovers 12k front 18k rear
-hardrace front lower control arms and front Camber kit
-blox rear lower control arms
-ETD traction bar kit
it is gutted right now with only the dash and front door panels in. i have the interior still except the carpet. its blue interior.
I have all the original wiring still, engine harness, cabin harness etc
Does not have a fuel tank and will need a radiator support to make street legal again
Shell has never been down the track.. it has been sitting for about 2 months since cage was done. Still needs to be painted. Iv been keeping wd40 on the cage to prevent alot of surface rust. My funds ran low and i lost interest is the reason for selling the shell.
* Im asking $2000* but you can make me any offer. I need to get rid of it... just taking up space
Okay i still have a few items for sale from the partial build
PR3 Itr head $400+shipping
P72 gsr head $200+ shipping
MSD distributer + msd blaster cap combo $400 shipped
ITR usdm cams w/t aem cam gears $300+shipping
Red valvecover w/t aem cover $95 shipped
PM me for info
its a 93 VX *clean Mississippi Title*
Shell includes
-10PT nhra spec Cromolly Cage
-Kirkey aluminum Race seat
-3 gallon water cell Mounted in rear (removable)
-BWR t1 style oil catch can mounted (remov) in oem battery location
-Blox drag Coilovers 12k front 18k rear
-hardrace front lower control arms and front Camber kit
-blox rear lower control arms
-ETD traction bar kit
it is gutted right now with only the dash and front door panels in. i have the interior still except the carpet. its blue interior.
I have all the original wiring still, engine harness, cabin harness etc
Does not have a fuel tank and will need a radiator support to make street legal again
Shell has never been down the track.. it has been sitting for about 2 months since cage was done. Still needs to be painted. Iv been keeping wd40 on the cage to prevent alot of surface rust. My funds ran low and i lost interest is the reason for selling the shell.
* Im asking $2000* but you can make me any offer. I need to get rid of it... just taking up space
Okay i still have a few items for sale from the partial build
PR3 Itr head $400+shipping
P72 gsr head $200+ shipping
MSD distributer + msd blaster cap combo $400 shipped
ITR usdm cams w/t aem cam gears $300+shipping
Red valvecover w/t aem cover $95 shipped
PM me for info
#72
Re: March FS thread
driveshaft shop 2.9 b-series axles. asking 700 BNIB
wilwood civic brake kit. COMPLETE. asking 650 BNIB
precision 6765 t3 .82 ported s 4 bolt. asking 1100 BNIB
m&w plug and play harness. asking 500 USED
k20 cp pistons 9.0:1 86mm with carrillo a-beams. asking 1000 BNIB
wiseco k24 9.0:1 asking 450 BNIB
k20 supertech dual valve springs and retainers. asking 300 BNIB
ferrea dual springs and seats. taking offers USED
k20 t3 log manifold 8mm wastegate. asking 200 BNIB
1600cc injectors asking 500 BNIB
innovate k into ek motor mount brackets only. asking $50 BNIB
weldon feul pump. 2025 -8in and -8 out. asking $695 BNIB
b-series coils from 600cc motorcycle. comes with all the hardware to install. asking $100 for all 4!! BNIB
hasport k into eg solid motor mounts. asking $400 USED
no pics yet.
wilwood civic brake kit. COMPLETE. asking 650 BNIB
precision 6765 t3 .82 ported s 4 bolt. asking 1100 BNIB
m&w plug and play harness. asking 500 USED
k20 cp pistons 9.0:1 86mm with carrillo a-beams. asking 1000 BNIB
wiseco k24 9.0:1 asking 450 BNIB
k20 supertech dual valve springs and retainers. asking 300 BNIB
ferrea dual springs and seats. taking offers USED
k20 t3 log manifold 8mm wastegate. asking 200 BNIB
1600cc injectors asking 500 BNIB
innovate k into ek motor mount brackets only. asking $50 BNIB
weldon feul pump. 2025 -8in and -8 out. asking $695 BNIB
b-series coils from 600cc motorcycle. comes with all the hardware to install. asking $100 for all 4!! BNIB
hasport k into eg solid motor mounts. asking $400 USED
no pics yet.
Last edited by sfljdmbb6; 03-29-2011 at 11:50 AM.
#73
Honda-Tech Member
Join Date: Nov 2006
Location: BRAMPTON, ONTARIO, CANADA
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
Looking to get out of game for a little bit to persue other interests so the All Motor beast must go..would like to go to good home
Brief info
best e.t 10.58@129mph
Allen Built (Inline Pro) stroked k20
custom piston & rod with k24 crank
Allen Built (Inline Pro) race ported k20 head with Drag Cartel cams
Excessive ported intake manifold with v-stack's using 90mm mustang throttle body
like i said thats just a little brief summary all work and install done by Inline Pro and tuned by Brian Fisher, car is crazy fast and has run up against the best all motor cars in the country and has been very competitve with the right driver... would like to sell complete with 18ft car hauler
Curently Canada's fastest Motor Street Car
Serious inquires only
message me for details
Brief info
best e.t 10.58@129mph
Allen Built (Inline Pro) stroked k20
custom piston & rod with k24 crank
Allen Built (Inline Pro) race ported k20 head with Drag Cartel cams
Excessive ported intake manifold with v-stack's using 90mm mustang throttle body
like i said thats just a little brief summary all work and install done by Inline Pro and tuned by Brian Fisher, car is crazy fast and has run up against the best all motor cars in the country and has been very competitve with the right driver... would like to sell complete with 18ft car hauler
Curently Canada's fastest Motor Street Car
Serious inquires only
message me for details
#74
Honda-Tech Member
Join Date: Sep 2002
Location: Team SpeedTrix, Ca, USA
Posts: 6,332
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
-H22\h23
Turbo pistons are 9:1 87.5 bore arias pistons brand new in the box $400
All motor 12.5:1 87 bore arias pistons brand new in the box $400
Comes with rings locks and wrist pins
-brand new FJO injector driver $185 shipped
-1600 cc injectors $275 shipped
-h22 109 stroker setup
109mm stroke crank, Cunningham rods, ross 90mm pistons $2000
-All parts are new never used. I have a 109 stroker kit for sale needs to be used with a deck plate and I dont know what size. Consists of a crank redone by castillos 109 mm stroke with Cunningham all motor light weight rods and ross 90 mm pistons with total seal piston rings. $2000 plus shipping
Turbo pistons are 9:1 87.5 bore arias pistons brand new in the box $400
All motor 12.5:1 87 bore arias pistons brand new in the box $400
Comes with rings locks and wrist pins
-brand new FJO injector driver $185 shipped
-1600 cc injectors $275 shipped
-h22 109 stroker setup
109mm stroke crank, Cunningham rods, ross 90mm pistons $2000
-All parts are new never used. I have a 109 stroker kit for sale needs to be used with a deck plate and I dont know what size. Consists of a crank redone by castillos 109 mm stroke with Cunningham all motor light weight rods and ross 90 mm pistons with total seal piston rings. $2000 plus shipping
Last edited by DxTrix; 03-15-2011 at 11:57 PM.