Finally ran my first 9 second passes
03-27-2014, 11:49 AM
#103
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
The a1 studs are of the same design just better material. There has tone a certain way to install them and not have that issue but I may switch to arp studs. What ever my engine builder recommends I will run.
11-11-2014, 05:13 PM
#104
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
UPDATE
Clicked off a 9.66 @154 mph over the weekend at Import Face Off against a 10.0 GTR Had a great weekend after breaking both axles we took the win on some Oreilly Auto axles.
New full length video will be up in a few days this is the final run from the stands.
Clicked off a 9.66 @154 mph over the weekend at Import Face Off against a 10.0 GTR Had a great weekend after breaking both axles we took the win on some Oreilly Auto axles.
New full length video will be up in a few days this is the final run from the stands.
11-12-2014, 02:33 PM
#107
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
Thank you yeah the welds are wayyy nicer
Car is still on Hondata S300 with CPR. We had some issues with the AEM V2 and decided to stick with the hondata for remainder of the season.
Car is still on Hondata S300 with CPR. We had some issues with the AEM V2 and decided to stick with the hondata for remainder of the season.
11-13-2014, 04:14 AM
#108
Honda-Tech Member
Re: Finally ran my first 9 second passes
What type of issues? I'm still on the fence about making the jump from S300 to AEM V2 as well. Money is basically the other limiting factor as of now
11-13-2014, 09:35 AM
#109
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
Coil driver 2 was bad. It's repaired but the car is doing well on the s300 for the time being
11-13-2014, 05:48 PM
#112
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
Very little spin in first gear and dead hooking second gear and up
We broke the Insane shafts axles. Both are being replaced and old ones going back to Mike for inspection. We got a lot of hard passes out of those axles. We had to limp it all day on the oreilly axles and only hit it hard off the line this last pass and ran the 9.66
We broke the Insane shafts axles. Both are being replaced and old ones going back to Mike for inspection. We got a lot of hard passes out of those axles. We had to limp it all day on the oreilly axles and only hit it hard off the line this last pass and ran the 9.66
11-14-2014, 01:20 PM
#114
Honda-Tech Member
Join Date: Nov 2011
Location: FRANCE
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
Nice vid!
Broke one insane axle passager on start line, just switched to DSS 5.9
Send back to Mike for inspection, he sent me back a brand new hub.
Where are axle brake?
How many rpm and how Much boost are you lauching ?
Broke one insane axle passager on start line, just switched to DSS 5.9
Send back to Mike for inspection, he sent me back a brand new hub.
Where are axle brake?
How many rpm and how Much boost are you lauching ?
Last edited by Steeve_Civic; 11-14-2014 at 01:38 PM.
11-14-2014, 03:17 PM
#115
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
We broke the inner joints on both axles. They had to be hurt from the previous race.
Were launching around 6500 8-9 psi boost
Were launching around 6500 8-9 psi boost
11-14-2014, 08:24 PM
#116
Honda-Tech Member
Join Date: Mar 2012
Location: Auckland, New Zealand
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
Awesome video! So much nicer to watch than some of the 'professional' videos.
Cars sound so much cooler when you're standing at the finish line too.
Bummer about the Insane Shafts - although you say they had a hard life....
Cars sound so much cooler when you're standing at the finish line too.
Bummer about the Insane Shafts - although you say they had a hard life....
12-09-2014, 07:16 PM
#117
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
Second place in Vegas this weekend. We had a great time. Ran a 9.68 9.76 was on my PB pass in the finals and lost 4th gear ran 9.88@129. Stuck in Van Horn Texas waiting on parts for my truck. Lost the wheel bearings and welded the hub to the spindle lol 600 miles from home stuck in a hotel for couple days.
12-10-2014, 09:40 AM
#122
Honda-Tech Member
Join Date: Apr 2006
Location: Colorado Springs, CO, USA
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
Car looks great and seems like a lot of fun. Reminds me of the T1 Integra when it was still red. Good work
12-18-2014, 09:42 AM
#125
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally ran my first 9 second passes
Yes only a 6 point cage currently.
It's stock GSR transmission with Mfactory LSD and handcuff. Stock final drive too.
It's stock GSR transmission with Mfactory LSD and handcuff. Stock final drive too.