ahobbs

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good.

tepid1

$450 Prologger Wideband/Boost datalogger and controller (new)



Wires are terminated to the terminal strip and unit was mounted via velcro.

$50 Flaming River battery cut switch


The best battery cutoff out there. Period.

$750 AFI Intercooler 24x12x3.5 garrett core (basically new)





Setup for wiggins clamps, but regular hose and clamps work too.

$725 NLR AMS-1000 boost controller



Comes with everything as if it were brand new.


$475 (ONE) Weld Racing one piece 15x3.5 skinny - polished (new)


$475 (ONE) Weld Racing one piece 15x3.5 skinny - gold (new)

sgnlab

Stuff Left Over from my civic
Hondata S300 Obd2a With PWM and Solenoid Retails for $990
Selling for SOLD!!!


Wilwood Brake Booster Retails for $135 Shipped
Selling for SOLD!!!

Avid Racing Solid B series into EK mounts Retails for $300+
Selling for $250



Garrett 24" x 12" x 4.5" IC custom built tanks with center to center feed endtanks has Hargett Clamps IC like this sells for over $1,000
I will sell it with both hargett clamps for $750.00




I also have a obd1 Hondata chipped ECU just missing a Hondata S300 board $150.00
3" Aluminum Charge Pipes for ek b series with fullrace/peakboost top mount $200
Shipping and 3% paypal extra!

SpeedSceneScott

THIS CAR IS SUPER LIGHT!
CRX drag car, 1991 with three K motors, tranny and tons of parts.
(motors are stock, one is complete and running, two are disassembled complete missing one head) Motor and trans and clutch is in the car.
Fiberglass one piece front clip, doors, and rear hatch.
Almost all new and way too many to list. Car has NHRA certified chro-moly cage.
New paint, Lexan, New Lexan, 2 brand new clutches including one high doller , trans with spool, fuel cell, Hasport mounts, axles, more more more.
All welding and fab work done and painted. Feul cell mounts, battery mount, interior tin work, everything fabbed and painted.
Not running, needs wiring and header and ECU.

http://s976.photobucket.com/albums/ae248/scottlucky/

$4300.00
Call 714 342-6485
Located in Orange county, not far from Disneyland.

boostedcivicsir

msd 75611 programmable rev limiter box. works with all analog boxes.
http://www.msdignition.com/Products/RPM/Timing_Controls/RPM_Controls/75611_-_Programmable_Launch_Rev_Control.aspx

Too much power can actually be a hindrance when it comes to hooking up a small tire or the prop of a drag boat. For anyone with this “problem” the Programmable Launch Limiter is the answer. This microprocessor controlled Limiter plugs in place of an rpm module in an MSD Ignition or Soft Touch unit. You can then go in and program a launch-based rpm ramp based on rpm and time. This is set in 100 rpm steps down to 0.001-second increments by using MSD’s Pro-Data+ software on a PC or with the optional Hand Held Monitor, PN 7550. There is also an adjustment that sets a delay time before the rpm limit activates. This way, when you launch the rpm limit will kick in exactly when you want it to and ramp up to your race rpm for the rest of the run. This Limiter can be used with most of MSD’s Ignitions or Rev Controls (except the 7AL-3 and 10-Plus) that use the plug-in rpm modules. The Pro-Data+ software is supplied.

the box is 2 years old, plenty of length on the wires. well taken care of. i think we are getting a handle on the car without it.

testing waters, but if interested,
200 shipped.

d16z6Tcrx

eagle ls forged lightweight crank 89mm brand new in bag $400 obo




eagle rods ls/b20 $250 firm brand new in box





cp 9:1 compression 81.5mm turbo pistons $400 brand new.

will sell whole kit for $1000 obo



gsr cams $60



gsr trans $450 obo picked up only

JBLAZE622

brand new in the box precision 6262 t3 non ball bearing $800 shipped skunk 2 pro1 cams used for 2 seasons $450 shipped precision 600 hp FMIC used for 2 seasons like new $300 shipped
add 3% for paypal

kyle3838

This is a forward facing turbo manifold for a B series engine.
T4 flange
Tial 60 mm wastgate flange

This manifold came off Stephanie Eggums hot rod civic which ran 7.XX @ 18Xmph

asking $700 obo

i will include the wastegate for $1000

91' LS-VTEC

I DON'T WANT THIS ANYMORE.

I paid $1800 for this shell back in 07'
now I'll let it go for $1500 in the same condition I got it.

1pc fiberglass frontend (small crack)
fiberglass doors
1pc rear end
Roll cage. (no cert sticker on it, don't know if it was in the past)
still have the old plexiglass windows. They are foggy and be better used as templates to make new ones.

WILL NOT SELL JUST THE DOORS or FRONT END. Take it all.
located in Yakima,WA area (zillah,wa 98953)



*Link to more pics:

http://hondamarketplace.com/showthre...2701120&page=2




Also have a RLZ Engineering gsr head for sale. 0miles , still in plastic. $2200 has all new valvetrain installed by Brad. PM me for details.
*Link to head:

http://hondamarketplace.com/showthread.php?t=2722834

boosted hybrid

Selling a barely used AIR carbon fiber intake manifold for B16a and GSR cylinder heads. Manifold was used on a N/A project a few years ago, had dyno time and about 20 passes on it in total. Its in like new condition. I have owned 2 of these manifolds so far, and by far are the most bad-*** street manifold out there. They retain no heat, and make great power with no midrange loss compared to the edelbrock. Manifold comes with all hardware I used when I last ran it (not included when purchased new), IAT sensor, as well as T1 race development billet idle air control relocation flange. Price is firm at $1000.00 shipped in the 48 states.





Used, but excellent condition, ITR valve cover. $100.00 shipped in the 48 states.



Here are some pics and dyno graph from the engine it was previously used on:

http://forums.evans-tuning.com/viewt...hp?f=39&t=3179

GT30EK

Forced Performance HTA GT3586R BallBearing Turbocharger

It's for sale on EBAY by me.

http://cgi.ebay.com/ebaymotors/ws/eB...m=200433479208

Thanks of looking

matt k

handle for long shifter 60$mickey tubes 24.5 to 28 60$ aeromotive a1000 used one season 230$ bw/bullseye 365xl uses the 65mm ti comp wheel 83mm turbine 100ar 750$

10ring

1999 Civic Si EM1 Part Out

Well guys, due to a an awesome business opportunity that has come up I have decided I am going to be way too busy the next year or so to build my Civic drag car and have just decided to part everything out.

Everything below is brand new, never used. All prices are shipped in the US and are pretty firm, so low ballers will be ignored. Paypal is fine, add 3%.

Engine:
InlinePRO Allenbuilt B18C 84mm CP 10:1 Pistons, Pauter Rods, AEBS Sleeves, ACL Race Bearings, GSR Crank, Moroso Oil Pan included -- $3,000.00


Greddy B18C Timing Belt -- $90.00
AEM Tru-Time Cam Gear: 23-802 - Blue -- $90.00
AEM Tru-Time Cam Gear: 23-802 - Blue -- $90.00

Hogans B Series Intake Manifold w/2 Fuel Rails. Will work with B16 or B18 heads -- $650.00


T1 Race Development Catch Can Setup with Black Lines and Fittings and B18C GSR Valve Cover -- $500.00



Fuel:
RC 660cc Injectors with clips (x4) -- $225.00

Boost:
Full Race 3-4" Down Pipe B Series - Turbo-X Coated Black -- $350.00

TiAL MVS 38mm - 8 PSI Spring - Wastegate Blue -- $225.00
TiAL MVS 38mm - 8 PSI Spring - Wastegate Blue -- $225.00
TiAL Q Blow Off Valve - 8 PSI Spring - Blue -- $210.00


Garrett GT4088R .95 AR Hot Side Turbo-X Coated Black BRAND NEW NEVER USED -- $1,000.00


Suspension:
Progress Drag Only Coilovers - Part #75.1005 - $900.00


Blox BXSS-20204-BK Lower Control Arm 96-00 Civic - Black -- $100.00
Blox BXSS-20202 Adjustable Front Camber Kit (EK) 96-00 Civic - Silver --$120.00
Omni-Power Aluminum Front Lower Control Arms Civic 96-00 EKFLCA -- $300.00
Full Race EM1 ProStreet Traction Bar -- $250.00

Electronics:
AEM 30-5130B Black Face Analog Wideband Air - Fuel Gauge -- $175.00
AEM 30-5132B Black Face Analog 35psi Boost Gauge -- $175.00
AEM 30-4300 Serial Gauge Kit V2 -- $185.00
AEM 30-3255 EPM (Engine Position Module) Kit Honda BDH -- $300.00
AEM 30-2010 Air Temp Sensor Kit -- $45.00
AEM 30-2850-4PK CDI Short Pencil Coils -- $225.00
AEM 30-2821 Twin-Fire Ignition Modules -- $250.00
AEM 30-2001 UEGO Sensor Kit Bosch Wide Band -- $50.00
AEM 30-2130-75 5 BAR Map Sensor Kit -- $125.00
AEM 30-2060 Micro Relay w/Installation Kit -- $15.00
AEM 35-2611 PEMS Connector Kit -- $50.00
AEM 30-2400 Boost Control Solenoid Kit -- $75.00
AEM 30-2130-100 Fluid Pressure Sensor Kit 100 PSI -- $125.00

Cooling:
T1R B-Max Radiator Cap Type D -- $20.00
FAL Part #125 Honda Civic Radiator Fan 92-00 Direct Replacement -- $175.00
Fluidyne FHP11-92CIV Direct Fit Performance Radiator Honda Civic 1992-2000 -- $250.00
Samco TCS48C-BLU Hose Kit - Blue -- $95.00
Mugen 19301-XGER-0000 Low Temp Thermostat 99-00 Honda Civic Si --$40.00
Mugen 37760-XK5-00N0 Fan Switch -- $30.00

Boostedld9

spearco intercooler core size 23x10x3" $200


msd dis2 ho $475


motec m4, bought this last month off another member but have since decided on another route for my car. this box isnt unlocked but has a wiring harness i was told is for a sr20. $1000obo

Mr. Em1

iTrader: (1)

Brand New 26x10x15 Mickey Thompson on 15x9 Weld Magnum - $800firm




Brand New Bronze Drag dr16's w/ 235/60/15 Mickey Thompson Street Radials (1000 miles, 75% tread left and 2 Rota Gt3's 205/50/16 (95%)
- $500firm

zakura R

call or tex 978-944-3095

Nx selenoid nos 4 port with jets SOLD........SOLD

Bbk TB 70mm with b-vand SOLD...........SOLD

1995 F22 accord tranny ex with obx LSD mint $350

AllMoToRB18c

What's up everyone. Im selling my Allenbuilt Shortblock that I ran this past season. It only has 8 races on it. Its a 90x99 with custom CP pistons and custom InlinePro rods with ACL race bearings. Im listing a breakdown of what it would cost to build this new so you can have an idea. This is not a list of parts that I am selling and I will not part out the shortblock.
Stock K24 shortblock-$400
Custom CP pistons-$800
Custom InlinePro rods-$800
AEBS sleeves by InlinePro-$1275
ACL race bearing set-$160
OEM k20 oil pump-$145
Labor shortblock assembly by Jeremy Allen-$1250

Im looking to get $3200 obo for this shortblock. Its in great shape and the compression test in all four cylinders were damn near dead even. Only things that are missing is the timing chain and timing chain cover. Im not looking for any type of trades. Please bump if you read this. Now on with the pics.

FRernesto

RC 1000cc injectors used for sale 275.00 shipped. Injectors are in good condition.

fast is fun

88/91 civic MB 1 piece front end new $300.00 + shipping
Mark Willams LS/b16 spool & intermediate shaft & flang $ 550.00 + shipping
call 801-569-1300

.CUBISH.

84.5mm cp pistons
9.8 to 1 compression
eagle ls rods
used but in great shape
$400 sold


Victor x manifold for gsr with 74mm rps throttle body powder coated black $400 sold

Aeromotive a1000 fuel pump used $200 obo


Weldon 2025 fuel pump used $350 obo

Hondata s300 installed in a p28 ecu $500sold

aeromotive a1000 regulator -10 in -6 out $100


red aem fuel rail used $75

Walbro 255 inline fuel pump with fittings $100 sold

direct port nitrous kit. can be setup for dual dry kits or a single wet kit. complete with everything pictured $450


aem b-series 5 bolt cam gears in great shape $100



900+hp shortblock for sale
Darton m.I.d. Sleeves
84.5mm cp pistons 10 to 1 compression
Eagle rods
89mm crank balanced and polished by Benson
Brand new acl race bearing
Fresh bore/hone
Brand new rings
Oem itr oil pump
Brand new cometic head gasket
Arp head studs
$2500 obo sold

10sec4door

FSFSFSFSFSFSFSFSFSFSFSFSFSFSFSF

Turbo xs quad stage boost controller. New never used never mounted. 275 shipped

Text or call 856-470-6105

jasonp

Precision Water To Air Intercooler $500.00


Prologger Boost Controller $75.00

Prices doesn't include paypal or shipping.thanks..

jdmdc529

RSX Shifter box with cables $150

K series competition clutch twin disc. $1200 BRAND NEW!
http://i25.photobucket.com/albums/c5.../Twindisc2.jpg

k20z1 Oil pan with welded -10 bung $100

-Circuit werx hubs w/ studs includes civic knuckles and new honda wheel bearings and ball joints $450
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-(new)AEM EMS for kswap cars $1000
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-AEM 3.5 bar map sensor $100
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

- k20 (new)Eagle rods $250

- k series (new)Wiesco pistons 9:0:1 86.5 $450

-k20 (new)Cometic MLS gasket $75
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-PWR radiator $175
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

jjspec

These are some items that are in good usable shape that have accumulated over the years. Please feel free to ask questions. Will be adding more items and pics so feel free to check back soon. Thanks for looking
Wiseco Pistons PN#6566M81 B Series 81MM High Compression. Around 11.5-1 depending on head, head gasket thickness, etc. Around 1000 miles. $250:


Wiseco Pistons/Eagle Rods. Sold

GReddy Kit for D-Series. Complete with everything including fmic. Does not have engine management. Came off of my personal car for upgrade $800. Can be installed for total of $1200:




Stock replacement clutch for H/F Series $75:



Driveshaft Shop Level 3 H/F Series in a Civic/Integra kit rated >500 whp $400. Uses Accord intermediate shaft(will sell for $25 if you buy the axles):



Intermediate shafts for H/F Series. Top is aluminum carrier for H $80, middle is sold and bottom is Accord with no carrier $40:



Misc fuel rails. Stock D/H/F/K $50. Aftermarket D $75:



Plenty of random intake and exhaust stock manifolds. Mostly Honda stuff but there is one 4G63 intake manifold. $60 per intake and 40 per exhaust 100 for Headers. PM if you have one you need:



H Series Skunk 2 Manifold from JJSPEC Racing Hot Rod(Ran 9.2 @158 on it)$225:



Complete H22 head from valve cover to headbolts $225:



JJSPEC Racing's 1995 Honda Civic Hot Rod Chassis(Race Car, VIN N/A) $3500:
Chassis only. Comes with:
Chromoly 12 point cage certified until 2010 with parachute mount wheelie bar mounts
1 piece rear axle setup that will accommodate factory or aftermarket brakes
Spare tire well removed and replaced with Aluminum
Eibach Springs Rear
Competition Engineering rear shocks
1 piece MB Products fiberglass front end
MB Products trunk lid
Lexan windows
Lightened Factory doors
Cromoly Wheelie Bars
Will sell trailer and chassis together for $7000









24 foot enclosed trailer. This is a great unit for hauling your race/show car. Has extra height roof, wide side door that you can bring a four wheeler through. Has some minor damage on R/F and R/R. Comes with a weight distribution hitch($400 value) and spare wheel(needs a tire). Paid $6500 new, asking for $4500:



ECUs. OBD10A P14 PT6 PO6 P2P PR4 P2E PT6 OBD2: POB PAA K Series PNA



Stock Oil pans D/F/H Series $25

Stock Valve Covers $50 Can have bungs welded on for an addition fee.

JJSPEC Racing Lazer cut SS keytags $5.00:

ALL IMPORT

Well got a few more things to offload.
if u need vouches LMK got lots.

please IM me any questions or for purchases as i dont always check this thread. thanks
ALL PRICES INCLUDE SHIPPING.

1st. is a AEM EMS 1060. still works flawless guaranteed. $ 720
still have box all connectors & disc. no worries.
came off my 96 teggy
also includes the AEM serial data stream guage. see pic
see 19 diff functions on 1 guage

2nd. is a AEM steering pump pully. blue $45 SOLD

3rd. is a autometer PRO COMP 2 ultra light tach. $200
comes with the autometer quick light.

4th. is a COMPLETE GEAR SET, 2000gsr both main & counter shaft. $450 SOLD
both stacks are in perfect conditon GUARANTEED>
any one that wants to drive to west palm beach
i will personally install this in your trans & it will only take
about 1 hour. ( if the trans is already out ) no charge.







fell free to ask any questions.
remember everything is guaranteed to work & is in perfect working condition.