Dec FS THREAD

Closed Thread Subscribe

Thread Tools

Search this Thread

12-01-2011, 04:45 AM

crazes

Moderator

Thread Starter

Join Date: Feb 2008

Location: queens, ny

Posts: 3,264

Likes: 0

Received 1 Like on 1 Post

Dec FS THREAD

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here

Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.

From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

12-01-2011, 05:31 AM

EDLOVA23

Honda-Tech Member

Join Date: Nov 2007

Posts: 347

Likes: 0

Received 2 Likes on 2 Posts

Re: Dec FS THREAD

IF INTERESTED CALL 973)390-2982

B-series shift linkage with a B16 shifter*

4" aluminum exhaust $650

custom catch can sits next to the battery $275
the bracket is welded onto the battery tray*

comes with
battery tray w/ bracket welded to it
all 4 lines and fittings minus the 2 fittins on the actual block

wrinkle blue valve cover $100

Last edited by EDLOVA23; 12-02-2011 at 09:51 AM.

12-01-2011, 05:45 AM

CHEETAH

Honda-Tech Member

iTrader: (2)

Join Date: Mar 2002

Location: Woodbridge, NJ, Middlesex

Posts: 5,828

Likes: 0

Received 1 Like on 1 Post

Re: Dec FS THREAD

Z10 B-series two stage oil sump kit with oilpan, etc.. $1400

ported b16a bare head with caps $600
see pic here:
http://www.gbrtuning.com/B16PORTED.jpeg

88 CRX full race car chassis shell - 1 pc detachable front, detachable doors and hatch, plexi windshield, rollbar (10.0 approved), aluminum dash, etc..was $1450lbs with driver and b-series...have kit for k-series if needed to convert...$2000neg

pic from back in the hondatech booth at etown back in the day (doesnt come with the wheels)
http://www.gbrtuning.com/cheetah_front_drv_ht.jpg

14.5:1 compression allmotor K24 longblock, 87.5mm x 99mm, ported head, IPS cams, RRC intake manifold, custom IPS JE pistons, made 320whp with IPS intake manifold...$inquire

pic of the pistons and rods used in the longblock:
http://www.gbrtuning.com/k24_IPS7.JPG

pm for details or email me at gbrtuning at aol dot com

Last edited by CHEETAH; 12-02-2011 at 09:36 AM. Reason: added pics

12-01-2011, 05:47 AM

JDM JEFFREY

Honda-Tech Member

iTrader: (1)

Join Date: Dec 2004

Location: CALI

Posts: 3,244

Likes: 0

Received 1 Like on 1 Post

Re: Dec FS THREAD

SOLD

Last edited by JDM JEFFREY; 12-14-2011 at 03:29 PM.

12-01-2011, 06:09 AM

01DC4

Honda-Tech Member

iTrader: (3)

Join Date: Dec 2006

Location: FL - PA

Posts: 1,533

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

-Shop Clean out-

All parts are used but in excellent working condition.

BDL 68mm B Series Billet ThrottleBody, $150.00 Shipped

DC Sports 4-1 Header, Used but in surprisingly great condition, High Temp Black, No Crush's, Dents, or Scrapes in the piping, $160.00 Shipped

Eagle B16 Rods, Like new only used for a few dyno pulls (All Motor) Under 5 miles of use, $220.00 Shipped

ARP B16 Headstuds, Like new only used for a few dyno pulls (All Motor) Under 5 miles of use, only torqued once, comes with fresh ARP lube, $60.00

AEM Fuel Rail B Series, Silver, In good shape, Comes with -6 Feed Fitting, SOLD

Wiseco High Compression 12:1 Pistons, 81mm, Wiseco Part #6593M81, Like new condition with good rings,wrist pins and locks, Only used for a few dyno pulls (All Motor) Under 5 miles of use, SOLD

Unorthodox Racing Silver B Series Cam Gears, Good Condition, $90.00 Shipped

OEM Honda B16 Timing Belt, Like new, Only used for a few dyno pulls (All Motor) Under 5 miles of use, $45.00 Shipped

Older Skunk2 Racing GSR Intake Manifold, Good Condition, $140.00 Shipped

Skunk2 Racing Pro-Series B16 Intake Manifold, Good Condition, $160 Shipped

B16 Head Fully Ported, Crower Springs and Crower Ti Retainers, New Guides and Valve Seals, Stock Valves, Comes with vtec solenoid, water neck, all sensors, and all matching cam caps, Only used for a few dyno pulls (All Motor) Under 5 miles of use since assembly $600.00 Shipped

B16 Head, Stock Port, Unknown Aftermarket Springs and Retainers, Stock Valves, Comes with vtec solenoid, water neck, all sensors, and all matching cam caps, Overall in good condition, $400.00 Shipped

B16A Block Bare, with matching mains, 81mm, Cylinders all in great shape, $200.00 Shipped

B16 EG/DC Drivers Side Mount, Excellent Condition, $70.00 Shipped

Fidanza B Series Flywheel, Low miles Great Shape, $160.00 Shipped

PM me for fastest response.

12-01-2011, 06:34 AM

GT30EK

Honda-Tech Member

Join Date: Nov 2007

Location: NY

Posts: 277

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

Will Sell as a Kit for cheaper, but with No WASTEGATE.

Also will sell intercooler, piping , and BOV separate.

Full Race Ram Horn Non A/C T3 44mm wastegate flange. (Includes Manifold, V Band Down pipe, and Dump tube for 44mm wastegate) 1000 OBO Shipped

Full Race Back Door Intercooler 20X11X3 with Piping to throttle body with all T bolt clamps and Couplers. and Tail 50mm BOV. Full Race says it's good to 720whp, I made 805Whp with it no problem. 1000 OBO Shipped

BEP S366 T3 .70 A/R Vband exhaust . Made 805WHP @ 32Psi on 2.0L B-Series. Have about 30 Pass on the turbo, NO Smoke runs mint. 700 OBO Shipping.

Dyno - http://dynos.evans-tuning.com/2010/1...540tq-aem-ems/

3 Inch SS Exhaust with Magnaflow for Ek Hatch 350 OBO Pick up, maybe will ship.

Integra Type R UKDM Cluster. Rare 170 Mph and 10k Tach. 250 Shipped

Cluster will work mint in OBD2 cars, if you are OBD1 the fuel gauge will not read right will need to swap the board on the back with an OBD1 gsr board. That's what I did when I ran it in my EG. Now it's in an EK OBD2.

Rywire ECU Jumper Harness will allow 88-91 Honda Civic / CRX, Acura Integra and other OBD0 Honda and Acura to convert over to OBD1 ECU. Brand New 100 Shipped

ID 1000cc Hats for a B-Series and OBD1 adapters SOLD.

Last edited by GT30EK; 12-01-2011 at 03:17 PM.

12-01-2011, 07:04 AM

EF'n Sedan

Honda-Tech Member

iTrader: (1)

Join Date: Sep 2004

Location: In front of You!

Posts: 1,853

Likes: 0

Received 1 Like on 1 Post

Re: Dec FS THREAD

- 13x8" 4x100 Weld Import Magnums....$550

Last edited by EF'n Sedan; 12-06-2011 at 02:39 AM.

Trending Topics

**OFFICIAL FORCED INDUCTION RANDOM CHAT THREAD**

6.0k

289.9k
Can this be fixed? K20z3

4

124
2002 Honda Civic Ex

11

622
2000 Honda Prelude Ticking, Burning Oil on Acceleration

3

135
Ac for 93 del sol with b18b1 swap

3

130

12-01-2011, 07:32 AM

littlebluecrx

Honda-Tech Member

Join Date: Mar 2002

Location: Crofton, Md, USA

Posts: 2,459

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

FS Tilton Carbon Carbon twin disc b series with light weight steel flywheel 3000.00 retials for over 4000 ....clutch has 12 hits have release bearing may through in if your not a flake....

12-01-2011, 07:40 AM

AROD

Honda-Tech Member

Join Date: Oct 2003

Location: Albany, N.Y., us

Posts: 1,195

Likes: 0

Received 1 Like on 1 Post

Re: Dec FS THREAD

Honda Civic EG Hatch Drag Wing, with all the mounting brakets $175 my paypal is arod10@aol.com.

Pictures:
http://www.facebook.com/pages/CCC-Ra...44996942219732

12-01-2011, 08:17 AM

#10

cleanstem1

Honda-Tech Member

Join Date: Apr 2009

Posts: 9

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

whats up honda-tech..im selling my aem cop setup this setup is plug and play its brings 4 cdi coils part# 30-2850,aem tiwn fire part# 2821-0463, and aem epm part# 30-3255 this setup will fit b bseries,dseries, and hseries and it brings a harness setup for hondas...... my asking price is 650$ lmk OR email me at jdmsquad164@gmail.com

12-01-2011, 09:03 AM

#11

boostedb20z

Honda-Tech Member

iTrader: (1)

Join Date: Oct 2005

Location: Des Moines,IA

Posts: 598

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

Its time to sell my car that i have been building for 4+ years this car has been a blast. It makes 508whp on 24psi and first pass off the trailer in went 10.64@137mph it for sure has a low 10sec pass in it and well into the 140mph. The chassis has 10 passes on it and this engine setup has 3 passes on it. This is not a street car I have the title in hand car is a turn key car ready to hit the track and its only 1900lb w/o driver. willing to part car out but engine must be sold first.
You can call/text me at 515-360-7331

Bottom End:
B18b block stock bore and sleeves
Cp pistons
OEM head gasket
Eagle Rods
ACL Race bearings
moroso oil pan
arp head studs

Head:
GSR head stock ports
rocket motorsports valve springs and retainers
V-Tec lockers
Edelbrock intake manifold
hondata intake manifold gasket

Tranny:
GSR with OBX diff Grinds going into 2nd needs 1-2 sliders
Stock alxes
act 4-puck unsprung

Turbo setup:
750hp intercooler
SC61
Spa Topmount
50mm BOV
38mm Wastegate

Chassis:
sk2 coil overs if front but used the sk2 sleeves in back on 18k springs
8 point cage
24.5x8x13" slicks on weld wheels

Fuel setup:
A1000 pump
sumped tank
2 earls filters one 100 microns and the other 10
-8 to pump and -6 everything else
aeromotive fpr
BDL fuel rail
ID 1000cc

12-01-2011, 09:48 AM

#12

Duende

Honda-Tech Member

Join Date: Jul 2009

Posts: 409

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

I would like to trade for some 13inch Weld Magnums, maybe some bogarts or lensos must have 24 or 24.5s slicks on them with cash on top....show me what you got..maybe even something with skinnies,

Price: 510 + paypal and shipping

MUST SALE ASAP!!!!!!!!!!!

They are 4x100 lug pattern 15x10

Last edited by Duende; 12-06-2011 at 09:47 AM.

12-01-2011, 10:26 AM

#13

aspsrt05

Honda-Tech Member

Join Date: Feb 2011

Posts: 150

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

Bluefield, WV
paypal: cs_racing_0030@yahoo.com
pm me if interested

Bosch Low Impedance 1600cc Injectors and Resistor Box $325 shipped

12-01-2011, 10:43 AM

#14

BEfab

Honda-Tech Member

Join Date: Aug 2010

Posts: 95

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

AEM 30-4300 Serial Gauge Brand New In Box $185 Shipped

------------------------------------

CUSTOM Sidemount Turbo Manifold for B18 Integras. Places turbo on transmission side flanged for T4 divided turbos. Can be used with AC and power steering and even full size radiator. Does not have wastegate provisions yet, but you can add them yourself. It is completely stainless steel sch 10 piping. All professionally tig welded.

$500 OBO

------------------------------------

CUSTOM IACV Remote Mounting Kit

I have a custom made kit to allow you to remote mount a honda IACV. It comes with everything pictured except the IACV. One flange bolts to the intake manifold and then all you have to do is weld a bung to the charge pipe pre throttle body.

$100 OBO

+

------------------------------------

Vibrant P/N: 2461 Turbo Manifold Collector

This is brand new. I never used it for a project I was working on.

$75

------------------------------------

Walbro 255LPH GSS342 w/ Install Kit

This is brand new never used.

$85

------------------------------------

I have two Brand New 3.5" Vibrant Performance Stainless VBand Assemblies P/N: 1492

$70 Shipped EACH

------------------------------------

I have a few Brand New Vibrant T-Bolt Clamps. I will do $7 for each bag. 2 comes in a bag. The part numbers and how many bags I have are below.

P/Ns & (QTY):
2796 (4)
2791 (1)

------------------------------------

I have one (1) Vibrant Performance 4" Stainless Steel V-Band Weld Flange. It is the male side. P/N: 1493S

$25 Shipped

------------------------------------

I have one (1) Vibrant Performance 3.5" Stainless Steel V-Band Weld Flange. It is the female side. P/N: 1492S

$25 Shipped

Last edited by BEfab; 12-09-2011 at 04:21 AM.

12-01-2011, 10:56 AM

#15

ls_on_boost

Honda-Tech Member

iTrader: (5)

Join Date: Mar 2009

Location: sunshine state

Posts: 984

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

i have a stock sleeve built ls for sale motor was built by src racing here in fl it made 416hp and 317tq tuned by kenny aka turbogixxer the motor has less than 200 miles most of the miles it was driven to the track and back and has 6 1/8 passes motor is in perfect shape it was built for 500hp dd reason im selling it is its just sitting in my room i was keeping it for my backup but i need money to finsh my current car i am in no rush to sell this motor i put 2400 into this block i want 1500 shipped and paypaled also the oil on the cylinder walls is there to keep them from getting rust here are the specs on the motor pm me or text with questions 786-298-4709

81.5 cp pistons 10:1
eagle rods
acl race bearings
block was resurfaced blue printed and balanced
arp head studs missing one nut
no oil pump no water pump

[IMG]

[/IMG]
[IMG]

[/IMG]

12-01-2011, 01:23 PM

#16

tuan_turbo_dc4

Honda-Tech Member

Join Date: Dec 2003

Location: Oklahoma City, Ok, 73170

Posts: 343

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

Motor
Golden Eagle 85mm GSR B18C1 Block, CP 10:1 Pistons, Crower Rods, O-ringed, Golden Eagle Oil Feed Sandwich $ 1500.00

Last edited by tuan_turbo_dc4; 12-01-2011 at 01:44 PM.

12-01-2011, 02:02 PM

#17

PRO1

Honda-Tech Member

Join Date: Sep 2009

Location: Charlotte,NC

Posts: 718

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

Exedy Twin Disc Clutch For Bseries has about 20 passes, $600
[IMG]

[/IMG]

12-01-2011, 05:12 PM

#18

E Town DSM

Honda-Tech Member

Join Date: Apr 2001

Location: elizabeth, nj, usa

Posts: 1,974

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

NGK Wideband O2 Sensor Kit With Display Uses better quality NTK Sensor Used But In great shape- $200

AEM V1 1060 box setup for trigger kit but can be converted back-$700

MSD Boost COntroller Does time based boost, logging, can do c02 based control also comes complete with solenoids and all wiring- $350

3.5" Aluminum Exhaust with Viabrant race muffler for EK might fit other models $550

GSR Shift Linkage With Energy Suspension bushings-$125

Hasport 94A Motor Mount Inserts hardest they make before solid-$75

MSD Digital 7 Ignition setup 75314 box with higher output for drag racing. The gold box that can do traction control, step retards, gear based retard, etc. A very important piece in getting those short times down used on all the fastest fwd cars in the world. Comes with the noise capicitor. Will also include new harness. Complete setup $700

Attached Images

Last edited by E Town DSM; 12-27-2011 at 12:35 PM.

12-01-2011, 05:31 PM

#19

twkdCD595

Honda-Tech Member

Join Date: Jun 2002

Location: USA

Posts: 5,551

Likes: 0

Received 1 Like on 1 Post

Re: Dec FS THREAD

Edit. SOLD.

Last edited by twkdCD595; 12-03-2011 at 10:43 PM.

12-01-2011, 05:59 PM

#20

jdm inc

Honda-Tech Member

iTrader: (11)

Join Date: Mar 2004

Location: KS

Posts: 3,096

Likes: 1

Received 5 Likes on 5 Posts

Re: Dec FS THREAD

pm for more info.

sls 4" dp $300

new-4 oil restrictor $30

12-01-2011, 07:52 PM

#21

habib

Honda-Tech Member

Join Date: Aug 2005

Location: Shreveport, La

Posts: 757

Likes: 0

Received 1 Like on 1 Post

Re: Dec FS THREAD

Borg Warner S372 turbo - $800 shipped obo
Aftermarket b16 casting head with blox dual valvesprings/retainers, supertech valves - $500 shipped
Blox 70mm throttle body - $140 shipped
Act six puck unsprung clutch and pressure plate - $250
Competition clutch flywheel - $150

12-01-2011, 09:33 PM

#22

Themouse

Honda-Tech Member

Join Date: Nov 2005

Location: NY

Posts: 1,421

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

FS:
Wiseco Piston Rings 84mm Brand New-$100

ALL PRICES OBO
Combined Pricing also

Last edited by Themouse; 12-09-2011 at 03:36 PM.

12-02-2011, 12:23 AM

#23

cleanstem1

Honda-Tech Member

Join Date: Apr 2009

Posts: 9

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

Hey selling my injector 1000cc in perfect working condition im asking 225 for these injectors part #17113744

12-02-2011, 01:34 AM

#24

Garage786

Honda-Tech Member

Join Date: Dec 2006

Location: UK

Posts: 128

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

B-series G-Force Gearset- $4500

Perfect condition ready to be installed. Im from the UK but will be going Orlando very soon, so can bring with me. You get 2 final drives iswell I believe 4.0 and 4.7. I can email anyone close up pics if requested.

1st- 2.92
2nd- 1.88
3rd & 4th have been upgraded, so I need to count the teeth and work it out.

Last edited by Garage786; 12-04-2011 at 03:25 AM.

12-02-2011, 06:04 AM

#25

fukenboostin

Honda-Tech Member

Join Date: Oct 2005

Location: mississauga, ontario, canada

Posts: 183

Likes: 0

Received 0 Likes on 0 Posts

Re: Dec FS THREAD

precision 525's............................$200
obd 1 p72 with hondata s200b......$225
obd2a to obd 1 jumper.................$60
or all for $425
turbo xs manual boost controller....$50
gsr cams.....................................$200

pm for quick response

Closed Thread Share

First
Prev
1 / 5
Next
Last