best shifter for drag racing?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: missouri
Posts: 4,009
Likes: 0
Received 0 Likes
on
0 Posts
best shifter for drag racing?
what shifter do you like for drag racing?
i had a cheapo apc short shifter for years and it was complete junk.
and then i switched back to oem shifter which im using right now and its not as bad as the apc one but still junk. the oem goes in gear alot smoother but its making me miss alot of gears for some reason..
i had a cheapo apc short shifter for years and it was complete junk.
and then i switched back to oem shifter which im using right now and its not as bad as the apc one but still junk. the oem goes in gear alot smoother but its making me miss alot of gears for some reason..
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: missouri
Posts: 4,009
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Bailhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bailhatch »</TD></TR><TR><TD CLASS="quote">motor mounts?</TD></TR></TABLE>
why yes i do? motor doesnt move 1/2 a millimeter.
why yes i do? motor doesnt move 1/2 a millimeter.
#6
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2002
Location: Woodbridge, NJ, Middlesex
Posts: 5,828
Likes: 0
Received 1 Like
on
1 Post
Re: best shifter for drag racing? (mike93eh2)
the stiff shifter bushings make a world of a difference, lol Mugen sells the kit for liek 80 buks and it really does feel good.
i'm more a C's shifter with the skunk2 **** LOL ... the heavier know helps with balance ... ever pick up an FD3S shiftknob ?
i'm more a C's shifter with the skunk2 **** LOL ... the heavier know helps with balance ... ever pick up an FD3S shiftknob ?
Trending Topics
#8
I'm really 2slow
Re: (Arturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">OEM with a skunk ****. </TD></TR></TABLE>
#10
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: missouri
Posts: 4,009
Likes: 0
Received 0 Likes
on
0 Posts
Re: (rota92)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rota92 »</TD></TR><TR><TD CLASS="quote">What mounts are you running? Just for curiosity lol</TD></TR></TABLE>
prothane on the 2 side mounts and rear tranny mount and then i window welded the a/c torque mount and also the front tranny torque mount.
still havent got a good response as to what the best shifter is.
prothane on the 2 side mounts and rear tranny mount and then i window welded the a/c torque mount and also the front tranny torque mount.
still havent got a good response as to what the best shifter is.
#11
Honda-Tech Member
Join Date: Mar 2002
Location: Anaheim, CA, USA
Posts: 6,093
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mike93eh2)
On my old race car, I ran the stock shifter with the upgraded bushings and it worked good for me I do not think your going to get an answer on what the "best" is. Seems like this would be personal taste. Good luck with it!
#13
Honda-Tech Member
Re: (ninesecrx)
I like a stock shifter best too.
It's not your stock shifter making you miss gears. It's either slop in the linkage or shifter bushings, a bad trans, or you can't drive.
It's not your stock shifter making you miss gears. It's either slop in the linkage or shifter bushings, a bad trans, or you can't drive.
#14
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: missouri
Posts: 4,009
Likes: 0
Received 0 Likes
on
0 Posts
my rebuilt tranny has been wierd lately. i didnt start missing gears (usually second) until i put the stock shifter back on and replaced the syncromesh with the new honda mtf. im starting to not like the new honda mtf water.. i think that is what is causing the problems. as soon as it warms up it doesnt like to go into gear as good. that **** was like water going in but i thought it was the best to use.
#18
Honda-Tech Member
Join Date: Jan 2003
Location: wa, usa
Posts: 3,274
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Arturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">OEM with a skunk ****. </TD></TR></TABLE>
same here
-zol
same here
-zol