Backdraft's new PB 9.50 @157 at WCN Bakersfield
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: The OC, CA, USA
Posts: 1,283
Likes: 0
Received 0 Likes
on
0 Posts
Backdraft's new PB 9.50 @157 at WCN Bakersfield
I thought I would share a video of my new personal best. The set up is 83mm GSR, CTR cams, 72mm throttle body, Garrett 4294r turbo, DSS 5.9 axles, stock GSR 4.40 transmission, Hondata S300. On the next pass, the transmission broke. So I will need to upgrade or fix that before Las Vegas IFO.
My previous personal best was 9.92 @153mph and I know there is a lot more work to get the ET's down, but am ready for it and look forward to it!
A huge thank you goes out to the crew (Zero 4 Racing), our families, friends, and sponsors:
(Clutch Masters, Skunk2 Racing, Hondata, Fatkid, Esa Designs, Portflow Cylinder Head Design, and BlueRidge Motorsports)
60' 1.598
330' 4.289
1/8 6.332
mph 125.32
1000' 8.073
1/4 9.50@157mph
Enjoy the video
My previous personal best was 9.92 @153mph and I know there is a lot more work to get the ET's down, but am ready for it and look forward to it!
A huge thank you goes out to the crew (Zero 4 Racing), our families, friends, and sponsors:
(Clutch Masters, Skunk2 Racing, Hondata, Fatkid, Esa Designs, Portflow Cylinder Head Design, and BlueRidge Motorsports)
60' 1.598
330' 4.289
1/8 6.332
mph 125.32
1000' 8.073
1/4 9.50@157mph
Enjoy the video
Last edited by backdraft; 09-27-2013 at 11:48 AM. Reason: wrong text
#3
Honda-Tech Member
Join Date: Aug 2006
Location: Winfield, KS, US
Posts: 584
Likes: 0
Received 0 Likes
on
0 Posts
Re: Backdraft's new PB 9.50 @157 at WCN Bakersfield
Congats! What is your fuel set up like? What kind of numbers does the car make on the dyno if you dont mind me asking?
#6
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: The OC, CA, USA
Posts: 1,283
Likes: 0
Received 0 Likes
on
0 Posts
Re: Backdraft's new PB 9.50 @157 at WCN Bakersfield
Thanks everyone for the comments.
#7
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2005
Location: Salt Lake City, Utah
Posts: 1,508
Received 0 Likes
on
0 Posts
Re: Backdraft's new PB 9.50 @157 at WCN Bakersfield
Very nice ET with stock gears! Did the trans have a cuff or upgraded synchros or was it bone stock? Open diff or LSD/spool? Does the car have a traction bar? Just curious.
Seems like the front shocks have a bit of travel.... Preloaded?
Seems like the front shocks have a bit of travel.... Preloaded?
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: The OC, CA, USA
Posts: 1,283
Likes: 0
Received 0 Likes
on
0 Posts
Re: Backdraft's new PB 9.50 @157 at WCN Bakersfield
That is something that I have been trying to figure out how to resolve with the front shocks. The suspension is Omni Power coilovers with 800lb in front and 1000lbs in the back and an LCON traction bar that is set up just snug...not pulling or binding the suspension.
The trans is stock gears with upgraded carbon synchos, Quaife LSD, and the liberty handcuff. but all stock gears and ratios.
The trans is stock gears with upgraded carbon synchos, Quaife LSD, and the liberty handcuff. but all stock gears and ratios.
Thread
Thread Starter
Forum
Replies
Last Post
A train
Drag Racing
119
06-16-2008 07:53 PM
iBrandon
Forced Induction
32
06-10-2006 09:04 AM