b16 10.19 stock sleeves
07-17-2012, 01:28 AM
#26
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: TEXAS
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 10.19 stock sleeves
The lip is made out of alu. I was on 25in m&h i love them.. Thanks everyone. Still have not reached our goal but its there with a little more seat time
07-17-2012, 02:14 PM
#29
Honda-Tech Member
Join Date: Dec 2009
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 10.19 stock sleeves
When my car was bone stock internals i ran 10.76 @ 406hp in a ebay set up. Daliy drove it for yrs. Then i wanted more power. Built it and ran it for about a yr till my diff broke. So i fixed it lol welded it up and put it back in. then we made the 600 broke a axle in 3rd gear and almost hit the wall.. Orderd me some 3.9s took it back to the track and on the 2nd pass the oil pump blew up.. me and my buddy rebuilt it and we are back at it. I am on the thread of highest stock blocks on here . My buddy jockobo posted my set up. Ill post the vid of me breaking the axle
what are you using to tune the car with?
07-27-2012, 09:02 AM
#32
Honda-Tech Member
Join Date: Nov 2007
Location: fort worth, texas, united states
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 10.19 stock sleeves
nice set up man,seen this car in person pretty impressive... also where did you buy the front lip..lmk i want one for my car.. good luck!!!
07-27-2012, 04:20 PM
#33
Honda-Tech Member
Join Date: Nov 2005
Location: Baltimore, Maryland
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 10.19 stock sleeves
When my car was bone stock internals i ran 10.76 @ 406hp in a ebay set up. Daliy drove it for yrs. Then i wanted more power. Built it and ran it for about a yr till my diff broke. So i fixed it lol welded it up and put it back in. then we made the 600 broke a axle in 3rd gear and almost hit the wall.. Orderd me some 3.9s took it back to the track and on the 2nd pass the oil pump blew up.. me and my buddy rebuilt it and we are back at it. I am on the thread of highest stock blocks on here . My buddy jockobo posted my set up. Ill post the vid of me breaking the axle
07-27-2012, 04:51 PM
#34
Re: b16 10.19 stock sleeves
Wow very impressive with a stock sleeved setup, wish you luck for the 9's! 
I would however just to be on the safe side ditch the eBay wastegate. That would be one part I would be catastrophic to fail with stock sleeves...
I would however just to be on the safe side ditch the eBay wastegate. That would be one part I would be catastrophic to fail with stock sleeves...
07-27-2012, 09:36 PM
#35
Honda-Tech Member
Join Date: Apr 2007
Location: NYC
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 10.19 stock sleeves
veeeerrryy impressive! keep up the good work man...
somewhat makes me want to up the boost on my little setup lol. mine is a 1.8 with forged internals, however i only have gsr cams and im using an hx35w.
somewhat makes me want to up the boost on my little setup lol. mine is a 1.8 with forged internals, however i only have gsr cams and im using an hx35w.
07-28-2012, 12:15 PM
#36
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: TEXAS
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 10.19 stock sleeves
My buddy from addiction sports made the lip for me.. the 10.76 was all stock internals from oil pan to valve cover. It was on e85. And the turbo used was a "big shaft" t3. I dont recall the specs to it.. The wastegate holds boost solid.. I think i might change it after i get my 9sec pass.
07-28-2012, 02:22 PM
#38
Re: b16 10.19 stock sleeves
X2... im on a stock b16 with a ported head and ctr intake and gsr exhaust cams.. im running a holset hx35..seeing this gives me lot's of hope with hitting 10's..the setup will be in a crx.. i can't wait to be out at the track again.. congrats and hope to see u hit ur goal really soon!!
Thread
Thread Starter
Forum
Replies
Last Post
mrx
Forced Induction
18
10-12-2004 10:11 AM
importboi22
Forced Induction
3
07-06-2004 12:59 PM