April FS Thread
#51
Honda-Tech Member
Join Date: Nov 2008
Location: westminster, ca, us
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
FJO KID0404 4-Channel Injector Driver Kit BRAND NEW IN THE BOX
SET OF FRESH BOSCH 1600CC WHITE TOP INJECTORS ALREADY SHAVED FOR B/H/D/F SERIES RAIL W/ NEW GSR TOP O RINGS.. NEVER RAN IN CAR YET...
INJECTORS AND DRIVER 500 SHIPPED NO TRADES CALL ME AT 714 767 2650 JR.
SET OF FRESH BOSCH 1600CC WHITE TOP INJECTORS ALREADY SHAVED FOR B/H/D/F SERIES RAIL W/ NEW GSR TOP O RINGS.. NEVER RAN IN CAR YET...
INJECTORS AND DRIVER 500 SHIPPED NO TRADES CALL ME AT 714 767 2650 JR.
#52
Honda-Tech Member
Re: April FS Thread
Name: Darryl
Location: Durham, NC
Contact: d_baker3@hotmail.com
Up for sell is my B-series exhaust flange. I was going to use it for a custom exhaust manifold, but my plans changed.
I purchased this flange from AFI Turbo. It's an half inch thick and made from steel. I'm looking to get $25 shipped for it. If interested email me at the address above.
Location: Durham, NC
Contact: d_baker3@hotmail.com
Up for sell is my B-series exhaust flange. I was going to use it for a custom exhaust manifold, but my plans changed.
I purchased this flange from AFI Turbo. It's an half inch thick and made from steel. I'm looking to get $25 shipped for it. If interested email me at the address above.
#53
Honda-Tech Member
Join Date: Nov 2006
Location: new albany, in, united states
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
TPR stage 5 B18B1 bottom end
I paid 5,000 dollars for the motor new from Rob Morse @ total performance racing out of Cincinnati Ohio. The motor never saw any power and has about 5 miles on it. I parted the car out before i finished the car to get tuned and do any kinds of pulls
I am asking 2500 for the motor plus shipping and paypal fees.
ERL 84mm sleeves with ERL 5 point main girdle
CP pistons Calico Coated
Manley turbo tuff rods with ARP rod bolts
ACL race bearings calico coated
OEM LS crank with TPR machine work
5.5 quart Moroso oil pain
ARP head studs
T1 1 of a kind Catch can Cooling setup $800 plus shipping and paypal fees
T1 Catch can with breather part/coolant fill/coolant overflow
DOHC VTEC valve cover with 4 -10 bungs welded by Rob @ TPR
Koyo half size radiator with -16 bungs welded on by Rob @ TPR
Thermostat and head piece for GSR head with -16 bungs welded on
Comes with all the stainless steel braided lines for the radiator and catch can.
Avid racing Solid engine mounts For Bseries in a DC integra only used to mount engine in car, never saw any kind of miles with power.
$300
I paid 5,000 dollars for the motor new from Rob Morse @ total performance racing out of Cincinnati Ohio. The motor never saw any power and has about 5 miles on it. I parted the car out before i finished the car to get tuned and do any kinds of pulls
I am asking 2500 for the motor plus shipping and paypal fees.
ERL 84mm sleeves with ERL 5 point main girdle
CP pistons Calico Coated
Manley turbo tuff rods with ARP rod bolts
ACL race bearings calico coated
OEM LS crank with TPR machine work
5.5 quart Moroso oil pain
ARP head studs
T1 1 of a kind Catch can Cooling setup $800 plus shipping and paypal fees
T1 Catch can with breather part/coolant fill/coolant overflow
DOHC VTEC valve cover with 4 -10 bungs welded by Rob @ TPR
Koyo half size radiator with -16 bungs welded on by Rob @ TPR
Thermostat and head piece for GSR head with -16 bungs welded on
Comes with all the stainless steel braided lines for the radiator and catch can.
Avid racing Solid engine mounts For Bseries in a DC integra only used to mount engine in car, never saw any kind of miles with power.
$300
#56
Honda-Tech Member
Join Date: Nov 2004
Location: san leandro, ca, united states
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
COMPLETE MSD Distributorless igntion setup for sale:
Selling the following:
MSD DIS 4 (Paid $250)---$200 selling price
MSD CPC convertor module brand new (Paid 78) will sel for $60
MSD spark plug wires (all new, paid 100 for parts) will sell all 4 for $80
MSD Deutsch plug brand new, paid 22.00...will sell for $20
prices do not including shipping or paypal fees.
email: skippworks@gmail.com for details. Willing to trade for functional K pro, and I will put some money on top if anyone is intersted.
http://www.flickr.com/photos/57594753@N07/5552854717/http://www.flickr.com/photos/57594753@N07/5552854717/ by http://www.flickr.com/people/57594753@N07/, on Flickr
http://www.flickr.com/photos/57594753@N07/5553435126/http://www.flickr.com/photos/57594753@N07/5553435126/ by http://www.flickr.com/people/57594753@N07/, on Flickr
http://www.flickr.com/photos/57594753@N07/5553433272/http://www.flickr.com/photos/57594753@N07/5553433272/ by http://www.flickr.com/people/57594753@N07/, on Flickr
http://www.flickr.com/photos/57594753@N07/5555244452/http://www.flickr.com/photos/57594753@N07/5555244452/ by http://www.flickr.com/people/57594753@N07/, on Flickr
MSD DIS 4 (Paid $250)---$200 selling price
MSD CPC convertor module brand new (Paid 78) will sel for $60
MSD spark plug wires (all new, paid 100 for parts) will sell all 4 for $80
MSD Deutsch plug brand new, paid 22.00...will sell for $20
prices do not including shipping or paypal fees.
email: skippworks@gmail.com for details. Willing to trade for functional K pro, and I will put some money on top if anyone is intersted.
http://www.flickr.com/photos/57594753@N07/5552854717/http://www.flickr.com/photos/57594753@N07/5552854717/ by http://www.flickr.com/people/57594753@N07/, on Flickr
http://www.flickr.com/photos/57594753@N07/5553435126/http://www.flickr.com/photos/57594753@N07/5553435126/ by http://www.flickr.com/people/57594753@N07/, on Flickr
http://www.flickr.com/photos/57594753@N07/5553433272/http://www.flickr.com/photos/57594753@N07/5553433272/ by http://www.flickr.com/people/57594753@N07/, on Flickr
http://www.flickr.com/photos/57594753@N07/5555244452/http://www.flickr.com/photos/57594753@N07/5555244452/ by http://www.flickr.com/people/57594753@N07/, on Flickr
Last edited by speedtec11s; 04-16-2011 at 03:01 PM. Reason: some items sold
#57
Re: April FS Thread
Raising money for our next project. We have a brand new Franks custom fiberglass 3 piece. I have to disclose, yes the wheels are sunk in but in order for this to look rightyou have to have a wheel with a deeper offset. Like the bogarts. And these are typically cut for 26's but if you look on the bumper in the wheel well area he left a section for 24's that you can cut out for 26s if you choose. $600 for the front end
we also have a gsr transmission. no grinds or scratches. excellent condition. $400 stock diff in it
we also have a gsr transmission. no grinds or scratches. excellent condition. $400 stock diff in it
#59
Honda-Tech Member
Re: April FS Thread
Brand new Version 2 AEM EMS's 30-6040 obd1
$950 shipped (non-negotiable price not in a rush to sell thank-you)
I do accept PayPal payment with my verified PayPal address (+3% fee unless you want to use the gift option) or cash for pickup. Locaded in Pomona, ca Thank-you.
$950 shipped (non-negotiable price not in a rush to sell thank-you)
I do accept PayPal payment with my verified PayPal address (+3% fee unless you want to use the gift option) or cash for pickup. Locaded in Pomona, ca Thank-you.
#60
Honda-Tech Member
Re: April FS Thread
weld magnums 15x8 4" backspace with toyo 25x9x15 tires. used. good condition.
800.00 comes with full set of lug nuts. neo chrome. 150 dollar value.
burns 4" race muffler. 120.00
moroso hd master cut off switch 25.00
full strange suspension for eg/dc chassis. custom spring rates. 900.00
email me for quick response. first come first serve.
info@fcsfab.com
800.00 comes with full set of lug nuts. neo chrome. 150 dollar value.
burns 4" race muffler. 120.00
moroso hd master cut off switch 25.00
full strange suspension for eg/dc chassis. custom spring rates. 900.00
email me for quick response. first come first serve.
info@fcsfab.com
#61
Honda-Tech Member
Re: April FS Thread
__________________________________________________ _______
1992 honda civic si racecar chassis
***asking 7500.00***
(this does not include suspension/wheels/drivetrain)
* 10pt chromoly cage with parachute mount/wheelie bar hookups
* Custom aluminum dash, door panels and interior panels
* chromoly wheelie bar with wheeleze wheels
* stroud window net
* omp race seat
* FAL lexan windows (race kit) * Lexan sunroof *
* MB Products fiberglass doors with chromoly frames and lexan window with stainless allenhead bolts/nylock nuts
* Tube front end with midplate & chromoly timing belt side mount
* clearanced for 28" tires
* Acura sundance gold pearl paintjob
* entire chassis was sand/bead/media blasted before paint
* spare tire well is cut out, with flat aluminum panel covering
__________________________________________________ _______________
__________________
Acura Integra race chassis 5500.00
this is pretty much a shell at this point. i bought the car, added a few things and never got to run it. the jojo front, the hood & the trunk are in primer, ready for paint. the car has a 10 pt chromoly cage not sure if the certification is still good)
__________________________________________________ ______
MOTEC M400 engine harness
built by me, with tefzel wire/raychem dr-25, deutsch connectors etc. 1200.00
the harness was originally used with an aem box, it now is used on a motec m400. you will need to purchase a motec UTC (it is not included w/ the harness)
this is the harness before i added in the extra 4 injectors (it now has 12injectors )
__________________________________________________ ______________________________
Front mount turbo manifold
950 shipped
*304 sch 10 stainless - tig welded
*t4 flanged
* flanged for tial MVS wastegates
*includes wastegate dumps and exhaust pipe
__________________________________________________ _
Front mount B series T4(split housing) turbo manifold
- 304 stainless, tig welded by Jm Fabrications
- tial 44mm wastegate flanges[/B]
- has extra mount for support
- 800.00 + shipping
__________________________________________________ _
JMF intake manifold for p72 head (GSR) 750.00 + shipping
setup for 12 injectors & wilson 105mm throttle body
*includes wilson throttle body
__________________________________________________ __
Garrett Gt4202R Turbo
- 74mm
-1.10 a/r exhuast housing
- ball bearing
-water cooled
- includes inlet restricter flange
- includes compressor and turbine discharge flange and v band clamps
- does not include air fitting
1250.00 + shipping
__________________________________________________ __
JM-Fabrications / Spearco water to air intercooler
* 4-inch v band inlet and outlet
* -12AN water outlet fittings
* -12AN drain
550.00 Shipped
__________________________________
All associated lines/fittings
* 12an fittings on tank & intercooler
* 3/4 shut off valve on tank for drain
* hose is 3/4 inch
85.00 shipped
_________________________________
Hydraflow clamps 225.00 each
* fits 4inch tube
* i have 4 clamps
______________________________________
* OMC coils (coil on plug) with bracket
- fits b series vtec heads
225.00 + shipping
_________________________________________________
* eibach front and rear sway bar kit with endlinks etc, i belive its everything for installation. 250.00
__________________________________________________ _______
Nitro drive line
4500.00 + shipping
this is probably the best driveline you can get for a honda.
lug pattern is 5x4.75
includes
* strange coilovers
* 2inch chromoly dropped spindles
* 2inch taller chromoly shock forks
* CNC brake calipers/rotors
* spool w/ large bearings & seals
* axles & half shaft
* skunk2 upper contol arms
* competition eng tie rods
__________________________________________________ _______
Weld wheels
*15x10
- 5x4.75 lug pattern
- 5inch backspace
600 + shipping
*15x8
- 5x4.75 lug pattern
-4inch backspace
500.00 + shipping
* weld spindle mount skinnies
* 5 star (anglia spindle)
650.00
*holes (strange spindle)
800.00 w/ the brand new tires on them
__________________________________________________ _______
Nuformz rear suspension
includes
*strange struts
* brakes/control arms/hardware & brackets
2800.00 + shipping
3500.00 shipped including spindle mount wheels w/ brand new tires)
__________________________________________________ ____________
Liberty Transmission w/billet bellhousing and engine plate
5500.00 + shipping
__________________________________________________ ______________
Chromoly straight axle 1250.00 + shipping
* anglia spindle
*includes aerospace components brake kit
__________________________________________________ _____________
Progress rear shocks (were used with straight axle)
300.00 + shipping
1992 honda civic si racecar chassis
***asking 7500.00***
(this does not include suspension/wheels/drivetrain)
* 10pt chromoly cage with parachute mount/wheelie bar hookups
* Custom aluminum dash, door panels and interior panels
* chromoly wheelie bar with wheeleze wheels
* stroud window net
* omp race seat
* FAL lexan windows (race kit) * Lexan sunroof *
* MB Products fiberglass doors with chromoly frames and lexan window with stainless allenhead bolts/nylock nuts
* Tube front end with midplate & chromoly timing belt side mount
* clearanced for 28" tires
* Acura sundance gold pearl paintjob
* entire chassis was sand/bead/media blasted before paint
* spare tire well is cut out, with flat aluminum panel covering
__________________________________________________ _______________
__________________
Acura Integra race chassis 5500.00
this is pretty much a shell at this point. i bought the car, added a few things and never got to run it. the jojo front, the hood & the trunk are in primer, ready for paint. the car has a 10 pt chromoly cage not sure if the certification is still good)
__________________________________________________ ______
MOTEC M400 engine harness
built by me, with tefzel wire/raychem dr-25, deutsch connectors etc. 1200.00
the harness was originally used with an aem box, it now is used on a motec m400. you will need to purchase a motec UTC (it is not included w/ the harness)
this is the harness before i added in the extra 4 injectors (it now has 12injectors )
__________________________________________________ ______________________________
Front mount turbo manifold
950 shipped
*304 sch 10 stainless - tig welded
*t4 flanged
* flanged for tial MVS wastegates
*includes wastegate dumps and exhaust pipe
__________________________________________________ _
Front mount B series T4(split housing) turbo manifold
- 304 stainless, tig welded by Jm Fabrications
- tial 44mm wastegate flanges[/B]
- has extra mount for support
- 800.00 + shipping
__________________________________________________ _
JMF intake manifold for p72 head (GSR) 750.00 + shipping
setup for 12 injectors & wilson 105mm throttle body
*includes wilson throttle body
__________________________________________________ __
Garrett Gt4202R Turbo
- 74mm
-1.10 a/r exhuast housing
- ball bearing
-water cooled
- includes inlet restricter flange
- includes compressor and turbine discharge flange and v band clamps
- does not include air fitting
1250.00 + shipping
__________________________________________________ __
JM-Fabrications / Spearco water to air intercooler
* 4-inch v band inlet and outlet
* -12AN water outlet fittings
* -12AN drain
550.00 Shipped
__________________________________
All associated lines/fittings
* 12an fittings on tank & intercooler
* 3/4 shut off valve on tank for drain
* hose is 3/4 inch
85.00 shipped
_________________________________
Hydraflow clamps 225.00 each
* fits 4inch tube
* i have 4 clamps
______________________________________
* OMC coils (coil on plug) with bracket
- fits b series vtec heads
225.00 + shipping
_________________________________________________
* eibach front and rear sway bar kit with endlinks etc, i belive its everything for installation. 250.00
__________________________________________________ _______
Nitro drive line
4500.00 + shipping
this is probably the best driveline you can get for a honda.
lug pattern is 5x4.75
includes
* strange coilovers
* 2inch chromoly dropped spindles
* 2inch taller chromoly shock forks
* CNC brake calipers/rotors
* spool w/ large bearings & seals
* axles & half shaft
* skunk2 upper contol arms
* competition eng tie rods
__________________________________________________ _______
Weld wheels
*15x10
- 5x4.75 lug pattern
- 5inch backspace
600 + shipping
*15x8
- 5x4.75 lug pattern
-4inch backspace
500.00 + shipping
* weld spindle mount skinnies
* 5 star (anglia spindle)
650.00
*holes (strange spindle)
800.00 w/ the brand new tires on them
__________________________________________________ _______
Nuformz rear suspension
includes
*strange struts
* brakes/control arms/hardware & brackets
2800.00 + shipping
3500.00 shipped including spindle mount wheels w/ brand new tires)
__________________________________________________ ____________
Liberty Transmission w/billet bellhousing and engine plate
5500.00 + shipping
__________________________________________________ ______________
Chromoly straight axle 1250.00 + shipping
* anglia spindle
*includes aerospace components brake kit
__________________________________________________ _____________
Progress rear shocks (were used with straight axle)
300.00 + shipping
#62
Re: April FS Thread
FOR SALE:
TURBO: PRECISION CUSTOM 72MM GT4202R 1.44 EXHAUST HOUSING.HAS ONLY ABOUT 20 PASSES! $1850 SHIPPED
INJECTORS: EFI WIZARD 2000CC FOR K SERIES. ONLY USED FOR 1 DYNO SESSION! $750 SHIPPED
IF USING PAYPAL, PLEASE ADD 3%
THANKS
MAT KELLER
TURBO: PRECISION CUSTOM 72MM GT4202R 1.44 EXHAUST HOUSING.HAS ONLY ABOUT 20 PASSES! $1850 SHIPPED
INJECTORS: EFI WIZARD 2000CC FOR K SERIES. ONLY USED FOR 1 DYNO SESSION! $750 SHIPPED
IF USING PAYPAL, PLEASE ADD 3%
THANKS
MAT KELLER
#63
Honda-Tech Member
Join Date: Oct 2007
Location: warner robins, ga, u.s.
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
Im selling my moroso oil pan
- Fully fabricated all aluminum-Billet Rail
- Two 1/2” NPT bungs for plumbing turbo oil line and temperature sender plugs
- Machined pickup tube with 12AN female fitting
- Magnetic drain plug with extra washer
- Two trap door baffles keeps oil contained in pickup area
- Integral sump tray prevents oil from sloshing on to crank
Im asking $250 O.B.O.
Feel free to text or call (478)-960-2205.
Moroso oil pick up tube
- Fully fabricated all aluminum-Billet Rail
- Two 1/2” NPT bungs for plumbing turbo oil line and temperature sender plugs
- Machined pickup tube with 12AN female fitting
- Magnetic drain plug with extra washer
- Two trap door baffles keeps oil contained in pickup area
- Integral sump tray prevents oil from sloshing on to crank
Im asking $250 O.B.O.
Feel free to text or call (478)-960-2205.
Moroso oil pick up tube
#65
Honda-Tech Member
Join Date: Nov 2007
Location: EastCoast VA.
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
FS: Precision PT6776 BB turbo with T4 flange! Turbo made 738whp on my stock block k20 at 28psi.
Asking:$800 shipped + paypal. o.b.o
Located: Fredericksburg VA 22407.
Asking:$800 shipped + paypal. o.b.o
Located: Fredericksburg VA 22407.
#66
Honda-Tech Member
Join Date: Aug 2004
Location: east coast performance and tuning, jacksonville, nc
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
just seeing if anyone would interested in a ls vtec 12 to 1 motor. fresh rebuild and new gaskets bearings and seals. upgrade rod bolts, headstuds and mainstuds. pr3 pistons, b16 head and ls bottomend. looking 1800.00 obo plus shipping.
#67
Honda-Tech Member
Join Date: Aug 2006
Location: Nevada
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
Custom SSR 4-2-1 big tube race header
- megaphone
- reverse cone
- has o2 bung
- perfect condition no dents, dings, etc...
This header helped me make 235whp/168tq on a 100% stock h22a block with a small tb and old school intake manifold.
$1,050 OBO
Pics:
- megaphone
- reverse cone
- has o2 bung
- perfect condition no dents, dings, etc...
This header helped me make 235whp/168tq on a 100% stock h22a block with a small tb and old school intake manifold.
$1,050 OBO
Pics:
#68
Re: April FS Thread
Just want to start the thread. going to post pics after i pull the pump off.. i have a weldon 2025DB -12in -10 out in real good condition.. pretty much just need to upgrade.. pump runs great without any issues.
will also come with a -12 prefilter
Looking to get $650.00 shipped.
will also come with a -12 prefilter
Looking to get $650.00 shipped.
Last edited by ek20turbo; 04-12-2011 at 06:34 PM.
#69
Honda-Tech Member
Join Date: Mar 2011
Location: Orlando, Fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
Up for sale i got a couple things that im not using for my build. I have 1 brand new walbro gss342 and 1 used walbro gss341. Used precision turbo vband clamp.
Pm me, email me or txt me for more info:
Rposti06@gmail.com/ 407-719-1089
New walbro gss342 $78
Used walbro gss341 $50
Used Precision 2.75 vband clamp(6262,6265,5857, etc) $35
Pm me, email me or txt me for more info:
Rposti06@gmail.com/ 407-719-1089
New walbro gss342 $78
Used walbro gss341 $50
Used Precision 2.75 vband clamp(6262,6265,5857, etc) $35
#70
Honda-Tech Member
Join Date: Jun 2007
Location: Elyria, Ohio
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
I have a GSR gearset that i took out of my car before i upgraded to the Mfactory set, everything looks perfect. Has about 30,000 on it. Looking to get 400.00 shipped or just shoot me an offer. Thanks. I have plenty of picture if you need more.
#71
Honda-Tech Member
Join Date: Nov 2004
Location: Hamden, CT, USA
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
I have a spec twibn disc for sale. Still have a ton of meat left on it, i might have 10 pass on it. $800 obo plus shipping
I'm selling parts for the h. I'm selling a Moroso external oil pump set-up it has everything for it except for the lines for the output of the pump, I'm looking to get $1600 or best offer for the whole set-up. I have 2 sets of cams gears and they are the new style aem 5 bolt gears and the unorthodox racing gears and looking to get $125 for each set. I have a vibrant timing belt tensioner I'm looking to get $105 for it to yur door. I also have a h22 head that was port and polished with alot of work done to it for turbo appication with a full supertech vavletrain with 1mm oversize vavles on both sides along with a venom intake manifold with match porting done and also can execpt a mustang tb, looking to get $1250 obo. Pm me and I will send pics if needed.
I'm selling parts for the h. I'm selling a Moroso external oil pump set-up it has everything for it except for the lines for the output of the pump, I'm looking to get $1600 or best offer for the whole set-up. I have 2 sets of cams gears and they are the new style aem 5 bolt gears and the unorthodox racing gears and looking to get $125 for each set. I have a vibrant timing belt tensioner I'm looking to get $105 for it to yur door. I also have a h22 head that was port and polished with alot of work done to it for turbo appication with a full supertech vavletrain with 1mm oversize vavles on both sides along with a venom intake manifold with match porting done and also can execpt a mustang tb, looking to get $1250 obo. Pm me and I will send pics if needed.
#72
Honda-Tech Member
Join Date: May 2008
Location: Culpeper, va, US
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
I have a set of ferrea dual valvesprings retainers and keepers used for one season asking $250.
Moroso 5.5qt oil pan lookin to get 150 its 2.5years old
Crower stg2 boost cams $200obo made really good power on a stock gsr 520whp on pump gas
Moroso 5.5qt oil pan lookin to get 150 its 2.5years old
Crower stg2 boost cams $200obo made really good power on a stock gsr 520whp on pump gas
#74
Honda-Tech Member
Join Date: Nov 2007
Location: las vegas
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
MSD 7AL-2 Pro Race Ignition MSD Pro Power HVC Coil
both
both still work also will give the wire from coil to dizzy and all the wire to wire it up
550 shipped
both
both still work also will give the wire from coil to dizzy and all the wire to wire it up
550 shipped
#75
Honda-Tech Member
Join Date: Oct 2002
Location: Winchester, VA
Posts: 3,068
Likes: 0
Received 0 Likes
on
0 Posts
aem injector driver box and 1050 ems box
Name: Donnie
Location: Winchester, VA
Means of contact: pm
Price: $180 for the injector driver and $700 for the ems shipped
Description: i have a used aem injector driver box that came off my old hatch when i had 1600cc injectors on it. box comes with wiring diagram and all instructions. bought this off dave fry a couple of years ago
Description: i have a used aem 1050 box that came out of my 00 si for sale.
This Ecu works with the following cars:
1998-1999 CL M/T
2000-2001 INTEGRA M/T
1998-2002 ACCORD DX; EX; LX; SE; VALUE Package with M/T
1999-2000 CIVIC DX; EX; LX; SI M/T
Location: Winchester, VA
Means of contact: pm
Price: $180 for the injector driver and $700 for the ems shipped
Description: i have a used aem injector driver box that came off my old hatch when i had 1600cc injectors on it. box comes with wiring diagram and all instructions. bought this off dave fry a couple of years ago
Description: i have a used aem 1050 box that came out of my 00 si for sale.
This Ecu works with the following cars:
1998-1999 CL M/T
2000-2001 INTEGRA M/T
1998-2002 ACCORD DX; EX; LX; SE; VALUE Package with M/T
1999-2000 CIVIC DX; EX; LX; SI M/T