lindseyhunt1090

Hey. Just wondering if anyone has turned launch control into rolling antilag on the s300. Just wondering what you settings and setup is. I'm interested in getting this to work properly.

SwappedTURBOegg

i have off brake switch brake boosting hard works better iw as on 67mm laggy holset

lindseyhunt1090

Explain that a bit?

SwappedTURBOegg

set launch controll at x rpm use brake switch for imput on no wiring required you can use the hondata to do this. drag brake go wot will sit at x rpm let off brake and take off. i never tried to brake too hard and do it as i was not sure if any damage would take place but that is how its set up.

lindseyhunt1090

hmm never thought to try that. is that foot brake or e brake? i just used the ac switch to test it. going to switch to something more safe. its a game changer.

i usually dont start pulling good till 6k. i set mine at 5 k and it just goes. heres my first attempt. bbg kinda set, first try with the rolling anti. once its set up good it will be deadly!

this is about 500 tapering to 600whp with a 245 55 60. this is hooking.

SwappedTURBOegg

the brake pedal. have you ever tried brake boosting?

lindseyhunt1090

Oh yea. That's how I used to rolling launch before. Just brake boost. But I can only make 5-6 psi doing that. This I hold for a second and I'm making 12+ easy.

rawperformance1

The problem with Hondata and rolling anti-lag is if you use the parameters provided in the software, you can only use one set RPM for the cut, so you'll have to hit whatever RPM you have set in the software before it will cut while rolling. With software like Neptune, you can use the TPS engagement and cut at any RPM you want.

tepid1

Looks violent. Your drive line is going to love that....

lindseyhunt1090

Yea I'm sure its hard on stuff lol. But that's part of the fun and games. I have a fresh cuffed gsr trans. Should be ok for the season.

SwappedTURBOegg

i also tried setting 2step at limiter and dumpped the clutch off limiter in third that worked the best. also toasted some main bearings doing it lol

lindseyhunt1090

OMG! lol that would either be awesome or terrible lol

SwappedTURBOegg

it was an absolute beast from a 70 roll hahaha

TeranceFL

Just added you on FB, wrote a comment on YT

DA-NINE

Rob from IMW has his setup this way for slipstream roll race events

here you go

https://honda-tech.com/forced-induct...k-pro-3222267/

gringotegra

I dont know about you guys but i can brake boost 25psi in my car! lol Normally its too much for the street in 3rd gear but it sure is fun!

I set rolling anti lag up in my car off the E-brake switch. It worked, but i still think brake boosting worked better.

lindseyhunt1090

it depends on what kinda rpm your at when your trying to launch. for a 60 roll im only at 5k. if i do brake boosting at like 6500 i can make a lot more