munster87

Time to save up for a dogbox?

Steeve_Civic

Which tires are you running?

civicboy07

Lol I've thought about it but don't feel like dropping that much on a trans for this really.

civicboy07

M&h 235/60/15s. They are some sticky tires and definitely hook better than the old et streets I had but I think they are causing too much stress on the stock gears

carbon fiber coupe

iTrader: (2)

looks good man!!!

Steeve_Civic

Yes I think so!
Bias tires not drag radial?

civicboy07

Thanks man

civicboy07

They are the bias tires

civicboy07

Got a new gsr trans installed and we touched the tune up last night and also got the aem drag anti lag set up and boost by speed.

Steeve_Civic

Good, it is the 3rd gearbox?
How Much pressure in bias tires did you put in?

civicboy07

4th gear broke on the first trans and I just put a new 4th gear set in and then broke 3rd and now on the gsr trans with no cuff instead of the ls trans. And I was running around 25psi but just dropped them to 18psi after some tuning last night. Started to just roast the tires at 140 in 4th.

Steeve_Civic

Very hard work, best of lucks...
Keep us posted!
Should go at the track!

civicboy07

Going to the track tomorrow and going to see how the radials do.

civicboy07

Well since the gsr trans has been put in, it's been holding great. We also turned boost up to 27psi now. Figured I'd share some pictures of it. Took best Honda/Acura at a car show last weekend and tomorrow we will be going to the track.



Also picked up a new toy

civicboy07

Headed up to the track today. Going to see how these m&h radials do on a prepped track.

civicboy07

Well made it out to the track but it was so busy I could only get 2 passes in. This was the first time I've had the car to the track, so still have some stuff to work out.

We were thinking the car would have major traction issues with how cold it's been here and on the street tires, so we had lowered the boost down in each gear and launch control was set kind of low for the track. Ended up just dead hooking and bogging in 1st and just hooked every gear. Unfortunately Jason couldn't make it out so couldn't make any adjustments to the car but still managed a 11.5 pass at 132mph.

Here is a video of the pass. sorry for the quality, my buddy recored it with his phone.

ekcivicf20b

That's right. Getting it man! Good work.

civicboy07

Thanks man. Hopefully I can get her in the 10s next and with the radials.

v8killaz

sucks

civicboy07

I should have just went to my local track, might have got some passes actually. Still not too bad for 600whp on some radials but next time ill bring the slicks

v8killaz

slicks for sure. 10's next time
car sounds sweet

civicboy07

Thanks

civicboy07

Got the car out this weekend to play with some bikes. Still only on 24-25psi. One is a zx14 on nitrous and the other is a 1300 busa.

civicboy07

Well I'm going to be selling the hatch shell along with some other things to go bigger and better. Here is a sneak peak at the new shell


I'll be making a new build thread once I get things going on it.

v

Did you have to crank the coilovers all the way up to get those 235's to fit? I'm thinking of stepping up to the 235/60 radials for my re-build. Car looks great, pulls pretty strong to hang with a 'busa.