10.43 - 50 trim t3/t4, d16y8, stock sleeve insnity
09-10-2011, 06:41 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Posts: 2,946
Likes: 0
Received 0 Likes
on
0 Posts
10.43 - 50 trim t3/t4, d16y8, stock sleeve insnity
my friend darin and his car we built just ran a 10.43 @ 133 on a 50 trim t3/t4 and a vitara d16y8 setup on stock sleeves. 50 trim d series world record which is pretty impressive in itself on the small turbo.
gearing was terrible with the 24.5's and stock gears but she still moved out well.
we discovered a transmission issue after this pass.
slip break down like this
60ft - 1.666
330 - 4.506
1/8 - 6.794
mph - 109.21
1000 - 8.762
1/4 - 10.437
mph - 133.72
http://www.youtube.com/watch?v=eWXJbjyQfgw
gearing was terrible with the 24.5's and stock gears but she still moved out well.
we discovered a transmission issue after this pass.
slip break down like this
60ft - 1.666
330 - 4.506
1/8 - 6.794
mph - 109.21
1000 - 8.762
1/4 - 10.437
mph - 133.72
http://www.youtube.com/watch?v=eWXJbjyQfgw
Last edited by welfarepc; 09-11-2011 at 12:08 PM.
09-10-2011, 07:40 PM
#4
Honda-Tech Member
Re: 10.43 - 50 trim t3/t4, d16y8, stock sleeve insnity
was that an ebay turbo???
dam really impressive...
what numbers did it make on the dyno?
and how many cc injectors are you guys using?
dam really impressive...
what numbers did it make on the dyno?
and how many cc injectors are you guys using?
Trending Topics
09-11-2011, 12:38 AM
#14
Honda-Tech Member
iTrader: (1)
Join Date: Nov 2009
Location: California
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: 10.43 - 50 trim t3/t4, d16y8, stock sleeve insnity
I think its on C16 gas, Bisi 3.6 cam? Its an EF hatch, good **** Darrin and Dan!
Last edited by Khnemu; 09-11-2011 at 01:15 AM.
09-11-2011, 03:55 AM
#15
Honda-Tech Member
Re: 10.43 - 50 trim t3/t4, d16y8, stock sleeve insnity
Naw, Speed Factory doesnt have the record for stock sleeves (I think they went 10.6 or 10.5 stock sleeves). My buddy Paul (xohcef) went 10.22 cracking the sleeve and hitting the brakes at the 1000'. Stock sleeved Vitara/Eagle build.
https://honda-tech.com/forums/drag-racing-36/sohc-personal-best-record-2958639/
Good job to Darin and Dan though!!!! Keep forgetting youre on that little turbo!
https://honda-tech.com/forums/drag-racing-36/sohc-personal-best-record-2958639/
Good job to Darin and Dan though!!!! Keep forgetting youre on that little turbo!
09-11-2011, 09:07 AM
#16
Honda-Tech Member
Join Date: Feb 2009
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Re: 10.43 - 50 trim t3/t4, d16y8, stock sleeve insnity
set up is:
a6/y8
fjt rods
vitara 75mm slugs
bisi 3.6 cam
Bullseye power t3/t40e 50 trim .70a/r
c16
precision 1000cc inj
30psi
MT 24.5x8x13
si cable trans w/quafie
stock ultra 8 axles
no dyno time just track tuned by welfarepc
09-11-2011, 12:07 PM
#20
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Posts: 2,946
Likes: 0
Received 0 Likes
on
0 Posts
Re: 10.43 - 50 trim t3/t4, d16y8, stock sleeve insnity
i think its more than that now with the roll bar installed.
ya i thought i remembered something like that. we still did pretty good for a 50 trim i must say!
Naw, Speed Factory doesnt have the record for stock sleeves (I think they went 10.6 or 10.5 stock sleeves). My buddy Paul (xohcef) went 10.22 cracking the sleeve and hitting the brakes at the 1000'. Stock sleeved Vitara/Eagle build.
https://honda-tech.com/forums/showthread.php?t=2958639
Good job to Darin and Dan though!!!! Keep forgetting youre on that little turbo!
https://honda-tech.com/forums/showthread.php?t=2958639
Good job to Darin and Dan though!!!! Keep forgetting youre on that little turbo!
ya i thought i remembered something like that. we still did pretty good for a 50 trim i must say!
09-11-2011, 08:30 PM
#23
Honda-Tech Member
