***2011 OUTLAW/FWD REBUILD THREAD****
08-31-2011, 05:02 PM
#251
Honda-Tech Member
Join Date: Jan 2010
Location: eatonton ga
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
I pressure test all the valve jobs On a fixture plate and put air into the chamber like a
leak down tester
I took pictures of this head when I did that operation
Anytime Im worrired about someone bending valves putting Vtec killers in
I take pictures and send them to show the head was sealing when it was assembled
looks pretty sealed up too me
leak down tester
I took pictures of this head when I did that operation
Anytime Im worrired about someone bending valves putting Vtec killers in
I take pictures and send them to show the head was sealing when it was assembled
looks pretty sealed up too me
08-31-2011, 05:51 PM
#252
Honda-Tech Member
Join Date: Nov 2008
Posts: 1,937
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
Was the shrader valve in the compression tester.... When you leaked it down...where was the air coming from..... Take the cams out and leak it down to know for sure its not something else
08-31-2011, 05:54 PM
#253
Honda-Tech Member
Join Date: Nov 2008
Posts: 1,937
Likes: 0
Received 0 Likes
on
0 Posts
08-31-2011, 06:26 PM
#254
Honda-Tech Member
Thread Starter
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
The head has been sent out to brad and he will take care of it. Was on the phone with him for about an hour today, cool as dude
08-31-2011, 06:30 PM
#255
Honda-Tech Member
Thread Starter
08-31-2011, 06:34 PM
#256
Honda-Tech Member
Thread Starter
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
Thanks to Wil for the clean *** new wheels, I think I might just keep them polished, goes really good with the blue. 13x10 5'' bs
08-31-2011, 07:09 PM
#257
Guest
Posts: n/a
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
Keep em polished until they get dirty lol
They look great, was just about to reply to your PM and figured I'd troll first. Glad to see things are moving, Brad will do ya right. He kept that hammered D-head I had trucking time after time lol
They look great, was just about to reply to your PM and figured I'd troll first. Glad to see things are moving, Brad will do ya right. He kept that hammered D-head I had trucking time after time lol
09-01-2011, 05:09 AM
#261
Honda-Tech Member
Thread Starter
09-01-2011, 05:31 AM
#263
Honda-Tech Member
Thread Starter
09-01-2011, 06:47 AM
#264
Honda-Tech Member
Join Date: Jan 2003
Location: Charlotte, NC, USA
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
09-01-2011, 01:15 PM
#265
Honda-Tech Member
09-01-2011, 01:39 PM
#266
Honda-Tech Member
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
i love to see tepids car i always hear all this **** about what your doing but it just might be the real ghostrider. lol
09-02-2011, 06:24 AM
#267
Honda-Tech Member
09-08-2011, 10:08 AM
#268
Honda-Tech Member
Join Date: Jan 2003
Location: Charlotte, NC, USA
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
Found the problem ...
pulling it out of the box and looking in the ex ports ...
it appears ..
2 of your ex valves are Bent all to hell ..
I was going to put it on my leak down fixture but no need too the valves are not sitting flat
in the chamber .. Something whacked them hard I would look @ your piston ..
here are a few pics ...
09-08-2011, 12:24 PM
#272
Honda-Tech Member
Join Date: Jan 2003
Location: Charlotte, NC, USA
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
I only saw the marks on that one hole ..
09-08-2011, 03:27 PM
#275
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2004
Location: FL, U.S.A.
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***2011 OUTLAW/FWD REBUILD THREAD****
Did the cams get degree in properly? i had the same issue but i caught it during mock up. I had 1mm over valves on intake and exhaust and i had to back the intake cam -4 and the ex +2(going off of my memory) so they wouldn't touch. Maybe your timing belt jumped?