Tru_Shine

I took a trip back up to Healthy Balance Meals up in Sevierville TN to take on the 07 Z06 vette. These people are great! and their food is even better! When I got there the weather wasn't the greatest but I was crossing my fingers that the sun was going to pop out!

This was my First Full mobile job with my new trailer, so I was very excited to try out my whole new set up.

It took me about 30 min to learn to park this crazy thing but I finally got it!




I got started by letting the Chemical Guys "Diablo Wheel Gel" dwell for a good 10 minutes, this stuff is completely PH balanced and wont hurt any type of wheel surface or bake pads, but yet it eats away brake dust like no other!

The barrels were really black, the wheels really should have been removed and cleaned individually and clayed and steam cleaned, but the owner didn't want to go to that extent





So I just gave it a real good scrubbin!





I knocked all the heavy stuff off with my Troybilt pressure washer and began my Single bucket w/ Grit guard and some Joy dish detergent to strip all previous wax off of the car.









The exhuast tips were caked on and stained with black soot. I used P21s Polishing w/ #0000 steel wool to scrub it all of to a nice polished shine










After the Wash I began to claybar the car with my automagic blue fine clay and some diluted ONR as clay lube.





The car had really bad Water etching from numerous times of owner letting the car air dry in the sun











Here is a 50/50 test spot of the paint surface after M105/cyan hydrotech pad via FLEX 3401 seen with my Brinkman Duel xenon swirl finder light.






Now She's all taped up ready for some love!



I decided to use the Rotary with Meguiars W66 backing plate to speed up the process



Here is another 50/50 using the Brinkmans Duel Xenon Swirl Finder.





Hopefully I'll be getting this car to detail later on down the road



This is me trying out the Meguiars G110v2, I love this thing!







Polished out with M205/Tangerine Hydrotech pad via FLEX 3401



The pollen started getting out of control and we had to bring the car inside to finish it down without marring up the finish with pollen scratches

So after all the polish was completed I applied Black Fire Wet diamond with the Lake country Blue Finishing pad Via G110v2





After letting it cure, I removed the BFWD and here are some of the Final Shots!

























And here are some bonus pics












Thanks for viewing, have a blessed day!!!

juevi

That's some good work man.

builthatch

nice job and nice mobile setup! i'm entirely too **** to do remote work. it needs to come to me and be inside. i also like to have my water. but i appreciate that there are people out there like you who can make it work!

Tru_Shine

Thanks guys, I love what I do very much!

jdmdc2boi12

Awesome!!