Spoolin' Performance Turbo Setup, and more goodies!!
#1
Spoolin' Performance Turbo Setup, and more goodies!!
GM Boost Control Solenoid
Same function as the MAC solenoid
$15 Shipped
Fastline Oil Pan Baffle Set
Never installed. They have a little bit of surface rust, but 30 seconds with a scotch-brite pad before you weld them in will clean it up.
$20 Shipped
Boost Leak Tester
Custom made. Just hook it up to a compressor or air tank and listen for leaks. Includes cap for throttle body end of tubing. Made for a 3" compressor inlet, and a 2.5" charge pipe near the throttle body.
$25 Shipped
Earl's -4 Oil Feed Line
33 inches from fitting to fitting. Good for a larger feed line.
$15 Shipped
B16A3 Valve Cover
Painted red over the factory black wrinkle finish. Not pretty on the outside, but super clean on the inside.
$55 Shipped
D16 "HONDA" Valve Cover
Pretty clean, never painted or modified.
$40 Shipped
B16A3 Intake manifold and throttle body
Good condition. This is the manifold you need to pass the California BAR inspection with a B16 because it has the fitting for an EVAP purge valve. Sensors included are: MAP, TPS, IAT, FITV, IACV and lower brace bracket. No EVAP purge valve.
$85 Shipped
All prices are OBO. Contact Jon at (206)849-1123 with offers! Thanks for looking!
Same function as the MAC solenoid
$15 Shipped
Fastline Oil Pan Baffle Set
Never installed. They have a little bit of surface rust, but 30 seconds with a scotch-brite pad before you weld them in will clean it up.
$20 Shipped
Boost Leak Tester
Custom made. Just hook it up to a compressor or air tank and listen for leaks. Includes cap for throttle body end of tubing. Made for a 3" compressor inlet, and a 2.5" charge pipe near the throttle body.
$25 Shipped
Earl's -4 Oil Feed Line
33 inches from fitting to fitting. Good for a larger feed line.
$15 Shipped
B16A3 Valve Cover
Painted red over the factory black wrinkle finish. Not pretty on the outside, but super clean on the inside.
$55 Shipped
D16 "HONDA" Valve Cover
Pretty clean, never painted or modified.
$40 Shipped
B16A3 Intake manifold and throttle body
Good condition. This is the manifold you need to pass the California BAR inspection with a B16 because it has the fitting for an EVAP purge valve. Sensors included are: MAP, TPS, IAT, FITV, IACV and lower brace bracket. No EVAP purge valve.
$85 Shipped
All prices are OBO. Contact Jon at (206)849-1123 with offers! Thanks for looking!
Last edited by WrongWD; 08-23-2010 at 08:24 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ub3rn00ber
For Sale
4
01-22-2011 09:29 AM
ub3rn00ber
Classifieds: Forced Induction
1
01-20-2011 09:21 AM
WrongWD
For Sale
9
08-24-2010 07:56 AM
stealthmode62
Forced Induction
100
11-17-2005 01:59 AM