H22 parts inside, 87.5mm Mahle pistons, eagle rods, sleeved block
04-29-2013, 10:36 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Ohio
Posts: 3,360
Likes: 0
Received 0 Likes
on
0 Posts
H22 parts inside, 87.5mm Mahle pistons, eagle rods, sleeved block
We picked up a car that had this motor in it, previous owner had the engine built. He built this in 2006, drove it or about 600 miles, parked it in his garage for the next 7 years. We picked it up nd the wife drove it less than 1000 miles before it came apart. The motor spun a bearing on the dyno while being tuned and the wife has decided she doesn't want to rebuild it. So we are going to part it out. Here' what she has. Prices do not include shipping and paypal fees unless noted
$250shipped (Rods not for sale)
Contact: 740-814-3936 (text works best)
87.5mm 9:1 pistons
"These HON220445 parts are a 87.5mm bore size , they will measure under that since we have them made to fit a 87.5mm bore."- Mahle's email back to me
$250shipped (Rods not for sale)
Contact: 740-814-3936 (text works best)
87.5mm 9:1 pistons
"These HON220445 parts are a 87.5mm bore size , they will measure under that since we have them made to fit a 87.5mm bore."- Mahle's email back to me
Last edited by guy_from_nerk; 11-16-2013 at 08:48 PM.
05-02-2013, 07:50 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Ohio
Posts: 3,360
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 parts inside, 87.5mm Mahle pistons, eagle rods, sleeved block
I thought the same thing until I posted up in the drag racing section. They are def Darton Dry Sleeves. Most people are used to the look and style of MID's, it even had me questioning if the machine shop did the work they charged the previous owner for. The reciept is right above as well, in case you over looked that part 
Link I was referring to: https://honda-tech.com/forums/drag-racing-36/h22-sleeve-question-pics-inside-3134619/
I'll try getting some better pics this weekend of the block
Link I was referring to: https://honda-tech.com/forums/drag-racing-36/h22-sleeve-question-pics-inside-3134619/
I'll try getting some better pics this weekend of the block
Trending Topics
05-06-2013, 01:24 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Ohio
Posts: 3,360
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 parts inside, 87.5mm Mahle pistons, eagle rods, sleeved block
Block has 1500 miles on it. The only issue with it is the fact it spun a bearing on #4, so it'll need a crank. I was going to keep this and make a 14:1 e85 motor for the wife's eg but she doesn't want to build a motor, so no sense in letting this sit around being wasted.
06-17-2013, 03:59 AM
#14
Trial User
Join Date: Mar 2013
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 parts inside, 87.5mm Mahle pistons, eagle rods, sleeved block
06-17-2013, 04:00 AM
#15
Trial User
Join Date: Mar 2013
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 parts inside, 87.5mm Mahle pistons, eagle rods, sleeved block
can email at mrsolar.ms51@gmail.com
10-08-2013, 08:32 PM
#17
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Ohio
Posts: 3,360
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 parts inside, 87.5mm Mahle pistons, eagle rods, sleeved block
Bump from the dead, she wants to sell these asap so she can start buying new motor setup parts
Thread
Thread Starter
Forum
Replies
Last Post
slowcar
Northwest (Sales)
1
09-18-2006 05:51 AM
silentvoice19
Classifieds: Forced Induction
7
08-06-2006 05:17 PM