MrToasty

Time for me to get rid of the toy and fund my college tuition.

Mileage: 4,500 miles on all of the following:

Stock JDM B16A Head with B18B Block. (LS-VTEC)
• Engine bored .020”/0.5 mm
• Eagle Rods w/ ARP rod bolts
• CP Pistons - 9.0:1 Compression
• ACL Rod and Main Bearings
• Type-R Water and Oil Pump
• ARP Head Studs
• Cometic Head Gasket (Standard thickness)
• Golden Eagle LS/VTEC Conversion Kit
• Slowmotion Triple O-Ring Cam Seal
• Polished Slowmotion Spark Plug Wire Cover
• Competition Clutch and Pressure Plate
• Competition Pro-lite Flywheel (12lb)
• Custom Black w/ Silver Flake Du-Pont Powder Coated Valve Cover w/ Polished Emblems

All listed above for $2,250 w/ clutch/flywheel
Longblock w/out clutch/flywheel- $2,000
Clutch and flywheel combo - $350.00

Engine put out 350 whp and 295 wtq @ 18 psi

Engine was machined (and valve job) by Philips Racing Engines in Grove City and tuned (and partially built) by Corey Parish at Slowmotion Motorsports in Sunbury, OH.

No pings, knocks, oil leaks, oil burning. Engine is a champ!

I have many many pictures of the build, so just ask!

Also have a Seibon Carbon Fiber Hood (OEM Style) for sale - $300
(It has a dime-sized chip in the front edge of it, which could be covered with something, if you wanted to)

Text or call (leave voicemail) at 614-595-6430
or email at mjl44@uakron.edu

Name is Mike

Thanks!

MrToasty

More...

fv8s

BUMP

Rikter

no price?

MrToasty

Whoops! Sorry, looking for $3,999 for it all, including hood and a rear disc conversion.

Also, the truck has been sold.

hondapimp125

willing to part the s300?

MrToasty

Because the tune is already setup for the engine and turbo, i'd like to keep everything together, unless I don't get any offers. Ask me again in a couple weeks. =/

hrs-parker

iTrader: (3)

not to bad of a deal!!glws

JDMInteg96

ttt

MrToasty

Thanks for the bumps, all. Obviously, this is a good deal, and i'm looking for the buyer that recognizes how much time, effort and money they can save by buying everything at once, rather than the person that buys everything piece by piece over a long span of time (like I did), and spending much much more than 4,000 dollars for a turbo LSVTEC Swap.

Any questions folks, just ask.

jeffy

Any interest in trading this setup for a running driving 97 civic sedan 5spd with 116k miles. All original no mods at all!!!???

It's worth a try.

MrToasty

I have no use for two civics. Thanks though.

Really the only trades i'd be interested in would be something I could easily get $4,000 out of, or possibly a '07 + Harley (with cash on my end, of course) or maybe a waverunner...

integradc4_rg87

bump for you... im doing the same thing and its a PAIN!!!!!!!!!!!!!!!!!!!!!!!!!!!

Speed_1

You willing to part it out? Just really looking at the long block. LMK PM me.

MrToasty

You guys can PM me with whatever price you are willing to offer on the long block or the turbo kit, but let me know exactly what you want, and how much you are willing to pay for it. I probably won't accept the offer, because I'd still really like to sell this as a kit, but you never know...

Dc4beto

Would you be willing to sell the turbo kit?

Speed_1

PM'd

MrToasty

Make me an offer I can't refuse, and ... sure. The offer would have to, of course, compensate for the fact that I'd need to break up a perfect running swap just to part out, though.

MrToasty

Bump for a project you can start on Friday and be pushing 350 whp by the following day! C'mon people!

kmeister

will you sell all the turbo gear without the motor? if so ill take it, pm me a price for all the gear and the s300 ......and a seperate price for just all the gear without the s300

MrToasty

Price for everything (listed below) is still at a standing price of $3,999 cash. However, If you all are interested in taking this thing away from me in chunks, then pricing is...

KEEP IN MIND, PRICING IS JUST MY (IN MY OPINION, VERY) FAIR ESTIMATE OF WHAT THE USED PART IS WORTH AND WOULD SELL FOR ON ITS OWN. PARTS ARE NOT GOING TO BE SOLD INDIVIDUALLY. JUST LONGBLOCK, OR TURBO KIT, OR BOTH.

• Garrett T3/T04B .60A/R Compressor, .48A/R Turbine $300.00
• Stainless Oil Drain Line $25.00
• Lovefab Tubular Log Manifold $200.00
• Hondata S300 w/ Boost Control $550.00
• Hondata Solenoid for Boost Control -
• Tial 38mm Wastegate $200.00
• Large Bar/Plate Front Mount Intercooler (unknown brand) $150.00
• Custom Aluminum Intercooler Piping and High Quality T-Bolt Clamps $50.00
• Custom 2.5” Stainless Steel Down pipe/Flex Pipe/Dump Tube
• 3” Thermal Research & Development Cat-back Exhaust (stainless) $150.00
• Blitz Blow Off Valve $100.00
• Stainless Turbo Oil-Feed Line $15.00
• Precision 780cc injectors w/ resistor pack $200.00
• Walbro 255 LPH Fuel Pump $70.00
• 3-Bar GM MAP Sensor $60.00
• K&N Air Filter $10.00
• B&M Black-Out Water Temp Gauge $30.00
• AEM UEGO Wideband with Gauge $150.00
• Dual Gauge Pod (Around Instrument Cluster) $25.00
• Golden Eagle Vacuum Manifold $50.00
Total: $2,335.00

Your Price for the Turbo kit: $1,800.00

Stock JDM B16A Head with B18B Block. (LS-VTEC) $650.00
• Engine bored .020”/0.5 mm -
• Eagle Rods w/ ARP rod bolts $200.00
• CP Pistons - 9.0:1 Compression $350.00
• ACL Rod and Main Bearings $75.00
• Type-R Water and Oil Pump $75.00
• ARP Head Studs $75.00
• Cometic Head Gasket (Standard thickness) $60.00
• Golden Eagle LS/VTEC Conversion Kit $135.00
• C&R Aluminum Half Radiator $150.00
• Perma-Cool 1650 CFM Fan $100.00
• Slowmotion Triple O-Ring Cam Seal $15.00
• Polished Slowmotion Spark Plug Wire Cover $35.00
• Competition Clutch and Pressure Plate $350.00
• Competition Pro-lite Flywheel (12lb) -
• Custom Black w/ Silver Flake Du-Pont Powder Coated Valve Cover w/ Polished Emblems $75.00
• Distributor OBD2 $65.00
• Intake Manifold/Throttle body/other extras… $50.00
• Labor to put it all together, break in, tune, fluids, swap, etc… $500.00
• Axles $75.00
• Shift Linkage $50.00
Total: $3,085.00

Your Price for the Longblock kit: $2,600.00

• 1994 Integra LS Hydraulic Transmission $300.00

As of right now, I'd just like to sell as a whole complete swap, or in these two individual 'chunks'... please do not ask "How much for one injector... I lost mine" or... "I could really use a waste gate, how much for yours?"

MrToasty

Bump!

MrToasty

Bump for... nothing being sold yet!

carbon fiber coupe

iTrader: (2)

sent you a text..

MrToasty

NEW PRICE!

$1800 through paypal gets you the turbo kit. I'll pay shipping.