FS: B18C5 fully built no miles with 1996 integra RS body PICS. CT.
09-16-2007, 02:18 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: New Haven, CT, USA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
FS: B18C5 fully built no miles with 1996 integra RS body PICS. CT.NEW PICS OF BODY
OBO OBO OBO
Low ballers welcome let make a deal paypal or cash pick up or ship
THIS CAR NEEDS TO BE SOLD NO OFFER WILL BE IGNORED! PM OR POST.
wow this car has a lot into it the car needs to move i have moved on but the car is still in my drive way. located in CT looking to sell offer up looking for 10,000 no bites lets start the offers going. looking to sell no more attachment looking to deal. all parts and recipts have not been used just professionally assembled and never run. pics of the ports are exhaust ports to prove that the car has never run, no carbon just as clean as when it left port flow. again looking to deal
ALL PARTS ARE BRAND NEW YOU GET WHAT YOU PAY FOR all high quality partsTHIS IS NEW NEVER RUN STUFF
what do people want to see pics of??? the parts are quality and all prices are obo lets go buy some stuff!!!
4000 for the bottom end short block
eagle crank eagle rods arais pistion oring and sleeved golden eagle block coted barings crank and rod. stock oil pan tapped for turbo. brand new. balanced and blue printed and assembled by golden eagle all recipts on hand.
all prices are obo.
eagle crank 665
arias pistion 499
main stud kit 88.99
bearing set 115
high performance coating 150.00
line bore 250
hd sleeves 850.00
oring groove 50.00
balance assembly 165.00
chmfer crank 165.00
blue print block 475
clean block 30.00
rods 380.00
=3718.00 with out the cost of the block and the oem gaskets
all brand new never ran just been sitting for about 2 years in my garage assembled waiting for fuel.
also moroso oil pan is avaible
1500 or best offer for turbo kit
turbo is an 18 g with a larger internals the origional turbo siezed and failed internaly sent it out to be rebuilt and upgraded at Majestic Turbo 815 Jefferson Ave. Waco, Texas 767 the housing was modded to fit larger center section the output power is to be estimated at 600hp with proper wastegate, internaly gated at around 400hp. comes with new oil feed line,new oil return, greddy down pipe factory non adjustable blue box, new factory exhaust gasket, greddy install wiring diagram for blue box, non intercooled charge pipes will come with it also. intercooler PWR 600hp model avaible and greddy type s blowoff valve also avaible. rebuild alone was 1000$.
peter
body 1996 integra rs no sunroof accident free
engine was a swap from hmotors
all seal in engine and trans replaced oem honda seals
new water pump
new t belt
new accessory belts
all oem
new o2 sensor
oem type r trans
new 2000 Type R head from honda of las vegas
fully built head from port flow
head work from port flow turbo port and polish
sodium filled valves
titanium retainers
dual high tension valve spring
stage 3 axles
arias 8.5:1 pistons
eagle rods
eagle crank
engine assembled and blue printed by golden eagle
sleeved and bored to 2.0l
auto meter gauges
greddy blue box
aem big brake rotor upgrade
mugen steering wheel
greddy boost gauge
fluidyne radiator
slim fans
6 puck clutch master clutch kit
light steel flywheel
greddy 18g turbo kit
new turbo
all brand new parts car has never been started
started project over 3 years ago never finished
i have all receipts for parts purchased
more than 15000 invested
more parts will edit with full part list looking to see what kind of interest is gauged with this post
all original parts also available type r pistons crank etc..
$10000 or best offer
Modified by peterfurnival at 5:12 PM 9/17/2007
Modified by peterfurnival at 4:29 PM 6/15/2008
The hood has hit the windshield cracking the glass I guess the hood wasn’t closed. The driver’s door was replaced due to someone trying to rip the handle off to gain access to the car. Both happened before I started the project/bought the body. I replaced the door because the damage to the old door was a gaping hole where the handle was where they were trying to reach the rods that operate the locks. I just was putting all my money into the drive train and was going to do a jdm front and have the car painted when I was done. Never got that far.
Low ballers welcome let make a deal paypal or cash pick up or ship
THIS CAR NEEDS TO BE SOLD NO OFFER WILL BE IGNORED! PM OR POST.
wow this car has a lot into it the car needs to move i have moved on but the car is still in my drive way. located in CT looking to sell offer up looking for 10,000 no bites lets start the offers going. looking to sell no more attachment looking to deal. all parts and recipts have not been used just professionally assembled and never run. pics of the ports are exhaust ports to prove that the car has never run, no carbon just as clean as when it left port flow. again looking to deal
ALL PARTS ARE BRAND NEW YOU GET WHAT YOU PAY FOR all high quality partsTHIS IS NEW NEVER RUN STUFF
what do people want to see pics of??? the parts are quality and all prices are obo lets go buy some stuff!!!
4000 for the bottom end short block
eagle crank eagle rods arais pistion oring and sleeved golden eagle block coted barings crank and rod. stock oil pan tapped for turbo. brand new. balanced and blue printed and assembled by golden eagle all recipts on hand.
all prices are obo.
eagle crank 665
arias pistion 499
main stud kit 88.99
bearing set 115
high performance coating 150.00
line bore 250
hd sleeves 850.00
oring groove 50.00
balance assembly 165.00
chmfer crank 165.00
blue print block 475
clean block 30.00
rods 380.00
=3718.00 with out the cost of the block and the oem gaskets
all brand new never ran just been sitting for about 2 years in my garage assembled waiting for fuel.
also moroso oil pan is avaible
1500 or best offer for turbo kit
turbo is an 18 g with a larger internals the origional turbo siezed and failed internaly sent it out to be rebuilt and upgraded at Majestic Turbo 815 Jefferson Ave. Waco, Texas 767 the housing was modded to fit larger center section the output power is to be estimated at 600hp with proper wastegate, internaly gated at around 400hp. comes with new oil feed line,new oil return, greddy down pipe factory non adjustable blue box, new factory exhaust gasket, greddy install wiring diagram for blue box, non intercooled charge pipes will come with it also. intercooler PWR 600hp model avaible and greddy type s blowoff valve also avaible. rebuild alone was 1000$.
peter
body 1996 integra rs no sunroof accident free
engine was a swap from hmotors
all seal in engine and trans replaced oem honda seals
new water pump
new t belt
new accessory belts
all oem
new o2 sensor
oem type r trans
new 2000 Type R head from honda of las vegas
fully built head from port flow
head work from port flow turbo port and polish
sodium filled valves
titanium retainers
dual high tension valve spring
stage 3 axles
arias 8.5:1 pistons
eagle rods
eagle crank
engine assembled and blue printed by golden eagle
sleeved and bored to 2.0l
auto meter gauges
greddy blue box
aem big brake rotor upgrade
mugen steering wheel
greddy boost gauge
fluidyne radiator
slim fans
6 puck clutch master clutch kit
light steel flywheel
greddy 18g turbo kit
new turbo
all brand new parts car has never been started
started project over 3 years ago never finished
i have all receipts for parts purchased
more than 15000 invested
more parts will edit with full part list looking to see what kind of interest is gauged with this post
all original parts also available type r pistons crank etc..
$10000 or best offer
Modified by peterfurnival at 5:12 PM 9/17/2007
Modified by peterfurnival at 4:29 PM 6/15/2008
The hood has hit the windshield cracking the glass I guess the hood wasn’t closed. The driver’s door was replaced due to someone trying to rip the handle off to gain access to the car. Both happened before I started the project/bought the body. I replaced the door because the damage to the old door was a gaping hole where the handle was where they were trying to reach the rods that operate the locks. I just was putting all my money into the drive train and was going to do a jdm front and have the car painted when I was done. Never got that far.
Last edited by peterfurnival; 07-29-2011 at 12:51 PM. Reason: more pics
09-18-2007, 02:48 PM
#2
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: New Haven, CT, USA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: B18C5 fully built no miles with 1996 integra RS body PICS. CT. (peterfurnival)
up possible part out let me know what people want and will quote price
Trending Topics
06-19-2008, 02:52 PM
#13
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: New Haven, CT, USA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: (colinproctor)
the car is a stock body integra with lowered suspension adjustable shocks and motegi rims nothing special if your interested in the vech im me.
ttt
you get what you pay for drive line components are all name brand compay items top dollar paid and assembled by professionals. possible part out im for details if interested
ttt
you get what you pay for drive line components are all name brand compay items top dollar paid and assembled by professionals. possible part out im for details if interested
03-05-2009, 04:54 AM
#19
Junior Member
Join Date: Jun 2004
Location: Danbury, CT
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: B18C5 fully built no miles with 1996 integra RS body PICS. CT.
wow.....i knew that thing sounded familiar. bump for peter! i thought you would never really sell this. good luck with the sale. i have seen this thing in person guys, its the real deal.
