wiring for my alarm.. need help finding a few wires...
#1
Thread Starter
Join Date: Apr 2003
Location: bay area
Posts: 2,282
Likes: 0
Received 0 Likes
on
0 Posts
wiring for my alarm.. need help finding a few wires...
CAR = 93 civic hatch...
well i only need help trying to find where the parking/brake lights wires. ive been searching for all the red/black wiring (parking lights [from what someone told me they were]) and i still cannot get my lights to blink when i arm my system.... any help? thanks alot!
well i only need help trying to find where the parking/brake lights wires. ive been searching for all the red/black wiring (parking lights [from what someone told me they were]) and i still cannot get my lights to blink when i arm my system.... any help? thanks alot!
#3
Greets from just down the road in P'ton!
Check out http://www.the12volt.com/installbay/vehicles.asp - you probably need to register to get your vehicle up
But it's a great site in general, worth enrolling - lots of info on the forums, including a fiberglass forum that has some great info.
Check out http://www.the12volt.com/installbay/vehicles.asp - you probably need to register to get your vehicle up
But it's a great site in general, worth enrolling - lots of info on the forums, including a fiberglass forum that has some great info.
#4
Honda-Tech Member
Join Date: Apr 2004
Location: New York
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Re: (D'Ecosse)
It is right above the fusebox just look for it it will be there in one of those plugs. Stick your multimetter or test light in the plug to verify then you are golden.
#5
Thread Starter
Join Date: Apr 2003
Location: bay area
Posts: 2,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Blazin Civic)
^i found out what one it is... but i hooked my alamr up to it and it still doesnt blink my lights when i lock my car.............i need a nother wire somewhere? thanks for the help guys
#6
It is the red/black wire going to the white connector right above the fuse panel.
What brand alarm is it you have? Is it switching the correct logic? i.e. that needs a + O/P not a -.
What brand alarm is it you have? Is it switching the correct logic? i.e. that needs a + O/P not a -.
Trending Topics
#8
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: (a l3 e)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by a l3 e »</TD></TR><TR><TD CLASS="quote">
^i found out what one it is... but i hooked my alamr up to it and it still doesnt blink my lights when i lock my car.............i need a nother wire somewhere? thanks for the help guys </TD></TR></TABLE>If you found the freeplug that has 12v on it when you turn on the parklights, and you plugged the alarms lightflash output into it, and it is a 12v+ output, [about 5 amps] and it still does not work, then you have a problem with the alarm. 94
^i found out what one it is... but i hooked my alamr up to it and it still doesnt blink my lights when i lock my car.............i need a nother wire somewhere? thanks for the help guys </TD></TR></TABLE>If you found the freeplug that has 12v on it when you turn on the parklights, and you plugged the alarms lightflash output into it, and it is a 12v+ output, [about 5 amps] and it still does not work, then you have a problem with the alarm. 94
Thread
Thread Starter
Forum
Replies
Last Post
davidzhou4893
Honda Civic / Del Sol (1992 - 2000)
13
01-24-2015 10:07 AM