Cheapest place to buy ring terminals?
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Cheapest place to buy ring terminals?
Need to replace some ground wires and battery post wires and need some new ring terminals on my truck. Do local stores like Wal-Mart and autoparts stores carry these in the size for car stuff? Or any recommendations on these for cheap?
#2
Honda-Tech Member
Join Date: Mar 2006
Location: Hattiesburg, MS
Posts: 1,430
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cheapest place to buy ring terminals?
MOST, autoparts retailers carry up to 10 gauge in most instances as insulated terminals, you can get non insulated terminals in up to 4 gauge usually as well, most audio shops should commonly carry every size up to 4 gauge, and 1/0 gauge - but somtimes those are set screw, alternative is a welding supplier, i used to buy 1/0 gauge terminals there for $2 each, not bad considering the streetwires brand terminals are about $5-$10 each.
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cheapest place to buy ring terminals?
MOST, autoparts retailers carry up to 10 gauge in most instances as insulated terminals, you can get non insulated terminals in up to 4 gauge usually as well, most audio shops should commonly carry every size up to 4 gauge, and 1/0 gauge - but somtimes those are set screw, alternative is a welding supplier, i used to buy 1/0 gauge terminals there for $2 each, not bad considering the streetwires brand terminals are about $5-$10 each.
mm not sure. for now at least, i just want to change out my battery/ground terminals and wires cuz the post is messed up and need to be replaced, it doesn't clamp down anymore so i can get it running. so like two 8 gauge and one 4 gauge, still need to make sure the gauge size of those.
Thread
Thread Starter
Forum
Replies
Last Post