integra-modder

Alpine SPR-176A Component set



Ive done this install before, and this is what it ends up looking if you use the provided mounts given to you in the component set.


I want to try to keep the stock tweeter screen, basically the stock look. I want to try to not hack up the tweeter itself.

The problem comes in when the stock tweeter is about the size of a quater and the Alpine tweeter is about the size of a silver dollar.

If anyone has done this, let me know how.


Thanks

95LSDOHC

i think u can just file down the inside of the stock tweeter grill to make room. I'm pretty sure thats what a friend of mine did with his mb quart tweeters...he has the stock grills still, so it must be possible. hope that helps

GAtegs

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95LSDOHC &raquo;</TD></TR><TR><TD CLASS="quote">i think u can just file down the inside of the stock tweeter grill to make room. I'm pretty sure thats what a friend of mine did with his mb quart tweeters...he has the stock grills still, so it must be possible. hope that helps </TD></TR></TABLE>

I did this with my Quarts too. I have a gen3 teg.

integra-modder

yea, thats what I ended up doing....

I just took the liberty of hacking my tweeter instead of the stock honda parts



I was, uhhh, aiming for, umm....for the ultimate in weight reduction

integra-modder

This is what the finished product looks like on the door panel...ridiculously stock...

Medek

im about to do a tweeter install just like the first pic posted.. can anyone give me some info on it.. maybe a step by step? i have no problems removing the panel.. but i wanna know how the holes were cut etc. and how the tweeter looked so flush.. i have the infinity kappam perfect 6.1 component setup

integra-modder

My alpines came in a special mount, the part that the tweeter is connected to has ridges in a circle, around this from the back side a locking ring snaps on to it from the back side and holds it in place...