It's been a loooong progress, but here's the photos in no particular order.
It all started with needing the turbo rebuilt for the shop S2000, so while that was off we decided to tackle the cosmetics. Unfortunately we did not know that the paint was so frail under the hood, and when pulling the harness out for the wire tuck everything got all scratched up making it look worse than before. Thus, starting the full shave project.
AP2 Full Race Turbo Kit
-Relocated Fuse Box
-Relocated EPS Harness
-Custom A/C Lines, Relocated others
-Custom Brake Line
-Relocated HID Ballast and Harness
-Relocated Fluid Washer
-Relocated Wiper Assembly Harness
-Relocated Dash Harness through Firewall
-Relocate secondary fuse box main line
-Relocate headlight grounds
-Extend many many wires (uggh)
-Delete Hood Prop
-Delete Fuse Box Mounts
-Delete Horn Mounts
-Weld 98 Holes shut, Fill, Shave and add addtl metal where needed
Last edited by S2Carbonworks; 11-04-2009 at 10:01 PM.
Here's the car as of today...Blocked and Ready for first of 4 base primer coats. I was a bit late on the progress because I welded in 2 additional gussets to the corner of the engine bay, and 1 lower support brace. It's functional and stronger than before.
No brake line, and 0 wires visible.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.